Table Of Contents

Voice Configuration Menu Codes

Voice Configuration Menu Codes

---

This section contains a quick-reference list of the voice configuration menu options for the Cisco ATA. For information on using the voice configuration menu codes, see Chapter 3, "Configuring the Cisco ATA for MGCP."

This section contains the following tables:

• Cisco ATA Voice Menu Codes—Information Options

• Cisco ATA Voice Menu Codes—Configuration Parameters

• Cisco ATA  Voice Menu Codes—Software Upgrade

---

Note Follow each voice menu code with #.

---

---

Note The term Cisco ATA refers to both the Cisco ATA 186 and the Cisco ATA 188, unless otherwise stated.

---

Table A-1 lists codes to return basic Cisco ATA information.

Table A-1 Cisco ATA Voice Menu Codes—Information Options 

Option	Voice Menu Code	Description
Build information	123123	Build date of the Cisco ATA software
Review IP address	21	Returns IP address of the Cisco ATA
Review MAC address	24	Returns MAC address of the Cisco ATA
Review network route IP address	22	Returns IP address of the network route
Review subnet mask	23	Returns subnet mask of the network route
Version number	123	Returns version number of the Cisco ATA software

Table A-2 lists configuration codes. For additional information about these parameters, see " Chapter 5, "Parameters and Defaults."

Table A-2 Cisco ATA Voice Menu Codes—Configuration Parameters 

Option	Voice Menu Code	Description
Audio mode	312	Allows finer control of the audio component to suit certain user applications
Caller ID method	316	Specifies the signal format when generating the Caller ID format to use
CA0orCM0	5	Primary call agent
CA1orCM1	6	Alternate call agent
Connection mode	311	Controls the connection mode of the call signaling protocol
Dynamic Host Configuration Protocol (DHCP)	20	Controls whether the Cisco ATA can automatically obtain configuration parameters from a server over the network
DNS 1 IP	916	IP address of the primary DNS server
DNS 2 IP	917	IP address of the secondary DNS server
Domain	931	Determines how the domain name portion of the endpoint identifier is constructed.
EPID0or SID0	46	MGCP endpoint ID for line 0 (Phone 1 port)
EPID1or SID1	47	MGCP endpoint ID for line 1 (Phone 2 port)
Static IP address	1	IP address of the Cisco ATA
LBR codec	300	Low-bit-rate codec selection
Media port	202	Specifies which base port the Cisco ATA uses to receive RTP media streams.
MGCPPort	201	The listening port for MGCP messages on the Cisco ATA
MGCP protocol	38	Selects the signaling protocol
MGCPVer	206	MGCP version string
NPrintf address	81	IP address of a host to which all Cisco ATA debug messages are sent
NumTXFrames	35	Sets the default RTP packet size
OpFlags	323	Enables operational features
PrfCodec	36	Specifies the preferred default codec
RetxIntv	203	First retransmission interval
RetxLim	205	Maximum number or times the Cisco ATA retransmits commands
Set password	7387277	Configuration interface password
Signal timers	318	Timeout values controlling the starting or stopping of a signaling event
Static network route address	2	Network router address
Static subnet mask	10	Specifies the subnet mask for the Cisco ATA.
TFTP URL	905	IP address of the TFTP server when TFTP configuration is used
UDP ToS bits	255	Determines the precedence and delay of UDP IP packets
Use TFTP	305	Enables TFTP as configuration method
VLANSetting	324	Enables VLAN ID and 802.1Q priority for Voice Audio IP packet and Signaling IP packet

Table A-3 lists codes used in the software upgrade process. For information about these codes, see "Upgrading the Cisco ATA Signaling Image."

Table A-3 Cisco ATA  Voice Menu Codes—Software Upgrade 

Option	Voice Menu Code	Description
Upgrade software	100	Used in the software process to enter the IP address of the PC
Upgrade language to English	101	Changes or upgrades the voice prompt language to English when upgrading software

Posted: Thu Feb 9 13:16:35 PST 2006
All contents are Copyright © 1992--2006 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.