General Reference

This appendix contains information for the MVS, VM, or VSE programmers. It contains the following sections:

Programmer Reference for NetView Version

This section contains the following topics:

This section provides a listing of CLISTs available with the Native Service Point software for NetView.

Table B-1 provides a description of CLISTS in Native Service Point.

Table B-1: CLIST Descriptions for NetView

CLIST Name	Description
RTRCMD	Cisco/NetView router CLIST
RTRRCMD	Cisco/NetView remote router CLIST
RTROPER	Cisco/NetView operator reset CLIST
RTRMGR	Router status display CLIST
RTRSINIT	Router Manager initialization CLIST
RTR590E	Status automation CLIST

This section provides a listing common GLOBALs available with the Native Service Point software for NetView.

Table B-1 provides a description of the common GLOBALs in Native Service Point.

Table B-2: Common GLOBALs for NetView

Common Global Name	Description
&RTRINITS	Date and time RTRSINIT was last executed.
&RTRNUM	Number of routers being monitored.
&node	Router Service Point Name.
&RTR&node = &n =	Index number assigned to the router.
&RTR&n	Name of router (&node).
&RTR&n	Name of domain that owns the router &node.
&RTH&n	Host name defined in the router configuration &node.
&RTS&n	Status of router &node.
&RTO&n	Name of operator monitoring router &node.

This section provides a listing of operator task GLOBALs available with the Native Service Point software for NetView.

Table B-1 provides a description of the common GLOBALs in Native Service Point.

Table B-3: Operator Task GLOBALs for NetView

Operator Task GLOBALs	Description
RTRSPN	Router being interrogated by operator.
&RTRHNAME	Host name for router &RTRSPN.
&RTRDM	Domain that owns the router &RTRSPN.
&RCMD	Last command sent to router &RTRSPN.
&RTRINDEX	Number of commands saved for retrieve.
&c =	Saved command.
&RTRRCMD&c	=&RTRSPN &RTRHNAME &RTRDM &RCMD
&DEBUG	Saved value of RTRCMD DEBUG operand.
&CTRACE	Saved value(s) of RTRRESET CTRACE operand(s).

This section contains the following topics:

This section provides a listing of NCLs available with the Native Service Point for NetMaster.

Table B-4 shows the NCL descriptions for NetMaster version.

Table B-4: NCL Descriptions for NetMaster

CLIST Names	Description
RTRCMD	Cisco/NetMaster router.
RTRHELP	Cisco/NetMaster help panel
RTRMGR	Router status display NCL.
RTROPER	Cisco/NetMaster operator reset NCL.
RTRRESET	Cisco/NetMaster messsage retrieval reset.
RTRSINIT	Router Manager initialization NCL.
RTR590E	Status automation NCL.

Table B-5 shows the job descriptions for NetMaster version.

Table B-5: Job Descriptions for NetMaster

Jobs	Description
PNALLOC	Cisco/NetMaster NCL
PNLRESTR	Cisco/NetMaster NCL
RTRMSGPR	MSGPROC for sample automation job.

This section provides a listing of common variables available with Native Service Point for NetMaster.

Table B-6 shows the common variables for NetMaster version.

Table B-6: Common Variables for NetMaster

Common Variables	Description
&000RTRSINIT	Date and time the rtrsinit command was last executed.
&000RTRNUM	Number of routers being monitored.
&node	Router Service Point Name.
&000&node = &n =	Index number assigned to router &node.
&000RTR&n	Name of router (&node).
&000RTD&n	Name of domain that owns router &node.
&000RTH&n	Host name defined in router &node configuration.
&000RTS&n	Status of router &node.
&000RTO&n	Name of operator monitoring router &node.
&000RTO&n	Saved value of rtrcmd debug operand.

This section provides a listing of operator variables available with Native Service Point for NetMaster.

Table B-7 shows the operator variables for NetMaster version.

Table B-7: Operator Variables for NetMaster

Operator Variables	Description
&RTRSPN	Router being interrogated by operator.
&RTRHNAME	Host name for router.
&RTRDM	Domain that owns the router.
&RCMD	Last command sent to the router.
&RTRINDEX	Number of commands saved for retrieval.
&c	Index for saved command.
&RTRRCMD&c	Saved command
&RTRRCMD&c	&RTRSPN &RTRHNAME &RTRDM &RCMD