|
|
June 8, 1998
These release notes describe the Cisco IOS Release 11.3(3)T feature packs for Cisco 2500 series routers. Table 1 lists the Cisco product numbers for the supported feature packs.
CD25-C-11.3= | Cisco 2500 IP Feature Pack Release 11.3(3)T |
CD25-CH-11.3= | Cisco 2500 IP/Firewall Feature Pack Release 11.3(3)T |
CD25-CP-11.3= | Cisco 2500 IP Plus Feature Pack Release 11.3(3)T |
CD25-CW-11.3= | Cisco 2500 IP Plus 40 Feature Pack Release 11.3(3)T |
CD25-CY-11.3= | Cisco 200 IP Plus 56 Feature Pack Release 11.3(3)T |
CD25-CL-11.3= | Cisco 2500 IP Plus IPSEC 56 Feature Pack Release 11.3(3)T |
CD25-B-11.3= | Cisco 2500 IP/IPX/AT/DEC Feature Pack release 11.3(3)T |
CD25-BP-11.3= | Cisco 2500 IP/IPX/AT/DEC Plus Feature Pack Release 11.3(3)T |
CD25-BHP-11.3 | Cisco 2500 IP/IPX/AT/DEC/Firewall Plus Feature Pack Release 11.3(3)T |
CD25-AP-11.3= | Cisco 2500 Enterprise Plus Feature Pack Release 11.3(3)T |
CD25-AW-11.3= | Cisco 2500 Enterprise Plus 40 Feature Pack Release 11.3(3)T |
CD25-AY-11.3= | Cisco 2500 Enterprise Plus 56 Feature Pack Release 11.3(3)T |
CD25-AL-11.3= | Cisco 2500 Enterprise Plus IPSEC 56 Feature Pack Release 11.3(3)T |
CD25-AHY-11.3= | Cisco 2500 Enterprise/ Firewall Plus 56 Feature Pack Release 11.3(3)T |
CD25-AHL-11.3= | Cisco 2500 Enterprise/ Firewall Plus IPSEC 56 Feature Pack Release 11.3(3)T |
CD25-E-11.3= | Cisco 2500 Remote Access Server Feature Pack Release 11.3(3)T |
This document contains the following sections:
The RSL supports the following Cisco 2500 series routers:
The heart of a Cisco IOS software feature pack is a CD-ROM that contains a software image and the Router Software Loader (RSL), a Windows 95 application that loads the image onto the access router or server. Each Cisco IOS Release 11.2 feature pack CD contains one feature set. The CD booklet, Getting Started with the Router Software Loader, explains how to use the RSL to install the router software. Users who cannot use the RSL can load images by following the instructions in the "Installing the Router Software Using a TFTP Server Application" section of this document.
Each Cisco IOS Release 11.2 software feature pack box contains the following:
Before running the RSL, read the section, "Installing Software Images Using RSL". If you are loading software on a preconfigured router, you should save the router configuration file on your PC before beginning the download process, as described in the CD booklet Getting Started with the Router Software Loader.
The tables in this release note describe the Cisco feature packs. Use these tables to perform the following tasks before loading a software image onto a router:
1. Use Table 1 on page 1 to identify your software image.
2. Use Table 2 in the section "Cisco Feature Pack and Memory Descriptions" to identify your feature pack and the memory required for your feature set, based on the image you run.
3. Check the memory required for your feature set against Table 3 in the section "Upgrading Cisco 2500 Memory" to determine the factory-default memory on the router and the available memory upgrades.
4. Use Table 4 and Table 5 in the section "Cisco IOS Release 11.3(3)T Feature Sets" to identify which features are supported in a feature set image on a specific platform.
Table 2 identifies each feature pack as specified on the router software CD-ROM label, describes the feature sets in each feature pack, and lists the following: UNIX and DOS filenames of the images, router platform on which each feature set runs, and memory requirements for each feature set.
Table 3 describes the memory delivered by default and the available memory upgrades.
