Table of Contents

Contents
Cisco Feature Packs and Memory Requirements

What Is a Feature Pack?
Cisco IOS Release 11.3(2)T Feature Pack Descriptions and Memory Requirements

Cisco IOS Feature Sets for the Cisco AS5200 Access Server

Feature Set Matrix
Feature Set Table

Modem Code Information
Installing Software Images Using RSL

Recovering from a Connection Error
Restoring the Startup Configuration
Helpful Hints

Installing Software Images Using a TFTP Server Application

Installation Process

Related Documentation

Cisco AS5200-Specific Documentation
Cisco IOS Documentation Set and Related Supporting Documents
Software Configuration Tips on the Cisco TAC Home Page

Online Navigation

Cisco AS5200-Specific Documentation
Cisco IOS Documentation Set and Related Supporting Documents

Cisco Connection Online
Documentation CD-ROM

Release Notes for Cisco IOS Release 11.3(2)T Software Feature Packs—Cisco AS5200 Access Servers

April 20, 1998

These release notes discuss the Cisco IOS Release 11.3(2)T feature packs for Cisco AS5200 access servers. These are the product numbers for the supported features packs:

• CD52-C-11.3= (Cisco AS5200 IP Feature Pack)
  
  
• CD52-CP-11.3= (Cisco AS5200 IP Plus Feature Pack)
  
  
• CD52-B-11.3= (Cisco AS5200 Desktop Feature Pack)
  
  
• CD52-BP-11.3= (Cisco AS5200 Desktop Plus Feature Pack)
  
  
• CD52-A-11.3= (Cisco AS5200 Enterprise Feature Pack)
  
  
• CD52-AP-11.3= (Cisco AS5200 Enterprise Plus Feature Pack)
  
  

Contents

These release notes discuss the following topics:

• Cisco Feature Packs and Memory Requirements
  
  
• Cisco IOS Feature Sets for the Cisco AS5200 Access Server
  
  
• Modem Code Information
  
  
• Installing Software Images Using RSL
  
  
• Installing Software Images Using a TFTP Server Application
  
  
• Related Documentation
  
  
• Online Navigation
  
  
• Cisco Connection Online
  
  
• Documentation CD-ROM
  
  

Cisco Feature Packs and Memory Requirements

This section explains the following:

• What Is a Feature Pack?
  
  
• Cisco IOS Release 11.3(2)T Feature Pack Descriptions and Memory Requirements
  
  

What Is a Feature Pack?

The heart of a Cisco IOS software feature pack is a CD-ROM that contains a software image and Router Software Loader (RSL), a Windows 95 application that loads the image onto the access server/router. Each Cisco IOS Release 11.3 feature pack CD-ROM contains one feature set. For users without Windows 95, images can also be loaded with a Trivial File Transfer Protocol (TFTP) server application, as explained in these release notes.

Each Cisco IOS Release 11.3 software feature pack box contains the following:

• CD-ROM with the following software:
  
  
• Feature set software image that includes bundled modem firmware
  
  
• RSL program (Windows 95 application)
  
  
• TFTP server application (Windows 95 application)
  
  
• Instruction booklet for using RSL
  
  
• Release notes (this document), which includes instructions for using a TFTP server application, on a system not running Windows 95 Software license, for using Cisco software in object code form on a single access server or router
  
  
• Cisco Documentation CD-ROM, which contains all Cisco IOS software documentation
  
  

Cisco IOS Release 11.3(2)T Feature Pack Descriptions and Memory Requirements

This section includes two tables:

• Table 1—Describes each feature pack image, including a brief description of each feature set, the images' UNIX and DOS filenames, and memory requirements.
  
  
• Table 2—Describes the factory default available memory and the possible memory upgrades for the Cisco AS5200 access server.
  
  

You can use Table 1 to identify the memory required for your configuration based on the image you run. You can then check this against Table 2 to determine how much memory is available on the access server as the factory default and the upgrades that you can obtain to satisfy your requirements.

Cisco IOS Feature Sets for the Cisco AS5200 Access Server

The Cisco IOS software is packaged into "feature sets" (also called "software images"). There are many different feature sets available, and each feature set contains a specific subset of Cisco IOS features. The feature set matrix is used to see the overall feature set organization.

Feature Set Matrix

The feature set matrix (see Table 3) shows the new feature set organization and lists which feature sets are available on the Cisco AS5200 for Cisco IOS Release 11.3(2)T. The matrix uses the following symbols:

Cisco IOS images with strong encryption (including but not limited to 56-bit DES) are subject to U.S. Government export controls, and have a limited distribution. Images to be installed outside the U.S. require an export license. Customer orders might be denied or subject to delay due to U.S. Government regulations. Contact your sales representative or distributor for more information, or send e-mail to export@cisco.com.

