Table Of Contents

Stopping the Telnet Service

Stopping the Telnet Service

---

If the Windows native Telnet service is running, you must stop the service before enabling NCM and LMS co-residency. To stop the Telnet service do the following:

---

Step 1 Navigate Start > Settings > Control Panel > Administrative Tools > Services to access the Services window.

Step 2 Right-click Telnet and select Properties.

Step 3 Set the Startup Type to Disabled as show in Figure B-1

Figure B-1 Disabling the Telnet Service Window

Step 4 Click the Stop button.

Step 5 Click the OK button.

---

Posted: Tue Nov 14 13:39:07 PST 2006
All contents are Copyright © 1992--2006 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.