The Cisco IOS software is packaged into "feature sets" (also called "software images"). There are many different feature sets available, and each feature set contains a specific subset of Cisco IOS features. The following conventions are used to identify feature sets:
Cisco IOS images with strong encryption (including, but not limited to, 56-bit DES) are subject to U.S. government export controls and have a limited distribution. Images to be installed outside the U.S. require an export license. Customer orders might be denied or subject to delay due to U.S. government regulations. Contact your sales representative or distributor for more information, or send e-mail to export@cisco.com.
The following list shows which feature sets are supported on the Cisco 2500 series routers and access servers. These feature sets only apply to Cisco IOS Release 11.3 T:
To determine what features are available with each feature set (software image), see Table 4 and Table 5. The tables summarize the features you can use when running a specific feature set on the Cisco 2500 series routers for Cisco IOS Release 11.3T. The feature set tables use the following symbol conventions to identify features:
| Feature Set | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Feature | IP | IP Plus | IP Plus 401 | IP Plus 561 | IP Plus IPSEC 562 | ISDN | IP/IPX/ AT/ DEC | IP/IPX/ AT/ DEC Plus | IP/ IBM/ APPN | Enter- prise Plus | Enter- prise Plus 401 | Enter- prise Plus 561 |
| IBM Support |
|
|
|
|
|
|
|
|
|
|
|
|
APPN High Performance Routing | No | No | No | No | No | No | No | No | Yes | No | No | No |
APPN MIB Enhancements | No | No | No | No | No | No | No | No | Yes | No | No | No |
APPN over Ethernet LAN Emulation | No | No | No | No | No | No | No | No | Yes | No | No | No |
APPN Scalability Enhancements | No | No | No | No | No | No | No | No | Yes | No | No | No |
Bisync Enhancements, includes:
| No | Yes | Yes | Yes | Yes | No | No | Yes | No | Yes | Yes | Yes |
Cisco MultiPath Channel (CMPC) | No | No | No | No | No | No | No | No | No | No | No | No |
DLSw+ Enhancements, includes:
| No | Yes | Yes | Yes | Yes | No | No | Yes | Yes | Yes | Yes | Yes |
FRAS Enhancements, includes:
| No | Yes | Yes | Yes | Yes | No | No | Yes | Yes | Yes | Yes | Yes |
RIF Passthru in DLSw+ | No | Yes | Yes | Yes | Yes | No | No | Yes | Yes | Yes | Yes | Yes |
SRB over FDDI on Cisco 4000, 450, and 4700 Series Routers | No | No | No | No | No | No | No | No | No | No | No | No |
TN3270 LU Nailing | No | No | No | No | No | No | No | No | No | No | No | No |
TN3270 Server Enhancements | No | No | No | No | No | No | No | No | No | No | No | No |
Token Ring LANE | No | No | No | No | No | No | No | No | No | No | No | No |
Tunneling of Asynchronous Security Protocols | No | Yes | Yes | Yes | Yes | No | No | Yes | No | Yes | Yes | Yes |
| Internet |
|
|
|
|
|
|
|
|
|
|
|
|
DRP Server Agent | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes |
DRP Server Agent Enhancements | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes |
| IP Routing |
|
|
|
|
|
|
|
|
|
|
|
|
Easy IP (Phase 1) | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Hot Standby Router Protocol (HSRP) over ISL in Virtual LAN Configurations | No | No | No | No | No | No | No | No | No | No | No | No |
IP Enhanced IGRP Route Authentication | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
TCP Enhancements, includes:
| Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| LAN Support |
|
|
|
|
|
|
|
|
|
|
|
|
AppleTalk Access List Enhancements | No | No | No | No | No | No | Yes | Yes | No | Yes | Yes | Yes |
DECnet Accounting | No | No | No | No | No | No | Yes | Yes | No | Yes | Yes | Yes |
IPX Named Access Lists | No | No | No | No | No | Yes | Yes | Yes | No | Yes | Yes | Yes |
IPX SAP-after-RIP | No | No | No | No | No | Yes | Yes | Yes | No | Yes | Yes | Yes |
NLSP Enhancements | No | No | No | No | No | No | No | No | No | Yes | Yes | Yes |
NLSP Multicast Support | No | No | No | No | No | No | Yes | Yes | No | Yes | Yes | Yes |
| Management |
|
|
|
|
|
|
|
|
|
|
|
|
Cisco Call History MIB Command Line Interface | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Cisco IOS Internationalization | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Entity MIB, Phase 1 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
SNMP Inform Requests | No | No | No | No | No | No | No | No | Yes | Yes | Yes | Yes |
SNMPv2C | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes |
Virtual Profiles | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
VPDN MIB and Syslog Facility | No | Yes | Yes | Yes | Yes | No | No | Yes | No | Yes | Yes | Yes |
| Multimedia |
|
|
|
|
|
|
|
