This section contains a list of networking tasks that you must complete before you install URT, and the configuration tasks required after installation. For detailed information on configuring URT, see User Guide for the Cisco Secure User Registration Tool.
Networking Tasks Required Before Installation
Configure switches for VLAN and VTP domains
Start enabling dynamic port assignments (this can also be done after URT is configured)
Verify switch code version (refer to the system requirements for supported switches)
Make sure DHCP is running
Add domain controllers (refer to the system requirements for supported domain controllers)
Install VPS appliances
Add necessary Layer 3 connectivity requirements
Configuration Tasks Required After Installation
Add switch, VTP, and VLAN information
Configure switches for VPS ownership and web downloads
Configure VLAN subnets
Assign logon VLAN
Add domain controls (traditional and LDAP)
Add RADIUS server
Configure RADIUS server to point to the VPS as the Network Access Server
Enable reporting on RADIUS server
Customize options for domain controllers
Add MAC devices
Configure URT logon script options (for web logon and traditional logon clients)
Install script on the Authentication Server
Add MAC-to-VLAN assignments
Add users and groups to VLAN assignments
Configure web logon options (home page customizing options)
