cc/td/doc/product/software/ios100
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Cisco 7000 Series Processors

Cisco 7000 Series Processors

Cisco 7000 series processors provide new functionality and have different names than the interface cards used in other Cisco routers.

Table E-1 provides general conversion information. For example, the RP card on the Cisco 7000 provides the same general area of functionality as the CSC-MC+ and CSC-ENVM cards on other Cisco routers. Note, however, that some new boards for the 7000 series, such as the AIP and the MIP, provide functionality for which there were no earlier equivalents.


Interface Processor Conversion Table
Modular Products Card Cisco 7000 Series Processors Cisco 7000 Series Processor Options
CSC/4 RP (Route Processor)
CSC-ENVM RP (Route Processor)
CSC-MC+ RP (Route Processor)
CSC-CCTL2 SP (Switch Processor)
SSP (Silicon Switch Processor), which includes the
SSE (Silicon Switch Engine)

CSC-C2MEC EIP (Ethernet Interface Processor)
CX-EIP2
CX-EIP4
CX-EIP6

2 ports
4 ports
6 ports
CSC-C2CTR TRIP (Token Ring Interface Processor)
CX-TRIP4

4 ports
CSC-C2FCI(T) FIP (FDDI Interface Processor)
CX-FIP-MM
CX-FIP-SS
CX-FIP-MS
CX-FIP-SM

Multimode-to-multimode
Single mode-to-single mode
Multimode-to-single mode
Single mode-to-multimode
CSC-SCI FSIP (Fast Serial Interface Processor) 4 or 8 ports available for RS-232,
RS-449, RS-530, V.35, and X.21
CSC-HSCI HIP (HSSI Interface Processor)

hometocprevnextglossaryfeedbacksearchhelp
Copyright 1989-1997 © Cisco Systems Inc.