|
|
|
|
|
IP Multicast Load Splitting across Equal-Cost Paths | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
IP Multicast over ATM Point-to-Multipoint Virtual Connections | No | No | No | No | No | No | No | No | No | No | No | No |
IP Multicast over Token Ring LANs | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
PIM Version 2 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Stub IP Multicast Routing | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Quality of Service |
|
|
|
|
|
|
|
|
|
|
|
|
RTP Header Compression | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes | Yes |
| Security |
|
|
|
|
|
|
|
|
|
|
|
|
Additional Vendor-Proprietary RADIUS Attributes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Automated Double Authentication | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | No | Yes | Yes | Yes |
Certificate Authority Interoperability | No | No | No | No | Yes | No | No | No | No | No | No | No |
Cisco IOS Firewall: Context-Based Access Control | No | No | No | No | No | No | No | No | No | No | No | No |
Double Authentication | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Encrypted Kerberized Telnet | No | No | No | No | No | No | No | No | No | No | No | Yes |
HTTP Security | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Internet Key Exchange Security Protocol | No | No | Yes | Yes | Yes | No | No | No | No | No | Yes | Yes |
IPSec Network Security | No | No | Yes | Yes | Yes | No | No | No | No | No | Yes | Yes |
MS-CHAP Support | No | No | No | No | No | No | No | No | No | Yes | Yes | Yes |
Named Method Lists for AAA Authentication & Accounting | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Per-User Configuration | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Reflexive Access Lists | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | No | Yes | Yes | Yes |
TCP Intercept | No | No | No | No | No | No | No | No | No | Yes | Yes | Yes |
Vendor-Proprietary RADIUS Attributes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes |
| Switching |
|
|
|
|
|
|
|
|
|
|
|
|
AppleTalk Routing over ISL and IEEE 802.10 in Virtual LANs | No | No | No | No | No | No | No | No | No | No | No | No |
CLNS and DECnet Fast Switching over PPP | No | No | No | No | No | No | No | No | No | Yes | Yes | Yes |
DECnet/VINES/XNS over ISL, includes:
| No | No | No | No | No | No | No | No | No | Yes | Yes | Yes |
Fast-Switched Policy Routing | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
IPX Routing over ISL | No | No | No | No | No | No | No | No | No | No | No | No |
VIP Distributed Switching Support for IP Encapsulated in ISL | No | No | No | No | No | No | No | No | No | No | No | No |
| Terminal Services |
|
|
|
|
|
|
|
|
|
|
|
|
Virtual Templates for Protocol Translation | No | No | No | No | No | No | No | No | No | Yes | Yes | Yes |
| WAN Optimization |
|
|
|
|
|
|
|
|
|
|
|
|
ATM MIB Enhancements | No | No | No | No | No | No | No | No | No | No | No | No |
PAD Enhancements | No | No | No | No | No | No | No | No | No | Yes | Yes | Yes |
PAD Subaddressing | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes | Yes |
| WAN Services |
|
|
|
|
|
|
|
|
|
|
|
|
Always On/Dynamic ISDN (AO/DI) | No | No | No | No | No | No | No | No | No | Yes | Yes | Yes |
Bandwidth Allocation Control Protocol | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | No | Yes | Yes | Yes |
Dialer Watch | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes | Yes |
Enhanced Local Management Interface (ELMI) | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes | Yes |
Frame Relay Enhancements | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes | Yes |
Frame Relay MIB Extensions | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes | Yes |
Frame Relay Router ForeSight | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes | Yes |
ISDN Advice of Charge | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
ISDN Caller ID Callback | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
ISDN NFAS | No | No | No | No | No | No | No | No | No | No | No | No |
Layer 2 Forwarding—Fast Switching | No | Yes | Yes | Yes | Yes | No | No | Yes | No | Yes | Yes | Yes |
Leased Line ISDN at 128 kbps | No | No | No | No | No | No | No | No | No | No | No | No |
Microsoft Point-to-Point Compression | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
MS Callback | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Multiple ISDN Switch Types | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
National ISDN Switch Types for BRI and PRI Interfaces | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
PPP over ATM | No | No | No | No | No | No | No | No | No | No | No | No |