Feature Set Table

To determine what features are available with each feature set, see Table 4. The table summarizes what features you can use when running a specific feature set on the Cisco AS5200 access server for Cisco IOS Release 11.3(2)T. The feature set table uses the following symbols:

Modem Code Information

If you are running Microsoft Windows 95 on a PC, we recommend using the RSL to download modem code. For detailed steps, refer to the RSL online help topic "Downloading Modem Files." If you are running Windows NT, UNIX, or Macintosh, use a TFTP or RCP to download modem code. TFTP server instructions are in the document titled "Another Way to Download Modem Code."

Both RSL and TFTP instructions for downloading modem code are available at the follow URL:
http://www.cisco.com/public/sw-center/sw-access.shtml
Click on the link "Cisco Channel Modem Software Upgrade."

For complete information about firmware download, refer to "Installing 56K 12-Port Modules in Cisco AS5200 Universal Access Servers," which is available at http://www.cisco.com. The section "Decisions about Downloading 56K Modem Code" contains background information, and the section "Downloading Modem Code for Releases Requiring a Single File" contains download procedures for Cisco IOS Release 11.3(2)T.

See the sections "Cisco Connection Online" and "Documentation CD-ROM" for information on accessing customer documentation.

Installing Software Images Using RSL

The Router Software Loader application contained on the feature pack CD-ROM is designed to work with a PC running Microsoft Windows 95. Refer to the booklet included with the CD-ROM for instructions to install the software images.

This section describes several solutions to problems you might encounter when using RSL. These solutions are additions to the RSL online help.

Recovering from a Connection Error

This installation tip provides a possible recovery solution in the event that you are unable to connect to your access server or router. You can skip this section unless you are experiencing a connection error.

In some cases, you might receive the following error message while connecting to the target access server:

If you encounter this message, try increasing the Short Timeout value, which is set to 25 seconds, in the Options dialog box, especially if one of the following situations applies:

• You are connecting to an access server that has a large configuration file.
  
  
• You are connecting to a Cisco AS5200 access server. A Cisco AS5200 requires up to 45 seconds to write a configuration to nonvolatile random-access memory (NVRAM), due to the amount of interfaces that must be checked during this process. Increase the Short Timeout value to 60 seconds.
  
  

Restoring the Startup Configuration

In some cases, RSL is unable to restore the startup configuration. If this happens, take the following steps:

Step 1   Ensure that all cables are properly attached to both the access server and the PC.

Step 2   Restart RSL and connect using the Preconfigured router option.

Step 3   When asked if you want to overwrite the existing startup configuration file, choose NO.

Step 4   When asked if you want to continue, choose YES.

Step 5   When connected, select Download Router Configuration in the Router Software Loader dialog box.

Step 6   Select the appropriate file, and click Copy configuration to the router's nonvolatile memory.

The access server should now contain the startup configuration it had before the initial RSL connection. You can now exit RSL.

Helpful Hints

The following information about RSL operations can help you with the installation process:

• If you have added any static entries to the PC's Address Resolution Protocol (ARP) table, one of them might be deleted by RSL. This entry will need to be manually reentered into the PC's ARP table.
  
  
• If the access server's running configuration at connection time is not the same as the access server's startup configuration, the exact configuration will not be restored. Any changes that you have made since the last time a copy running-config startup-config or write memory command was entered will be lost.
  
  
• RSL will restore the access server's running configuration, but some configuration commands will not be restored. However, the startup configuration will be correct. You can restore the exact running configuration by rebooting the access server. Commands not restored to the running configuration include the following interface configuration commands: no shutdown, no ringspeed, and media-type aui.
  
  

Installing Software Images Using a TFTP Server Application

The Router Software Loader application contained on the feature pack CD-ROM is designed to work with a PC running Microsoft Windows 95. The booklet included with the CD-ROM explains how to perform this simple and recommended install process. However, an alternative is available using a TFTP server application to install router software.

This section explains how to use a TFTP server application as an alternative to using the RSL to install the router software from the CD-ROM. You can perform this procedure using a PC (running Microsoft Windows 95 or Microsoft Windows 3.1), a Macintosh, or a UNIX system. You can use either the copy tftp flash or copy rcp flash command to download the software to the access server.

