|
As part of the upgrade, you must complete some reconfiguration tasks to activate URT Release 2.5 in the network.
Step 2 Insert the URT 2.5 Administrative Server CD in the Windows system.
Step 3 Select Start>Run and enter:
Replace d: with the drive letter for your CD-ROM.
Step 4 Click OK.
The installation program starts.
Step 5 In the uninstallation dialog box, select Yes to uninstall.
Step 6 In the confirmation dialog box, select Yes. The uninstallation program begins.
Step 7 When uninstallation is completed, a dialog box opens; click OK. The installation program begins.
Step 8 In the Welcome screen, click Next to continue.
Step 9 In the User Information text box, enter the user's name and the company name.
Step 10 The installation program displays the destination location. Click Next to continue.
Step 11 In the URT VPS Port Number dialog box, click Next.
Note Do not change the port number that the URT VLAN Policy Server uses to connect to the URT Administrative Server. This setting is preconfigured on the server. |
Step 12 In the Create URT Administrative Services text box, enter the user ID and password for the system (the user ID must have administrator privileges on the system).
The installation program begins copying files to your system.
Step 13 To complete the installation, select Yes to reboot your system.
After you restart the system, the URT Administrative Server begins to run on the system, the URT Administrative Client Interface is installed, and URT is added to the program list on the Start>Programs menu.
Note A single URT Administrative Server is recommended. If more than one URT Administrative Server is installed, URT will not coordinate logons among the servers. |
Before you add a VLAN Policy Server to URT Release 2.5, you must upgrade the VLAN Policy Server to Release 2.5.
The following procedure describes how to upgrade the Cisco 1100 VLAN Policy Server to Release 2.5.
Note During the upgrade, the VLAN Policy Server will reboot twice. |
The upgrade image folder opens.
a. Insert the User Registration Tool VPS Upgrade CD (version 2.5 Cisco 1100 VLAN Policy Server) in any Windows system on the network that can connect to the VLAN Policy Server.
The upgrade image folder opens.
Step 2 Double-click the autorun.bat file. A DOS command prompt opens; do not close this prompt.
Step 3 In the dialog box that opens, click the Select to update VPS appliance button. A setup dialog box opens.
Step 4 In the Appliance Host field, enter the IP address of the VLAN Policy Server.
Step 5 In the Appliance Port field, enter 1741.
Step 6 In the User name and Password fields, enter admin.
Step 7 Click Install.
Step 8 Select the radio button for the URT Releases 2.5 upgrade.
Step 9 Click Install. The installation process begins.
Step 10 After installation has completed, a dialog box opens, asking if you want to upgrade another VLAN Policy Server. Select Install next to upgrade another VLAN Policy Server, or select Cancel to end the upgrade.
After upgrading the VLAN Policy Server, you should verify the upgrade.
Step 2 In the web browser, enter http:// VLAN Policy server IP address:1741/index.html.
For example: http://171.12.12.112:1741/index.html
Step 3 In the CiscoWorks2000 desktop, enter admin in the Name and Password fields.
Step 4 From the CiscoWorks2000 desktop, select Server Configuration>Appliance Management>Appliance Status>Software Update History.
Step 5 To verify that the last installation was successful, make sure that the Status column for the software upgrade shows that the installation was successful.
After you complete the tasks listed in "Upgrading the URT Administrative Server" section, start the URT Client Administrative Interface. From the Start menu, select Programs>Urt>Start User Registration Tool. Following instructions in User Guide for the Cisco Secure User Registration Tool, refer to the following lists of tasks to configure URT Release 2.5 and activate it on the network.
This list represents the minimal number of steps required to configure and activate URT Release 2.5. See User Guide for the Cisco Secure User Registration Tool for complete information on URT functionality.
1. Add each VLAN Policy Server to URT.
2. Reconfigure the switches to use the URT VLAN Policy Server in place of the URT Servers. You may use the URT Administrative Client Interface or the command-line interface for the switches to configure them.
3. Configure URT options and URT logon script options. These options affect various aspects of URT activity, including whether URT automatically installs and upgrades the URT Client Module on Windows NT and Windows 2000 clients running on a Microsoft Networking network.
4. Install the URT logon script on the domain servers, and configure the domain servers to run the URT logon script. When this step is completed, any Windows 95, Windows 98, and Millennium Edition client that logs on to the domain has URT Release 2.5 upgraded or installed automatically, and the client begins running the URT Release 2.5 Client Module. The same is true for Windows NT and Windows 2000 clients in Microsoft Networking networks, if automatic installation is enabled in the URT logon script options.
5. If you have not enabled automatic installation, manually install the URT Client Module on Windows NT and Windows 2000 clients.
6. Add and configure RADIUS servers.
7. Add and configure LDAP servers.
Posted: Wed May 21 08:39:09 PDT 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.