Telnet Extensions for Dialout | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes |
X.25 Enhancements | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes | Yes |
X.25 on ISDN | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes | Yes |
X.25 Switching between PVCs and SVCs | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes | Yes | Yes |
X.28 Emulation | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | No | Yes | Yes | Yes |
| 1This image is not available in Releases 11.3(1)T and 11.3(2)T. It is available in Release 11.3(3)T and later 11.3 T releases. 2This image is available in Release 11.3(3)T and later releases. |
| Feature Set | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Feature | Enter- prise Plus IPSEC562 | Enter- prise/ APPN Plus | Enter- prise/ APPN Plus 401 | Enter- prise/ APPN Plus 561 | Enter- prise/ APPN Plus IPSEC 562 | Remote Access Server | IP FIRE- WALL2 | IP/IPX/ AT/DEC FIRE- WALL Plus2 | Enter- prise/ FIRE- WALL Plus 562 | Enter- prise/ FIRE- WALL Plus IPSEC 562 |
| IBM Support |
|
|
|
|
|
|
|
|
|
|
APPN High Performance Routing | No | Yes | Yes | Yes | Yes | No | No | No | No | No |
APPN MIB Enchancements | No | Yes | Yes | Yes | Yes | No | No | No | No | No |
APPN over Ethernet LAN Emulation | No | Yes | Yes | Yes | Yes | No | No | No | No | No |
APPN Scalability Enhancements | No | Yes | Yes | Yes | Yes | No | No | No | No | No |
Bisync Enhancements, includes:
| Yes | Yes | Yes | Yes | Yes | No | No | Yes | Yes | Yes |
Cisco MultiPath Channel (CMPC) | No | No | No | No | No | No | No | No | No | No |
DLSw+ Enhancements, includes:
| Yes | Yes | Yes | Yes | Yes | No | No | Yes | Yes | Yes |
FRAS Enhancements, includes:
| Yes | Yes | Yes | Yes | Yes | No | No | Yes | Yes | Yes |
RIF Passthru in DLSw+ | Yes | Yes | Yes | Yes | Yes | No | No | Yes | Yes | Yes |
SRB over FDDI on Cisco 4000, 4500, and 4700 Series Routers | No | No | No | No | No | No | No | No | No | No |
TN3270 LU Nailing | No | No | No | No | No | No | No | No | No | No |
TN3270 Server Enhancements | No | No | No | No | No | No | No | No | No | No |
Token Ring LANE | No | No | No | No | No | No | No | No | No | No |
Tunneling of Asynchronous Security Protocols | Yes | Yes | Yes | Yes | Yes | No | No | Yes | Yes | Yes |
| Internet |
|
|
|
|
|
|
|
|
|
|
DRP Server Agent | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
DRP Server Agent Enhancements | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
| IP Routing |
|
|
|
|
|
|
|
|
|
|
Easy IP (Phase 1) | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
Hot Standby Router Protocol (HSRP) over ISL in Virtual LAN Configurations | No | No | No | No | No | No | No | No | No | No |
IP Enhanced IGRP Route Authentication | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
TCP Enhancements, includes:
| Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
| LAN Support |
|
|
|
|
|
|
|
|
|
|
AppleTalk Access List Enhancements | Yes | Yes | Yes | Yes | Yes | No | No | Yes | Yes | Yes |
DECnet Accounting | Yes | Yes | Yes | Yes | Yes | No | No | Yes | Yes | Yes |
IPX Named Access Lists | Yes | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes |
IPX SAP-after-RIP | Yes | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes |
NLSP Enhancements | Yes | Yes | Yes | Yes | Yes | No | No | No | Yes | Yes |
NLSP Multicast Support | Yes | Yes | Yes | Yes | Yes | No | No | Yes | Yes | Yes |
| Management |
|
|
|
|
|
|
|
|
|
|
Cisco Call History MIB Command Line Interface | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
Cisco IOS Internationalization | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Entity MIB, Phase 1 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
SNMPv2C | Yes | Yes | Yes | Yes | Yes | Yes | No | No | Yes | Yes |
SNMP Inform Requests | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
Virtual Profiles | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
VPDN MIB and Syslog Facility | Yes | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes |
| Multimedia |
|
|
|
|
|
|
|
|
|
|
IP Multicast Load Splitting across Equal-Cost Paths | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
IP Multicast over ATM Point-to-Multipoint Virtual Connections | No | No | No | No | No | No | No | No | No | No |
IP Multicast over Token Ring LANs | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
PIM Version 2 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Stub IP Multicast Routing | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Quality of Service |
|
|
|
|
|
|
|
|
|
|
RTP Header Compression | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Security |
|
|
|
|
|
|
|
|
|
|
