Cisco Network Order Manager Reference

connect_atm

connectSubscriberToATMService

Create ATM connections on Cisco 6400 UACs, CEMF, and CNOM.

connect_scm

connectSubscriberSCM

Create other types of connections on Cisco 6400 UACs, CEMF, and CNOM.

disconnect_atm

disconnectSubscriberAndService

Disconnect ATM connection.

getConnectionData

getATMConnectionData

Retrieve ATM connection information.

create_B_profile

createBridgingServiceProfile

Create a bridging service profile.

create_IRB_profile

createIRBServiceProfile

Create an IRB service profile.

create_L2TP_profile

createL2TPServiceProfile

Create an L2TP service profile.

create_PPPoA_profile

createPPPoAServiceProfile

Create a PPP over ATM service profile.

create_R_profile

createRFC1483ServiceProfile

Create an RFC 1483 IRB profile.

create_B_service

createBridgingServiceFromProfile

Create a bridging service.

create_IRB_service

createIRBServiceFromProfile

Create an IRB service from a profile.

create_L2TP_service

createL2TPServiceFromProfile

Create an L2TP service from a profile.

create_PPPoA_service

createPPPoAServiceFromProfile

Create a PPP over ATM service from a profile.

create_R_service

createRFC1483ServiceFromProfile

Create an RFC 1483 service from a profile.

modify_B_profile

modifyBridgingServiceProfile

Modify a bridging service profile.

modify_IRB_profile

modifyIRBServiceProfile

Modify an IRB service profile.

modify_L2TP_profile

modifyL2TPServiceProfile

Modify an L2TP service profile.

modify_PPPoA_profile

modifyPPPoAServiceProfile

Modify a PPP over ATM service profile.

modify_R_profile

modifyRFC1483ServiceProfile

Modify an RFC 1483 service profile.

modify_B_service

modifyBridgingServiceFromProfile

Apply profile to change a bridging service instance.

modify_IRB_service

modifyIRBServiceFromProfile

Apply profile to change an IRB service instance.

modify_L2TP_service

modifyL2TPServiceFromProfile

Apply profile to change an L2TP service instance.

modify_PPPoA_service

modifyPPPoAServiceFromProfile

Apply profile to change a PPP over ATM service instance.

modify_R_service

modifyRFC1483ServiceFromProfile

Apply profile to change an RFC 1483 service instance.

delete_B_profile

deleteBridgingServiceProfile

Delete a bridging service profile.

delete_IRB_profile

deleteIRBServiceProfile

Delete an IRB service profile.

delete_L2TP_profile

deleteL2TPServiceProfile

Delete an L2TP service profile.

delete_PPPoA_profile

deletePPPoAServiceProfile

Delete a PPP over ATM service profile.

delete_R_profile

deleteRFC1483ServiceProfile

Delete an RFC 1483 service profile.

delete_B_service

deleteBridgingService

Delete the specified bridging service.

delete_IRB_service

deleteIRBService

Delete the specified IRB service.

delete_L2TP_service

deleteL2TPService

Delete the specified L2TP service.

delete_PPPoA_service

deletePPPoAService

Delete the specified PPP over ATM service.

delete_R_service

deleteRFC1483Service

Delete the specified RFC 1483 service.

create_qos

createConnectionTemplate

Create a QoS connection template.

delete_qos

deleteConnectionTemplate

Delete the specified QoS connection template.

modify_qos

modifyConnectionTemplate

Modify a QoS connection template.

set-IMT

setupTieLink

Create inter-machine tie (IMT) link.

unset-IMT

unsetupTieLink

Remove IMT link.

rename-IMT

renameTieLink

Rename IMT link and set new IMT name to all relative connections.

setactive-IMT

setActiveTieLink

Select which IMT link that you want to make active between two chassis.

set-IMTcount

setTieLinkCounter

Set the connections counter for how many PVCs in this IMT link.

clear_cdm

clearCDMConnection

Clear a CDM connection in CEMF and CNOM. Nodes remain unaltered.

connect_cdm

connectSubscriber_cdm

Create a subscriber PVC and apply a QoS for the PVC between the ingress port and the egress trunk port. CEMF and CNOM.

create_ni2_profile

createNI2ATMQoSProfile, createNI2DMTProfile
createNI2SDSLProfile
createNI2CAPProfile

Create DSLAM interface configuration profiles for DMT, ADSL, SDSL, CAP, and ATM QoS in the CDM system.

delete_ni2_profile

deleteNI2ATMQoSProfile deleteNI2DMTProfile deleteNI2SDSLProfile deleteNI2CAPProfile

Remove the NI-2 profile from the CDM system.

disconnect_cdm

disconnectSubscriber_cdm

Disconnect a CDM connection and remove it from the DSLAM node, CEMF, and CNOM.

get_line_id

—

Provide a means of determining which line ID is set to a specific ingress port.

get_object_for_line

—

Provide the containment path for the ingress port of a line ID.

modify_ni2_profile

modifyNI2ATMQoSProfile modifyNI2DMTProfile modifyNI2SDSLProfile modifyNI2CAPProfile

Modify an NI-2 ATM QoS profile.

set_line_ids

—

Give a line ID name to the ingress port of the DSLAM, which is used by the work order system to execute other scripts.

connect_cwm

connectSubscriber_cwm

Create a WAN connection on the CWM machine, node (through CWM) and CNOM.

connect_with_CWM

connectSubscriber_with_CWM

—

create_cwm_qos

create_cwm_QoS

Create a WAN QoS profile.

disconnect_cwm

disconnectSubscriber_cwm

Disconnect a WAN connection on the CWM machine node (by using CWM) and CNOM.

disconnect_with_CWM

disconnectSubscriber_with_CWM

—

set_wan_port

set_WAN_port_attributes

Set WAN node, shelf, slot, and port attributes.

remove_cwm_qos

remove_cwm_QoS

Delete a WAN QoS profile.

add_line_id

add_map_value

Add a line ID for a given full object path.

add_map_value

addMappingValue

—

auditLogFile

auditLogFile

Write a comment to a recovery log file.

cleanup_line_id

removeAnyObject

Remove line IDs that were not deleted before you removed a chassis or uninstalled CNOM.

get_line_id

—

Get an attribute for a given object.

get_object_for_line

Script get_object_for_value

Get a path for a line ID value.

get_object_for_value

findMappedTarget

Get a line ID for a path.

getRestoreWO

—

Restore the CNOM configuration by replaying a recovery log file.

initSequence

InitSequence

—

map_values

setMappingValues

—

remove_line_id

remove_map_value

Remove a line ID for a given path and line ID.

remove_map_value

removeMappingValue

—

reset_line_ids

reset_map_values

Reset a line ID.

reset_map_values

resetMappingValues

—

set_line_ids

map_values

Set a line ID for a given path.

socketDaSet

Invokes socketDaSet

Set attribute(s) for a given object.