|
|
April 12, 1999
These release notes describe the Cisco IOS Release 12.0(3)T feature packs for Cisco AS5300 universal access servers and contain the following topics:
This section explains how to use this document and describes feature pack components.
The tables in these release notes contain details about the Cisco feature packs. Use these tables to perform the following tasks before loading a software image onto a router:
1. Use Table 1, "Cisco AS5300 Default Memory and Upgrade Options," for the feature set memory requirements, and the factory-default memory and available memory upgrades for your Cisco AS5300.
2. Use Table 3, "Feature Pack Product Numbers Quick-Reference List," to identify the software image you want to load.
3. Use Table 4, "Cisco Feature Pack Image Filenames and Memory Requirements," to identify your feature pack and the memory required for your feature set, based on the image you load.
4. Use the tables in the "Feature Set Tables" section to identify which features are supported in a feature set image.
A feature pack is a box that contains the following items:
The heart of a feature pack is the CD-ROM that contains software images and the RSL, which is a Windows 95 application that loads an image onto an access router or server. Each feature pack CD-ROM contains at least one Cisco IOS feature set. The CD-ROM booklet, Getting Started with the Router Software Loader, explains how to use the RSL to install the router image. If you cannot use the RSL to load images, you can follow the instructions in the "Alternatives to Using the RSL" section.
Before running the RSL, read the "Installing Software Images Using RSL" section. If you are loading software on a preconfigured router, you should save the router configuration file on your PC before beginning the image download process, as described in Getting Started with the Router Software Loader.
This section describes the following topics:
Table 1 describes the memory requirements and upgrade options for the Cisco AS5300 for Release 12.0(3)T.
| Type of Memory | Default | Upgrade Options |
|---|---|---|
Boot Flash | 8 MB | MEM-8BF-AS53 (from 4MB to 8MB) |
Flash Memory | 8 MB | MEM-16F-AS53 (from 8MB to 16MB) |
DRAM | 32 MB | MEM-64M-AS53 (from 32MB to 64MB) |
The following table lists the interface and modem cards supported by the Cisco AS5300.
| Interface Cards | Modem Cards |
|---|---|
Ethernet/Fast Ethernet (RJ-45) | MICA modems |
ISDN PRI |
|
E1-G.703/G.704 |
|
Channelized T1 |
|
Channelized E1 |
|
The feature packs described in these release notes contain Cisco IOS Release 12.0(3)T software images, some earlier images, and RSL Version 7.3. Before running RSL, read the "Installing Software Images Using RSL" section.
To determine the version of Cisco IOS software that is currently running on your Cisco AS5300, log in to the access server and enter the show version user EXEC command. The following is sample output from the show version command. The version number is indicated on the second line as shown below:
Cisco Internetwork Operating System Software
IOS (tm) 5300 Software (C5300-JS-M), Version 12.0(3)T, RELEASE SOFTWARE
The output includes more information including processor revision numbers, memory amounts, hardware IDs, and partition information.
For information on upgrading to a new software release, refer to the Cisco IOS Software Release 12.0T Upgrade (#819: 1/99) located on CCO.
On CCO, follow this path:
Service and Support: Technical Documents: Product Bulletins: Cisco IOS Software Release 12.0T Upgrade (#819: 1/99)
Table 3 lists the Cisco product numbers of the feature packs supported in this release
| Product Number | Feature Pack Description |
|---|---|
CD53-C-12.0= | Cisco 5300 IP Feature Pack |
CD53-CP-12.0= | Cisco 5300 IP Plus Feature Pack |
CD53-CL-12.0= | Cisco 5300 IP Plus IPSEC 56 Feature Pack |
CD53-CW-12.0= | Cisco 5300 IP Plus 40 Feature Pack |
CD53-B-12.0= | Cisco 5300 Desktop Feature Pack |
CD53-BP-12.0= | Cisco 5300 Desktop Plus Feature Pack |
CD53-A-12.0= | Cisco 5300 Enterprise Feature Pack |
CD53-AP-12.0= | Cisco 5300 Enterprise Plus Feature Pack |
CD53-AL-12.0= | Cisco 5300 Enterprise Plus IPSEC 56 Feature Pack |
CD53-AW-12.0= | Cisco 5300 Enterprise Plus 40 Feature Pack |
Table 4 identifies each feature pack as specified on the router software CD-ROM label, the feature sets in each feature pack, and UNIX and DOS filenames of the images, memory requirements, and RSL installer descriptions.