Additional Vendor-Proprietary RADIUS Attributes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Automated Double Authentication | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
Certificate Authority Interoperability | Yes | No | No | No | Yes | No | No | No | No | Yes |
Cisco IOS Firewall: Context-Based Access Control | No | No | No | No | No | No | Yes | Yes | Yes | Yes |
Double Authentication | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Encrypted Kerberized Telnet | Yes | No | No | Yes | No | No | No | No | Yes | Yes |
HTTP Security | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Internet Key Exchange Security Protocol | Yes | No | Yes | Yes | Yes | No | No | No | Yes | Yes |
IPSec Network Security | Yes | No | Yes | Yes | Yes | No | No | No | Yes | Yes |
MS-CHAP Support | Yes | Yes | Yes | Yes | Yes | No | No | No | Yes | Yes |
Named Method Lists for AAA Authentication & Accounting | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Per-User Configuration | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Reflexive Access Lists | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
TCP Intercept | Yes | Yes | Yes | Yes | Yes | No | No | No | Yes | Yes |
Vendor-Proprietary RADIUS Attributes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Switching |
|
|
|
|
|
|
|
|
|
|
AppleTalk Routing over ISL and IEEE 802.10 in Virtual LANs | No | No | No | No | No | No | No | No | No | No |
CLNS and DECnet Fast Switching over PPP | Yes | Yes | Yes | Yes | Yes | No | No | No | Yes | Yes |
DECnet/Vines/XNS over ISL, includes:
| Yes | Yes | Yes | Yes | No | Yes | No | No | Yes | Yes |
Fast-Switched Policy Routing | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
IPX Routing over ISL | No | No | No | No | No | No | No | No | No | No |
VIP Distributed Switching Support for IP Encapsulated in ISL | No | No | No | No | No | No | No | No | No | No |
| Terminal Services |
|
|
|
|
|
|
|
|
|
|
Virtual Templates for Protocol Translation | Yes | Yes | Yes | Yes | Yes | Yes | No | No | Yes | Yes |
| WAN Optimization |
|
|
|
|
|
|
|
|
|
|
ATM MIB Enhancements | No | No | No | No | No | No | No | No | No | No |
PAD Enhancements | Yes | Yes | Yes | Yes | Yes | Yes | No | No | Yes | Yes |
PAD Subaddressing | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| WAN Services |
|
|
|
|
|
|
|
|
|
|
Always On/Dynamic ISDN (AO/DI) | Yes | Yes | Yes | Yes | Yes | No | No | No | Yes | Yes |
Bandwidth Allocation Control Protocol | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
Dialer Watch | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Enhanced Local Management Interface (ELMI) | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Frame Relay Enhancements | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Frame Relay MIB Extensions | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Frame Relay Router ForeSight | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
ISDN Advice of Charge | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
ISDN Caller ID Callback | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
ISDN NFAS | No | Yes | Yes | Yes | Yes | No | No | No | No | No |
Layer 2 Forwarding—Fast Switching | Yes | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes |
Leased Line ISDN at 128 kbps | No | No | No | No | No | No | No | No | No | No |
Microsoft Point-to-Point Compression | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
MS Callback | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Multiple ISDN Switch Types | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
National ISDN Switch Types for Basic Rate and Primary Rate Interfaces | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
PPP over ATM | No | No | No | No | No | No | No | No | No | No |
Telnet Extensions for Dialout | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
X.25 Enhancements | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
X.25 on ISDN | Yes | Yes | Yes | Yes | Yes | No | Yes | Yes | Yes | Yes |
X.25 Switching between PVCs and SVCs | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
X.28 Emulation | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| 1This image is not available in Releases 11.3(1)T and 11.3(2)T. It is available in Release 11.3(3)T and later 11.3 T releases. 2This image is available in Release 11.3(3)T and later releases. |
The RSL has an upgrade utility to permanently modify a CiscoPro router so that it accepts Cisco IOS Release 11.2 software images. The utility changes the router SysObjectID Simple Network Management Protocol (SNMP) MIB value (used for network management) to that of a Cisco router. The software banner also changes and no longer identifies the router as a CiscoPro product.
