Clear IP Traffic CLI

Table Of Contents

Clear IP Traffic CLI

Clear IP Traffic CLI

The Clear IP Traffic CLI feature introduced the clear ip traffic command to clear all IP traffic statistics on a router instead of reloading the router. For added safety, you will see a confirmation prompt when entering this command.

Configuration Information

Configuration information is included in the "Configuring IP Services" module of the Cisco IOS IP Application Services Configuration Guide, Release 12.4T, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tiapp_c/tichipip.htm

The following section provides information about this feature:

•Monitoring and Maintaining the IP Network

For a complete list of features included in the "Configuring IP Services" module, see the Feature Information Table located toward the end of the module.

Command Reference Information

Command reference information is included in the Cisco IOS IP Application Services Command Reference, Release 12.2SB, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/cr/sbiap_r/index.htm

New or Modified Commands

The following command is modified for this feature:

•clear ip traffic

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2006 Cisco Systems, Inc. All rights reserved.