cc/td/doc/product/software/ios124/124cr
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table Of Contents

Introduction


Introduction


Novell Internet Packet Exchange (IPX) is derived from the Xerox Network Systems (XNS) Internet Datagram Protocol (IDP). One major difference between the IPX and XNS protocols is that they do not always use the same Ethernet encapsulation format. A second difference is that IPX uses Novell's proprietary Service Advertising Protocol (SAP) to advertise special network services.

Our implementation of Novell's IPX protocol has been certified as providing full IPX router functionality.

Use the commands in this book to configure and monitor Novell IPX networks. For IPX configuration information and examples, see the Cisco IOS Novell IPX Configuration Guide.


Note For all commands that previously used the keyword novell, this keyword has been changed to ipx. You can still use the keyword novell in all commands.


The Next Hop Resolution Protocol (NHRP) for IPX will no longer be available after Cisco IOS Release 12.2(13)T. NHRP for IPX documentation in the Cisco IOS AppleTalk and Novell IPX Command Reference , Release 12.2 can be accessed at: http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fatipx_r/ipx/index.htm

The following commands have been removed from documentation in Cisco IOS Software Release 12.2(13)T and will not appear in future releases of the Cisco IOS software documentation set:

clear ipx nhrp

ipx nhrp authentication

ipx nhrp holdtime

ipx nhrp interest

ipx nhrp map

ipx nhrp max-send

ipx nhrp network-id

ipx nhrp nhs

ipx nhrp record

ipx nhrp responder

ipx nhrp use

show ipx nhrp

show ipx nhrp traffic

The NetWare Link Services Protocol (NLSP) will no longer be available after Cisco IOS Release 12.2(13)T. NLSP documentation in the Cisco IOS AppleTalk and Novell IPX Command Reference , Release 12.2 can be accessed at: http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fatipx_r/ipx/index.htm

The following commands have been removed from documentation in Cisco IOS Release 12.2(13)T and will not appear in future releases of the Cisco IOS software documentation set:

access-list (NLSP)

area-address

clear ipx nlsp neighbors

clear ipx route

clear ipx traffic

deny (NLSP)

distribute-list in

distribute-list out

distribute-sap-list in

distribute-sap-list out

ipx access-list

ipx advertise-default-route-only

ipx flooding-unthrottled

ipx internal-network

ipx nlsp csnp-interval

ipx nlsp enable

ipx nlsp hello-interval

ipx nlsp hello-multiplier

ipx nlsp lsp-interval

ipx nlsp metric

ipx nlsp multicast

ipx nlsp priority

ipx nlsp retransmit-interval

ipx nlsp rip

ipx nlsp sap

ipx ping-default

ipx potential-pseudonode

ipx route

ipx router

log-adjacency-changes

multicast (NLSP)

permit (NLSP)

redistribute

route-aggregation (NLSP)

show ipx nlsp database

show ipx nlsp neighbors

show ipx nlsp spf-log

show ipx route

show ipx traffic


hometocprevnextglossaryfeedbacksearchhelp

Posted: Thu Jun 1 21:30:48 PDT 2006
All contents are Copyright © 1992--2006 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.