The upgrade utility must be located in the Images directory. If it is not, the upgrade utility informs you that the image is not present. The Cisco 2500 series upgrade utility filename is cpa25-upgrade-l.112-3.P.
This section describes some solutions to problems you might encounter when using the RSL. These solutions are additions to RSL online help.
Try increasing the Short Timeout value in the Options dialog box if you receive the following message when trying to connect to the router:
"Failed to configure the router to enable the Cisco IOS software image and configuration
file upload and download operations. You may want to check the router to make sure that
the selected interface exists."
This connection recovery method is particularly applicable when you are connecting to one of the following devices:
In some cases, the RSL is unable to restore the startup configuration. If this happens, take the following steps:
Step 1 Ensure that all cables are properly attached to both the router and the PC.
Step 2 Restart the RSL, and connect by using the Preconfigured router option.
Step 3 When asked if you want to overwrite the existing startup configuration file, choose no.
Step 4 When asked if you want to continue, choose yes.
Step 5 When the router is connected, select Download Router Configuration in the Router Software Loader dialog box.
Step 6 Select the appropriate file, and click the radio button beside Copy configuration to the router nonvolatile memory.
The router should now contain the startup configuration it had before the initial RSL connection. You can now exit the RSL.
The following information about RSL operations can help you with the installation process:
Use this TFTP server application method as an alternative to using the RSL to install the router software from the CD-ROM. You can perform this procedure using a PC (running Microsoft Windows 95 or Microsoft Windows 3.1), a Macintosh, or a UNIX system. You can use either the copy tftp flash or copy rcp flash command to download the router software to the router.
First obtain a TFTP application or a remote copy protocol (rcp) application to set up your computer as a TFTP server or an rcp server. Use the RSL or the TFTP server included on the feature pack CD-ROM to install the router software only if you are using a PC running Windows 95. For other operating systems, a number of TFTP or rcp applications are available from independent software vendors or available as shareware from public sources on the World Wide Web.
Step 1 Install any TFTP server application on the PC. (A PC application is included on the feature pack CD-ROM for Microsoft Windows 95 only.)
Step 2 Launch the TFTP server application on the PC, usually by double-clicking the application icon or its .exe filename.
Step 3 Set up the PC as a TFTP server by using the TFTP server application setup or configuration facility.
Most TFTP server applications include a setup facility that allows you to specify the PC as a server. For example, from the TFTP menu of one application, you can select Settings to display a panel that includes a checkbox beside the word Server. To configure the local PC as a server, select this check box.
The TFTP server also allows the selection of a "root" directory. You must select the directory in which the Cisco IOS files reside, for example, d:\cpswinst\images.
| Caution Make sure you set up your local PC as a TFTP server. If you overlook this step, you cannot perform the copy procedure. This reminder also applies if you are using rcp instead of TFTP. |
Step 4 Establish a console session from your local PC (which is now configured as a TFTP server) to the Cisco router by using one of these methods:
| Caution Make sure your PC is set up to communicate with the 10BaseT Ethernet port on the router. |
Step 5 Connect your PC Ethernet port to the corresponding router LAN port. Use the 10BaseT crossover cable to connect to an Ethernet port. Use straight-through cables if you are connecting via a 10BaseT hub or a 100BaseT hub.
