cc/td/doc/product/rtrmgmt/cwncm
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table Of Contents

Stopping MKS Services

Stopping the MKS Telnetd Service

Stopping the MKS Secure Shell Service


Stopping MKS Services


If the MKS Toolkit is installed on your system, you must stop the MKS Toolkit's Telnetd service and MKS Secure Shell service before enabling NCM and LMS co-residency. This appendix describes these procedures.

Stopping the MKS Telnetd Service

To stop the MKS Telnetd service do the following:


Step 1 Navigate Start > Settings > Control Panel > Administrative Tools > Services to access the Services window.

Step 2 Right-click MKS Telnetd and select Properties.

Step 3 Set the Startup Type to Disabled as show in Figure A-1

Figure A-1 Disabling the MKS Telnetd Service Window

Step 4 Click the Stop button.

Step 5 Click the OK button.


Stopping the MKS Secure Shell Service

To stop the MKS Secure Shell (ssh) service do the following:


Step 1 Navigate Start > Settings > Control Panel > Administrative Tools > Services to access the Services window.

Step 2 Right-click MKS Secure Shell Service and select Properties.

Step 3 Set the Startup Type to Disabled as show in Figure A-2

Figure A-2 Disabling the MKS Secure Shell Service Window

Step 4 Click the Stop button.

Step 5 Click the OK button.



hometocprevnextglossaryfeedbacksearchhelp

Posted: Tue Nov 14 13:39:15 PST 2006
All contents are Copyright © 1992--2006 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.