| Model No. | CD-ROM Title | Image Included and Image Name (UNIX) | Image Name (DOS) | Flash Memory Req'd | Main Memory Req'd | Boot Flash Memory Req'd | Shared Memory Req'd | Software Description |
|---|---|---|---|---|---|---|---|---|
CD53-C-12.0= | Cisco AS5300 IP Feature Pack Release 12.0(3)T1 | IP c5300-i-mz.120-3.T1 |
aaa0404 |
8 MB |
32 MB |
8 MB |
16 MB | Cisco AS5300 IP Feature Set |
CD53-CP-12.0= | Cisco AS5300 IP Plus | IP Plus c5300-is-mz.120-3.T1 |
aaa0405 |
8 MB |
32 MB |
8 MB |
16 MB | Cisco AS5300 IP Plus Feature Set Release 12.0(3)T1 |
CD53-CL-12.0= | Cisco AS5300 IP Plus IPSEC 56 | IP Plus c5300-is56i-mz.120-3.T1 |
aaa0406 |
8 MB |
32 MB |
8 MB |
16 MB | Cisco AS5300 IP Plus Feature Set Release 12.0(3)T1 |
CD53-CW-12.0= | Cisco AS5300 IP Plus 40 | IP Plus c5300-is40-mz.120-3.T1 |
aaa0407 |
8 MB |
32 MB |
8 MB |
16 MB | Cisco AS5300 IP Plus Feature Set Release 12.0(3)T1 |
CD53-B-12.0= | Cisco AS5300 Desktop | Desktop c5300-d-mz.120-3.T1 |
aaa0408 |
8 MB |
32 MB |
8 MB |
16 MB | Cisco AS5300 Desktop Feature Set |
CD53-BP-12.0= | Cisco AS5300 Desktop Plus Feature Pack Release 12.0(3)T1 | Desktop Plus c5300-ds-mz.120-3.T1 |
aaa0409 |
8 MB |
32 MB |
8 MB |
16 MB | Cisco AS5300 Desktop Plus Feature Set Release 12.0(3)T1 |
CD53-A-12.0= | Cisco AS5300 Enterprise Feature Pack Release 12.0(3)T1 | Enterprise c5300-j-mz.120-3.T1 |
aaa0410 |
8 MB |
32 MB |
8 MB |
16 MB | Cisco AS5300 Enterprise Feature Set |
CD53-AP-12.0= | Cisco AS5300 Enterprise Plus Feature Pack Release 12.0(3)T1 | Enterprise Plus c5300-js-mz.120-3.T1 |
aaa0411 |
8 MB |
32 MB |
8 MB |
16 MB | Cisco AS5300 Enterprise Plus Feature Set Release 12.0(3)T1 |
CD53-AL-12.0= | Cisco AS5300 Enterprise Plus Feature Pack Release 12.0(3)T1 | Enterprise Plus c5300-js56i-mz.120-3.T1 |
aaa0411 |
8 MB |
32 MB |
8 MB |
16 MB | Cisco AS5300 Enterprise Plus Feature Set |
CD53-AP-12.0= | Cisco AS5300 Enterprise Plus 40 Feature Pack | Enterprise Plus c5300-js40-mz.120-3.T1 |
aaa0413 |
8 MB |
32 MB |
8MB |
16 MB | Cisco AS5300 Enterprise Plus Feature S et Release 12.0(3)T1 |
The Cisco IOS software is packaged into feature sets (also called images). Many different feature sets are available, and each feature set contains a specific subset of Cisco IOS features. The following conventions are used to identify feature sets:
Cisco IOS images with strong encryption (including, but not limited to, 56-bit DES) are subject to U.S. government export controls and have a limited distribution. Images to be installed outside the U.S. require an export license. Customer orders might be denied or subject to delay due to U.S. government regulations. Contact your sales representative or distributor for more information, or send e-mail to export@cisco.com.