Step 6 Enter the following commands to set the configuration register to 0x2101 and reload to the bootstrap image:
Router# config terminal
Router(config)# config-reg 0x2101
Router(config)# end
Router# reload
Step 7 Enter yes in response to the prompt asking if the system configuration has been modified:
# System configuration has been modified. Save? yes
Step 8 If the password prompt appears, enter the password.
Password: <password>
Step 9 At the router prompt, enter enable and then the password:
Router(boot)> enable
Password: <password>
Step 10 If you are not upgrading a CiscoPro CPA2500 router, go to Step 19.
Step 11 At the router prompt, enter the following command to copy the router upgrade utility from the PC CD-ROM drive to the router:
Router(boot)# copy tftp flash
Step 12 When prompted, enter the IP address of your PC, as in the following example:
Address or name of remote host [255.255.255.255]? 131.108.1.1
This is the IP address of your local PC, not the router. (Note that you can obtain your PC IP address from the DOS prompt in the windows directory by entering winipcfg, as follows: C:\WINDOWS> winipcfg.)
Step 13 When prompted, enter the filename of the image to be copied to the router as in the following example:
Source file name? cpa2500-upgrade-l.112-3.P
Step 14 In response to the following prompt, enter the destination filename, and press Enter.
Destination file name [cpa2500-upgrade-l.112-3.P]? cpa2500-upgrade-l.112-3.P
(This is the name of the image file on the router, not the full pathname of the image on the PC CD-ROM.)
During the transfer process, messages indicate that the software has accessed the file you have specified and is loading it.
If the file is not found, check the following:
If the file is still not found, create a temporary directory called C:\temp and copy the CiscoPro upgrade file into the directory. Select the C:\temp directory as the root directory.
Step 15 Enter yes in response to the prompt asking if you want to erase the existing image in the router Flash memory before copying the new one:
Erase flash device before writing? [confirm] yes
The entire copying process takes several minutes and differs from network to network. The exclamation point (!) indicates that the copy process is taking place. Each exclamation point indicates that ten packets have been transferred successfully. If you see three or more periods (...), the transfer might fail. If the transfer fails, use the ping command to check IP connectivity between the router and TFTP server.
Step 16 Enter the reload command to reload the router:
Router(boot)# reload
Do not save the configuration.
After reload is complete, your CiscoPro router has been upgraded to a Cisco Enterprise router. Because the original Cisco IOS image that resided in Flash memory was erased during the upgrade process, the router is now running in bootstrap mode.
Step 17 If the password prompt appears, enter the password.
Password: <password>
Step 18 At the router prompt, enter enable and then the password:
Router(boot)# enable
Password: <password>
Step 19 At the router prompt, enter the following command to copy the new software image from the PC CD-ROM drive to the router:
Router(boot)(config)# copy tftp flash
In the next series of steps, you download the Cisco IOS Release 11.2 images that you want installed on your router.
Step 20 When prompted, enter the IP address of your PC, as in the following example:
Address or name of remote host [255.255.255.255]? 131.108.1.1
This is the IP address of your local PC, not that of the router.
Step 21 When prompted, enter the filename of the Cisco IOS Release 11.2 image to be copied to the router, as in the following example:
Source file name? 80031718.bin
This example specifies the DOS image name of the IP feature set for Cisco 2500 series routers (as shown in Table 2 in the section, "Cisco IOS Release 11.3(3)T Feature Sets").
Step 22 In response to the prompt, enter the destination UNIX image filename, and press Enter.
This is the name of the image file on the router, not the full pathname of the image on the CD-ROM attached to the PC. Refer to Table 2 in the section, "Cisco IOS Release 11.3(3)T Feature Sets" for the UNIX image filename.
Destination file name [80031718.bin]? c2500-i-l
During the transfer process, the software displays messages indicating that it has accessed the file you have specified and is loading it.
Step 23 Enter yes in response to the prompt asking if you want to erase the existing image copy resident in the router Flash memory before copying the new one.
Erase flash device before writing? [confirm] yes
The entire copying process takes several minutes and differs from network to network.
The exclamation point (!) indicates that the copy process is taking place. Each exclamation point (!) indicates that ten packets have been transferred successfully. A checksum verification of the image occurs after the image is written to Flash memory.
Step 24 Enter the following commands to reset the configuration register to 0x2102.
