|
|
10/100BASE-T data port 1-4
10/100BASE-T hub 1-4
10BASE-T uplink Ethernet port 1-4
802.1Q VLAN ID 3-3
802.1Q VLAN ID configuration 5-22
atadefault.cfg default configuration file 3-5, 3-11
atapname.exe tool 3-10
AudioMode parameter 5-16, 6-2, 6-6
audio operating mode configuration 5-16
binary conversion of configuration files 3-9
brackets for IP address of endpoint identifier setting 5-17
BusyTone 5-26
CA0UID 5-11
CA1UID 5-11
cabling requirements 2-3
Caller ID format configuration 5-18
CallerIdMethod parameter 5-18
call waiting period configuration 5-23
CallWaitTone 5-28
CDP discovery setting 5-21
CfgInterval parameter 3-2, 3-6, 5-5
Cisco Discovery Protocol (CDP) 3-2
CodecName 5-13
configuration 5-13
codec negotiation in sending fax 5-17
codecs 4-2
conference connection mode setting 5-17
conferences 1-2
configurable features and related parameters 3-7
configuration 5-21
802.1Q VLAN ID 5-22
alternate Call Agent 5-9
atadefault.cfg file 3-11
audio operating mode 5-16
basic steps in non-TFTP setting 3-6
basic steps in TFTP setting 3-5
brackets for IP address of endpoint identifier setting 5-17
Caller ID format 5-18
syntax 5-24
call waiting period 5-23
CDP discovery setting 5-21
disabling 5-16
codec names 5-13
conference connection mode setting 5-17
connection mode 5-16
creating file of common parameters 3-8
default file 3-5
default values 5-2
domain-name portion of endpoint ID 5-19
DtmfMethod 5-16
endpoint identifiers 5-8
fax CNG tone detection 5-16
fax pass-through redundancy setting 5-17
G.711µ-law setting for fax pass-through 5-17
G.711A-law setting for fax pass-through 5-17
G.711 silence suppression 5-16
G.729 codec setting by port 5-17
hook flash time 5-23
IP precedence (Tos bit ) of UDP packets 5-20
listening port 5-12
low-bit-rate codecs 5-14
making changes to file 3-10
maximum retransmission of commands 5-12
NCS-compliant Session Description Protocol (SDP) setting 5-17
NSE payload type 5-17
CA0UID 5-11
CA1UID 5-11
CallerIdMethod 5-18
CodecName 5-13
ConnectMode 6-3
DHCP 5-7
DNS2IP 5-19
MediaPort 5-30
MGCPPort 5-12
MGCPVer 5-11
NumTxFrames 5-20
OpFlags 5-21
RetxIntv 5-12
RetxLim 5-12
SigTimer 5-22
StaticIp 5-7
StaticNetMask 5-8
StaticRoute 5-7
TftpURL 5-5
ToConfig 5-4
TraceFlags 5-30
UseMGCP 5-10
VLANSetting 5-22
persistent hook-flash events setting 5-17
persistent on-hook and off-hook events setting 5-17
PING period 5-23
preferred codec 5-15
primary Call Agent 5-9
primary domain name server IP address 5-18
quarantine handling mode setting 5-17
retransmission interval 5-12
ring cadence pattern 5-23
RSIP*@ipaddress syntax setting 5-17
RTP media port 5-30
RTP packet size 5-20
secondary domain name server IP address 5-19
static network router probing 5-21
text file template 5-2
TFTP filename setting 5-21
tones 5-24
VLAN CoS bit value (802.1P priority) for TCP packets 5-22
VLAN CoS bit value (802.1P priority) for UDP packets 5-22
VLAN ID specifications setting 5-21
VLAN IP encapsulation setting 5-21
connection mode configuration 5-16
ConnectMode parameter 6-3
converting configuration files to binary format 3-9
creating configuration files 3-8
debugging 8-4
debugging with prserv program 8-4
default configuration file 3-5
default values 3-8
DHCP parameter 5-7
DialTone 5-26
disabling CDP discovery 3-3
disabling VLAN encapsulation 3-3
disabling VLAN IP encapsulation 3-3
DNS2IP parameter 5-19
domain-name portion of endpoint ID configuration 5-19
downloading Cisco ATA software from CCO 3-6, 3-7
downloading signaling protocol software 3-7
DtmfMethod configuration 5-16
duplexity 1-4
dynamic payload type 5-17
electrical specifications B-2
enabling user-specified voice VLAN ID 3-3
encrypted configuration files 3-11
encryption examples 3-11
encryption key 3-11
encryption key configuration 5-6
EncryptKey 3-11
EncryptKey parameter 3-11, 5-6, 8-5