The following list shows which feature sets are supported on the AS5300. These feature sets only apply to Cisco IOS Release 12.0(3)T:
Table 5 lists the features and feature sets supported by the AS5300 in Cisco IOS Release 12.0(3)T and uses the following conventions to identify features:
| Feature | Feature Set | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| IP | IP Plus | IP Plus40 | IP Plus IPSec 56 | IP/ IPX/ AT/ DEC | IP/ IPX/ AT/ DEC Plus | Enter-prise | Enter-prise Plus | Enter- prise Plus 40 | Enter- prise Plus IPSec 56 | |
| IBM Support |
|
|
|
|
|
|
|
|
|
|
APPN High-Performance Routing | No | No | No | No | No | No | No | No | No | No |
APPN MIB Enhancements | No | No | No | No | No | No | No | No | No | No |
APPN over Ethernet LAN Emulation | No | No | No | No | No | No | No | No | No | No |
APPN Scalability Enhancements | No | No | No | No | No | No | No | No | No | No |
Bisync Enhancements:
| No | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes |
Cisco MultiPath Channel (CMPC) | No | No | No | No | No | No | No | No | No | No |
DLSw+ Enhancements:
| No | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes |
FRAS Enhancements:
| No | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes |
RIF Passthru in DLSw+ | No | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes |
TN3270 LU Nailing | No | No | No | No | No | No | No | No | No | No |
TN3270 Server Enhancements | No | No | No | No | No | No | No | No | No | No |
Token Ring LANE | No | No | No | No | No | No | No | No | No | No |
Tunneling of Asynchronous Security Protocols | No | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes |
| Internet |
|
|
|
|
|
|
|
|
|
|
DRP Server Agent | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
DRP Server Agent Enhancements | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| IP Routing |
|
|
|
|
|
|
|
|
|
|
Voice over IP | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Easy IP (Phase 1) | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Easy IP (Phase 2) DHCP Server | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Hot Standby Router Protocol (HSRP) over ISL in Virtual LAN Configurations | No | No | No | No | Yes | Yes | Yes | Yes | Yes | Yes |
IP Enhanced IGRP Route Authentication | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
PIM Version 2 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
TCP Enhancements:
| Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| LAN Support |
|
|
|
|
|
|
|
|
|
|
AppleTalk Access List Enhancements | No | No | No | No | Yes | Yes | Yes | Yes | Yes | Yes |
DECnet Accounting | No | No | No | No | Yes | Yes | Yes | Yes | Yes | Yes |
IPX Named Access Lists | No | No | No | No | Yes | Yes | Yes | Yes | Yes | Yes |
IPX SAP-after-RIP | No | No | No | No | Yes | Yes | Yes | Yes | Yes | Yes |
NLSP Enhancements | No | No | No | No | No | No | Yes | Yes | Yes | Yes |
NLSP Multicast Support | No | No | No | No | Yes | Yes | Yes | Yes | Yes | Yes |
| Management |
|
|
|
|
|
|
|
|
|
|
Cisco Call History MIB Command-Line Interface | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Cisco IOS Internationalization | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Entity MIB, Phase 1 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Process MIB | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
ISDN MIB RFC 2127 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
SNMPv2C | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
SNMPv3 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
SNMP Inform Requests | No | No | No | No | No | No | Yes | Yes | Yes | Yes |
Time-Based Access Lists | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Virtual Profiles | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
VPDN MIB | No | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes |
VPDN MIB and Syslog Facility | No | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes |
| Multimedia |
|
|
|
|
|
|
|
|
|
|
IP Multicast Load Splitting across Equal-Cost Paths | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
IP Multicast over ATM Point-to-Multipoint Virtual Circuits | No | No | No | No | No | No | No | No | No | No |
PIM Version 2 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
IP Multicast over Token Ring LANs | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Stub IP Multicast Routing | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Quality of Service |
|
|
|
|
|
|
|
|
|
|
CLI String Search | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
RTP Header Compression | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
BERT/TDM | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Security |
|
|
|
|
|
|
|
|
|
|
Automated Double Authentication | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Certificate Authority Interoperability | No | No | No | Yes | No | No | No | No | No | Yes |
Double Authentication | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Encrypted Kerberized Telnet | No | No | No | No | No | No | No | No | No | Yes |
HTTP Security | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Internet Key Exchange Security Protocol | No | No | No | Yes | No | No | No | No | No | Yes |
IPSec Network Security | No | No | No | Yes | No | No | No | No | No | Yes |
IPSec with Triple-DES | No | No | No | No | No | No | No | No | No | No |
MS-CHAP Support | No | No | No | No | No | No | Yes | Yes | Yes | Yes |
Named Method Lists for AAA Authentication and Accounting | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Per-User Configuration | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Reflexive Access Lists | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
TCP Intercept | No | No | No | No | No | No | Yes | Yes | Yes | Yes |