Router(boot)(config)# config terminal
Router(boot)(config)# config-reg 0x2102
Router(boot)(config)# end
Step 25 Enter the reload command to reload the router:
Router# reload
Caution If you upgraded a CiscoPro CPA2500 router, do not save the configuration when prompted.
After reload is complete, the router should be running the required Cisco IOS image. Use the show version command to verify.
All documents mentioned in this section are available in printed or electronic format. (See the section "Online Navigation" for more information on accessing electronic documentation.)
The following sections describe the documentation related to these release notes:
The following documents are specific to the Cisco 2500 series routers:
The following documents apply to the Cisco 2500 series routers:
The Cisco IOS configuration guides, command references, and chapter topics are as follows:
| Books | Chapter Topics |
|---|---|
♦ Configuration Fundamentals Configuration Guide ♦ Configuration Fundamentals Command Reference | Configuration Fundamentals Overview Cisco IOS User Interfaces File Management Interface Configuration System Management |
♦ Network Protocols Configuration Guide, Part 1 ♦ Network Protocols Command Reference, Part 1 | IP Addressing IP Services IP Routing Protocols |
♦ Network Protocols Configuration Guide, Part 2 ♦ Network Protocols Command Reference, Part 2 | AppleTalk Novell IPX |
♦ Network Protocols Configuration Guide, Part 3 ♦ Network Protocols Command Reference, Part 3 | Apollo Domain Banyan VINES DECnet ISO CLNS XNS |
♦ Wide-Area Networking Configuration Guide ♦ Wide-Area Networking Command Reference | ATM Frame Relay SMDS X.25 and LAPB |
♦ Security Configuration Guide ♦ Security Command Reference | AAA Security Services Security Server Protocols Traffic Filtering Network Data Encryption Passwords and Privileges Neighbor Router Authentication IP Security Options |
♦ Dial Solutions Configuration Guide ♦ Dial Solutions Command Reference | Dial Business Solutions and Examples Dial-In Port Setup DDR and Dial Backup Remote Node and Terminal Service Cost-Control and Large-Scale Dial Solutions VPDN |
♦ Cisco IOS Switching Services Configuration Guide ♦ Cisco IOS Switching Services Command Reference | Switching Paths for IP Networks ♦ Fast Switching ♦ Autonomous Switching ♦ NetFlow Switching ♦ Optimum Switching Virtual LAN (VLAN) Switching and Routing ♦ Inter-Switch Link Protocol Encapsulation ♦ IEEE 802.10 Encapsulation ♦ LAN Emulation |
♦ Bridging and IBM Networking Configuration Guide ♦ Bridging and IBM Networking Command Reference | Transparent Bridging Source-Route Bridging Remote Source-Route Bridging DLSw+ STUN and BSTUN LLC2 and SDLC IBM Network Media Translation DSPU and SNA Service Point SNA Frame Relay Access Support APPN NCIA Client/Server Topologies IBM Channel Attach |
♦ Cisco IOS Software Command Summary ♦ Dial Solutions Quick Configuration Guide ♦ System Error Messages ♦ Debug Command Reference |
|
The following URL contains links to access helpful tips on configuring your Cisco products:
http://www.cisco.com/kobayashi/serv_tips.shtml
This URL is subject to change without notice. If it changes, point your web browser to http://www.cisco.com/ , and follow this path: Software & Support, Technical Tips (button on left margin).
"Hot Tips" are popular tips and hints gathered from the Cisco Technical Assistance Center (TAC). Most of these documents are available from the TAC FAX-on-demand service. To access FAX-on-demand and receive documents at your FAX machine, from the USA, call 888-50-CISCO (888-502-4726). From other areas, call 415-596-4408.
The following sections are provided from the Technical Tips page:
The Cisco IOS software documentation set is available as printed manuals or electronic documents. You can access Cisco 2500 series-specific documentation and Cisco IOS software documentation at Cisco Connection Online (CCO) on the World Wide Web and on the Cisco Documentation CD-ROM:
For additional information about the Documentation CD-ROM and CCO, refer to the sections "Cisco Connection Online" and "Documentation CD-ROM" at the end of these release notes.
Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar, and select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more up to date than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com. 
Posted: Tue Dec 17 19:21:40 PST 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.