endpoint identifiers 4-2
endpoint identifiers configuration 5-8
endpoints and connections 4-3
entering numeric values 3-17
environmental specifications B-2
Ethernet ports 1-4
fax CNG tone detection configuration 5-16
fax pass-through 5-17
redundancy setting 5-17
fax pass-through mode 6-1
fax relay disabling 6-5
debugging 6-8
features 3-7
features and related configuration parameters 3-7
Foreign Exchange Station ports 1-4
forgotten password 3-18
frequently asked questions 8-5
function button 1-4, 1-5, 3-3, 7-1, 8-1
FXS ports 1-4
G.711µ-law setting for fax pass-through 5-17
G.711A-law setting for fax pass-through 5-17
G.711 silence suppression configuration 5-16
G.729 codec setting by port 5-17
hexadecimal address determination 3-10
hook flash time configuration 5-23
HTTP refresh 5-21
HTTP reset 5-21
immunity specifications B-2
impedance 1-4
Include command 3-9
input ports 2-5
IP precedence (Tos bit ) of UDP packets 5-20
listening port configuration 5-12
local connection options 4-7
low-bit-rate codec 5-16
configuration 5-14
MAC address 3-10
maximum retransmission of commands 5-12
MediaPort parameter 5-30
MGCPPort 5-12
MGCPVer 5-11
MGCP version string configuration 5-11
names and defaults 5-1
NCS-compliant Session Description Protocol (SDP) setting 5-17
network connectivity 3-14
network requirements 2-2
NSE payload type configuration 5-17
NumTxFrames parameter 5-20
obtaining Cisco ATA hexadecimal address 3-10
obtaining configuration file from TFTP 3-12
obtaining network connectivity 3-14
Operating Parameters 5-10
operating parameters 5-6
OpFlags parameter 5-21
overview of configuration methods 3-1
required 4-2
persistent events 4-8
persistent hook-flash events setting 5-17
persistent on-hook and off-hook events setting 5-17
physical interfaces B-3
physical specifications B-1
PING period configuration 5-23
configuration 5-29
power-down procedure 2-6
preferred-codec configuration 5-15
primary domain name server IP address configuration 5-18
quarantine handling mode setting 5-17
refreshing the Cisco ATA configuration 3-6, 3-18, 3-22
refresh interval 4-2
refresh interval configuration 5-5
registration process with MGCP 4-4
reorder tone 5-27
resetting the Cisco ATA 3-22
resetting the Cisco ATA to its factory default values 3-18
retransmission interval configuration 5-12
RetxIntv 5-12
RetxLim 5-12
Ringback Tone 5-28
ringer cadence pattern configuration 5-23
ringing characteristics B-3
ring loads 8-5
RJ-11 telephone ports 1-4
RSIP*@ipaddress syntax setting 5-17
rtpcatch 6-12, 6-13, 6-15, 6-16, 6-17, 6-19
RTP payload type 5-17
safety recommendations 2-2
scaling factor calculation 5-25
secondary domain name server IP address configuration 5-19
services 3-7
services and related and configuration parameters 3-7
Session Description Protocol (SDP) 1-2
session management 1-2
setting the codec 4-2
SigTimer parameter 5-22
sk_example.txt text file 5-2
software features 1-5
software specifications (all protocols) B-3
specifying a preconfigured VLAN ID 3-3
specifying VLAN CoS bit value (802.1P priority) for UDP packets 3-3
specifying VLAN CoS bit value for TCP packets 3-3
standard payload type 5-17
StaticIP parameter 5-7
StaticNetMask parameter 5-8
static network router probing setting 5-21
StaticRoute parameter 5-7
target endpoint 1-2
TFTP configuration filename configuration setting 5-21
TftpURL parameter 5-5
tones 5-24
recommended values 5-25
TraceFlags parameter 5-30
upgradecode parameter 3-5
upgrading signaling image 3-5
upgrading software from TFTP server 7-1
UseMGCP 5-10
User Interface (UI) Parameters 5-3
UseTFTP parameter 5-4
using a DHCP server 3-13
VLAN ID example 3-4
VLAN-related parameters 3-3
VLANSetting parameter 5-22
voice ports 1-1
web-based configuration setting 5-21
Posted: Wed Jul 30 16:33:37 PDT 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.