ISDN Caller ID Callback Commands

This chapter describes the function and displays the syntax for ISDN caller ID callback commands. For more information about defaults and usage guidelines, see the corresponding chapter of the Dial Solutions Command Reference.

dialer caller

To configure caller ID screening and optionally to enable ISDN caller ID callback for legacy DDR or the dialer profiles DDR feature, use the dialer caller interface configuration command. To disable this feature, use the no form of this command.

dialer caller number [callback]
no dialer caller number [callback]

number	Remote telephone number for which to screen. Use a letter X to represent a single "don't care" digit. The maximum length of each number is 25 characters.
callback	(Optional) Enables callback.

isdn caller

To configure ISDN caller ID screening and optionally to enable ISDN caller ID callback for legacy DDR, use the isdn caller interface configuration command. To disable this feature, use the no form of this command.

isdn caller phone-number [callback]
no isdn caller phone-number [callback]

phone-number	Remote telephone number for which to screen. Use a letter X to represent a single "don't care" digit. The maximum length of each number is 25 characters.
callback	(Optional) Enables callback.