Vendor-Proprietary RADIUS Attributes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Vendor-Proprietary RADIUS —Additional Attributes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Switching |
|
|
|
|
|
|
|
|
|
|
AppleTalk Routing over ISL and IEEE 802.10 in Virtual LANs | No | No | No | No | Yes | Yes | Yes | Yes | Yes | Yes |
CLNS and DECnet Fast Switching over PPP | No | No | No | No | No | No | Yes | Yes | Yes | Yes |
DECnet/VINES/XNS over ISL:
| No | No | No | No | No | No | Yes | Yes | No | No |
Fast-Switched Policy Routing | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
IPX Routing over ISL Virtual LANs | No | No | No | No | Yes | Yes | Yes | Yes | Yes | Yes |
VIP Distributed Switching Support for IP Encapsulated in ISL | No | No | No | No | No | No | No | No | No | No |
| Terminal Services |
|
|
|
|
|
|
|
|
|
|
Telnet Extensions for Dialout | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Virtual Templates for Protocol Translation | No | No | No | No | No | No | Yes | Yes | Yes | Yes |
SS7/CCS7 Dial Access Solution (DAS) | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Large Scale Dialout | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| WAN Optimization |
|
|
|
|
|
|
|
|
|
|
ATM MIB Enhancements | No | No | No | No | No | No | No | No | No | No |
PAD Enhancements | No | No | No | No | No | No | Yes | Yes | Yes | Yes |
PAD Subaddressing | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| WAN Services |
|
|
|
|
|
|
|
|
|
|
Always On/Dynamic ISDN (AO/DI) | No | No | No | No | No | No | Yes | Yes | Yes | Yes |
Bandwidth Allocation Control Protocol | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Dialer Watch | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
E1 R2 Country Support1 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
E1 R1 Support for only Taiwan2 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Enhanced Local Management Interface (ELMI) | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Frame Relay Enhancements | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Frame Relay MIB Extensions | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Frame Relay Router ForeSight | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
ISDN Advice of Charge | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
ISDN Caller ID Callback | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
ISDN NFAS | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Layer 2 Forwarding—Fast Switching | No | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes |
Leased-Line ISDN at 128 kbps | No | No | No | No | No | No | No | No | No | No |
Microsoft Point-to-Point Compression (MPPC) | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
MS Callback | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Modem Management Enhancements | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Multiple ISDN Switch Types | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
National ISDN Switch Types for BRI and PRI Interfaces (NI2) | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
PPP over ATM | No | No | No | No | No | No | No | No | No | No |
Stackable Home Gateway | No | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes |
Switched 56K Digital Connections | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Telnet Extensions for Dialout | No | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes |
X.25 Enhancements | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
X.25 on ISDN | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
X.25 Switching between PVCs and SVCs | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
X.28 Emulation
| Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Miscellaneous |
|
|
|
|
|
|
|
|
|
|
Service Provider 1.0 Features | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
This section describes the following topics:
This section covers some solutions to problems you might encounter when installing software images using the RSL. These solutions are additions to the RSL online help.
This installation tip provides a possible recovery solution if you are unable to connect to your access server or router. You can skip this section unless you are experiencing a connection error.
In some cases, you might receive the following error message while connecting to the target access server:
"Failed to configure the router to enable the Cisco IOS software image and configuration
file upload and download operations. You may want to check the router to make sure that
the selected interface exists."
If you encounter this message, especially if one of the following situations applies, try increasing the Short Timeout value higher than 25 seconds in the Options dialog box:
In some cases, the RSL is unable to restore the startup configuration. If this happens, take the following steps:
Step 2 Restart the RSL, and connect by using the Preconfigured router option.
Step 3 When asked if you want to overwrite the existing startup configuration file, choose no.
Step 4 When asked if you want to continue, choose yes.
Step 5 When the router is connected, select Download Router Configuration in the Router Software Loader dialog box.
Step 6 Select the appropriate file, and click the radio button beside Copy configuration to the router nonvolatile memory.
The router should now contain the startup configuration it had before the initial RSL connection. You can now exit the RSL.
The following information about RSL operations can help you with the installation process:
The RSL is designed to work with a PC running Microsoft Windows 95 and is the recommended method for downloading software to the router. The booklet includeds with the CD-ROM explains how to perform this simple install process. However, an alternative is available for installing router software: using a TFTP server application.