First obtain a TFTP application or a remote copy protocol (RCP) application to set up your computer as a TFTP server or an RCP server. You can use the RSL or the TFTP server included on the feature pack CD-ROM to install the software only if you are using a PC running Windows 95. For other operating systems, a number of TFTP or RCP applications are available from independent software vendors or as shareware from public sources on the World Wide Web.

Installation Process

This section describes how to use TFTP on a PC to install the access server software.

Step 1   Install any TFTP server application on the PC. (The PC application included on the feature pack CD-ROM is for Microsoft Windows 95 only.)

Step 2   Launch the TFTP server application on the PC, usually by double-clicking the application icon or its .exe filename.

Step 3   Set up the PC as a TFTP server by using the TFTP server application setup or configuration facility.

Most TFTP server applications include a setup facility that allows you to specify the PC as a server. For example, from the TFTP menu of one application, you can select Settings to display a panel that includes a check box beside the word Server. To configure the local PC as a server, click this check box.

The TFTP server also allows the selection of a "root" directory. You must select the directory in which the Cisco IOS files reside, for example, d:\cpswinst\images.

Caution Make sure you set up your local PC as a TFTP server. If you overlook this step, you cannot perform the copy procedure. This reminder also applies if you are using RCP instead of TFTP.

Step 4   Establish a console session from your local PC (which is now configured as a TFTP server) to the access server by using one of these methods:

• Connect the PC com port to the access server console port.
  
  

  This is the recommended method.When you reload the access server with the new image in Step 13, you remain connected to the access server. (If you use Telnet, you lose connection to the access server.)

• Establish a Telnet session from the PC to the access server.
  
  

Step 5   Connect your PC Ethernet port to the access server Ethernet port. Use an Ethernet crossover cable.

---

Note Use straight-through cables if you are connecting via a 10BaseT hub or a 100BaseT hub.

---

For systems without a LAN interface, make sure that the access server and the PC have IP connectivity through the available interface (that is, the access server and PC can ping each other with IP traffic).

---

Note We recommend that you back up the access server configuration before upgrading the access server software.

---

Step 6   Enter the following commands to enter privileged mode, change the config-reg to 0x2101, and reload:

The access server will reload in bootstrap mode, which is necessary for copying images into Flash memory.

Step 7   Enter the following commands to enter enable mode and copy the new software image from the PC (set up as a TFTP server) to the access server:

(boot)# copy tftp flash

In the next series of steps, you download the Cisco IOS Release 11.3 images that you want installed on your access server.

Step 8   When prompted, enter the IP address of your PC, as in the following example:

Address or name of remote host [255.255.255.255]? 172.16.1.1

This is the IP address of your local PC, not that of the access server.

Step 9   When prompted, enter the filename of the Cisco IOS Release 11.3 image to be copied to the access server, as in the following example:

Source file name? 80257302.bin

This example specifies the DOS image name of the IP feature set for a Cisco AS5200 access server, as listed in Table 1.

Step 10   In response to the prompt, enter the destination UNIX image filename, and press Enter.

This is the name of the image file on the access server, not the full path name of the image on the CD-ROM attached to the PC. Refer to Table 1 in the section, "Cisco Feature Packs and Memory Requirements" for the UNIX image filename.

Step 11   Enter yes in response to the prompt asking if you want to erase the existing image copy resident in the access server Flash memory before copying the new one:

Erase flash device before writing? [confirm] yes

The entire copying process takes several minutes and differs from network to network.

During the transfer process, the software displays messages indicating that it has accessed the file you have specified and is loading it.

The exclamation point (!) indicates that the copy process is taking place. Each exclamation point (!) indicates that ten packets have been transferred successfully. A checksum verification of the image occurs after the image is written to Flash memory.

Step 12   Enter the following commands to change the config-reg back to 0x2102. This will force the access server to reload to the image running from Flash memory.

Step 13   Enter the reload command to reload the access server:

After reload is complete, the access server should be running the desired Cisco IOS image. Use the show version command to verify.

Related Documentation

All documents mentioned in this section are available as printed manuals or electronic documents. (See the section "Online Navigation" for more information on accessing electronic documentation.)

