New Features in Release 12.0(31)S

• 4-Port Gigabit Ethernet ISE Line Card for Cisco 12000 Series Internet Router

• Any Transport over MPLS

• ATM CBR and VBR-rt Support

• BGP Route-Map Continue Support for Outbound Policy

• Bidirectional Forwarding Detection

• Building Integrated Timing Source (BITS) for the Cisco 12000 Series Router

• Cisco IOS Software Configuration for the Cisco 10720 Internet Router

• Component Outage On-Line (COOL) Measurement for the Cisco 12000 Series Router

• Exclusive Configuration Change Access (Config Lock)

• IMA Dynamic Bandwidth

• Inter-AS Hybrid for MPLS VPN over IP Tunnels

• IP Receive ACL

• L2VPN Pseudowire Redundancy

• L2VPN Pseudowire Switching

• Layer 2 Tunnel Protocol Version 3

• MPLS Enhancements to Interfaces MIB

• MPLS VPN—Carrier Supporting Carrier

• MPLS VPN—Carrier Supporting Carrier—IPv4 BGP Label Distribution

• MPLS VPNs over IP Tunnels

• Power Management for the Cisco 12000 Series Router

• Pseudowire Emulation Edge-to-Edge MIBs for Ethernet and Frame Relay Services

• QoS: Partial Support for Ingress Hierarchical Policing for the Cisco 12000 4-port Gigabit Ethernet ISE Line Card

• Single-router APS for the Cisco 12000 Series Router

• Unicast RPF for IPv6 on the Cisco 12000 Series

• Onboard Failure Logging