The Router Software Loader application contained on the feature pack CD-ROM is designed to work with a PC running Microsoft Windows 95. The booklet included with the CD-ROM explains how to perform this simple and recommended install process. However, an alternative is available using a TFTP or RCP server application to install router software.
For information about how to use TFTP or RCP, see the following location:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/relnote/fprn/loadswfp.htm.
This section describes the documentation related to the Cisco AS5300, typically including hardware installation guides, software installation guides, Cisco IOS configuration and command references, system error messages, and feature modules that are updates to the Cisco IOS documentation set. Documentation is available as printed manuals or electronic documents, except for the feature modules, which are available online only.
The most up-to-date documentation can be found on the Web via Cisco Connection Online (CCO) and on the latest Documentation CD-ROM. These electronic documents might contain updates and modifications made after the paper documents were printed. See the "Cisco Connection Online" section and the "Documentation CD-ROM" section for more information.
This section contains the following subsections:
The following documents are specific to Release 12.0 T. They are located on CCO and the Documentation CD-ROM:
The following list contains the documents specific to the AS5300. These documents are available on CCO and the Documentation CD-ROM.
To access these documents on CCO, follow this path:
Service and Support: Technical Documents: Documentation Home Page: Access Servers and Access Routers: Access Servers: Cisco AS5300
To access these documents on the Documentation CD-ROM, follow this path:
Cisco IOS Software Configuration: Access Servers and Access Routers: Modular Access Routers: Cisco 1600
Feature modules describe new features introduced in 12.0 T releases and are updates to the Cisco IOS documentation set. As updates, the features modules are available online only. The feature module information will be added to the Cisco IOS documentation set before the next printing. Feature modules have a brief overview of the feature, benefits, configuration tasks, and a command reference.
To access the feature modules on CCO, follow this path:
Service and Support: Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.0: New Feature Documentation
To access the feature modules on the documentation CD-ROM, follow this path:
Cisco IOS Software Configuration: Cisco IOS Release 12.0: New Feature Documentation
The Cisco IOS software documentation set consists of the Cisco IOS configuration guides, Cisco IOS command references, and several other supporting documents. These documents are shipped with your order in electronic form on the Documentation CD-ROM, unless you specifically ordered the printed versions.
Each module in the Cisco IOS documentation set consists of two books: a configuration guide and a corresponding command reference. Chapters in a configuration guide describe protocols, configuration tasks, and Cisco IOS software functionality and contain comprehensive configuration examples. Chapters in a command reference provide complete command syntax information. Each configuration guide can be used in conjunction with its corresponding command reference.
To access these documents on CCO, follow this path:
Service and Support: Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.0: Cisco IOS Release 12.0 Configuration Guides and Command References
To access these documents on the Documentation CD-ROM, follow this path:
Cisco IOS Software Configuration: Cisco IOS Release 12.0: Cisco IOS Release 12.0 Configuration Guides and Command References
Table 6 details the contents of the Cisco IOS Release 12.0 software documentation set. The document set is available in electronic form, and also in printed form upon request.
To access the Cisco IOS documentation set on CCO, follow this path:
Service and Support: Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.0
To access the Cisco IOS documentation set on the Documentation CD-ROM, follow this path:
Cisco IOS Software Configuration: Cisco IOS Release 12.0
| Books | Chapter Topics |
|---|---|
| Configuration Fundamentals Overview |
| Transparent Bridging |
| Dial-In Port Setup |
| Interface Configuration Overview |
| IP Addressing |
| AppleTalk |
| Apollo Domain |
| AAA Security Services |
| Switching Paths for IP Networks |
| ATM |
| Voice over IP |
| Classification |
|
|
The following URL contains links and helpful tips on configuring your Cisco products: http://www.cisco.com/kobayashi/serv_tips.shtml.
This URL is subject to change without notice. You can also access this page by following this path from CCO:
Products & Technologies: Technical Tips
"Hot Tips" are popular tips and hints gathered from the Cisco Technical Assistance Center (TAC). Most of these documents are available from the TAC FAX-on-demand service. To access FAX-on-demand and receive documents at your FAX machine, from the USA, call 888-50-CISCO (888-502-4726). From other areas, call 415-596-4408.
The following sections are provided from the Technical Tips page:
Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.
Posted: Sun Sep 16 16:11:54 PDT 2001
All contents are Copyright © 1992--2001 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.