The following documentation is related to these release notes:

• Cisco AS5200-Specific Documentation
  
  
• Cisco IOS Documentation Set and Related Supporting Documents
  
  
• Software Configuration Tips on the Cisco TAC Home Page
  
  

Cisco AS5200-Specific Documentation

The following documents are specific to the Cisco AS5200 access server:

• Cisco AS5200 Software Configuration Guide
  
  
• Cisco AS5200 Manager Guide
  
  
• Regulatory Compliance and Safety Information
  
  

Cisco IOS Documentation Set and Related Supporting Documents

The following documents apply to the Cisco AS5200 access server:

• Release Notes for Cisco IOS Release 11.3
  
  
• Product-Specific Release Notes
  
  
• Feature Guide for Cisco IOS Release 11.3 T
  
  
• Cisco IOS Release 11.3 T New Feature Documentation
  
  
• Cisco IOS Release 11.3 Configuration Guides/Command References
  
  
• Cisco IOS Software Command Summary
  
  
• System Error Messages
  
  
• Cisco Management Information Base (MIB) User Quick Reference
  
  
• Debug Command Reference
  
  
• Access Services Quick Configuration Guide
  
  
• Cisco IOS Software Release 11.3 and 11.3 T Caveats
  
  

For details about the features introduced in these release notes, refer to the Feature Guide for
Cisco IOS Release 11.3 T.

The Cisco IOS configuration guides, command references, and chapter topics are as follows:

Software Configuration Tips on the Cisco TAC Home Page

The following URL contains links to access helpful tips to configure your Cisco products:

http://www.cisco.com/kobayashi/serv_tips.shtml

This URL is subject to change without notice. If it does change, point your web browser to http://www.cisco.com/ and follow this path: Software & Support, Technical Tips (button on left margin).

"Hot Tips" are popular tips and hints gathered from Cisco's Technical Assistance Center (TAC). Most of these documents are also available from the TAC's Fax-on-Demand service. To access Fax-on-Demand and receive documents at your fax machine, call 888-50-CISCO (888-502-4726). From international areas, call 415-596-4408.

The following sections are provided from the Technical Tips page:

• Field Notices—Designed to provide notification of critical issues regarding Cisco products. These include problem descriptions, safety or security issues, and hardware defects.
  
  
• Hardware—Technical Tips related to specific hardware platforms.
  
  
• Internetworking Features—Tips on using and deploying Cisco IOS software features and services.
  
  
• Sample Configurations—Actual configuration examples complete with topology and annotations.
  
  
• Software Products—MultiNet & Cisco Suite 100, Network Management, Cisco IOS Software Bulletins, CiscoPro Configurations.
  
  
• Special Collections—Other Helpful Documents. Frequently Asked Questions, Security Advisories, References & RFCs, Case Studies, CiscoPro Documentation CD-ROM.
  
  

Online Navigation

You can access Cisco IOS software documentation, such as printed manuals and configuration notes, either at Cisco Connection Online (CCO) on the World Wide Web or on the Cisco Documentation CD-ROM.

Cisco AS5200-Specific Documentation

• Using a web browser, follow this path on CCO:
  
  

  Software & Support, Cisco Documentation, Access Servers and Access Routers, Access Servers, Cisco AS5200, Cisco IOS Software, Release Notes for Cisco AS5200 for Cisco IOS Release 11.3(2)T.

• On the Documentation CD-ROM, follow this path:
  
  

  Cisco Product Documentation, Access Servers and Access Routers, Access Servers, Cisco AS5200, Cisco IOS Software, Release Notes for Cisco AS5200 for Cisco IOS Release 11.3(2)T.

Cisco IOS Documentation Set and Related Supporting Documents

• Using a web browser, follow this path on CCO:
  
  

  Software & Support, scroll down and select Cisco Documentation. Next, click on Cisco IOS Software Configuration, and then click on Cisco IOS Release 11.3.

• On the Documentation CD-ROM, follow this path:
  
  

  Cisco Product Documentation, select Cisco IOS Software Configuration, and then select Cisco IOS Release 11.3.

Additional information about CCO and the Documentation CD-ROM is in the sections "Cisco Connection Online" and "Documentation CD-ROM" at the end of these release notes.

Cisco Connection Online

Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.

Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to the Cisco customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.

CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.

You can access CCO in the following ways:

• WWW:  http://www.cisco.com
  
  
• WWW:  http://www-europe.cisco.com
  
  
• WWW:  http://www-china.cisco.com
  
  
• Telnet:  cco.cisco.com
  
  
• Modem:  From North America, 408 526-8070; from Europe, 33 1 64 46 40 82. Use the following terminal settings: VT100 emulation; databits: 8; parity: none; stop bits: 1; and connection rates up to 28.8 kbps.
  
  

For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.

Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more up to date than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM is available as a single unit or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

Posted: Tue Dec 17 19:20:08 PST 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.