cc/td/doc/product/rtrmgmt/bluelist/cwblue30
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Event Notification Messages

Event Notification Messages

Note   The information in this chapter applies to UNIX workstations (Maps and SNA View) only.

This chapter provides information on the Maps event notification messages. The APPN and DLSw Maps applications send event notification messages to the workstation network management system (NMS) when changes in network status occur. Currently, event notification messages are sent as traps to the NMS. Event notification is controlled by the event values kept in the cwbinit file.

For more information, see the "Using the cwbinit Preferences File" section section in "Starting the User Applications."

This chapter contains the following main sections:

Event Notification Message ID Syntax

Each notification message has an eight-character message ID followed by a text string. The message ID has the syntax shown in Figure 13-1.


Figure 13-1: Syntax of Event Notification Message


Where:

Severity indicates the severity of the problem that caused the message to be issued.

Message number is a three-digit message identification number.

Protocol is a two-character protocol ID that indicates to which protocol the event notification message applies:

Program is a two-character program ID that indicates which program issued the message:

Event Notification Message List

This section lists the messages in numerical order by their message IDs. The messages are listed in the following sections:

APPN Messages

The following error messages are issued by APPN:

MPAP001I APPN DLUR Node dlur_node established CPSVRMGR session with DLUS Node dlus_node

  Where:
  dlur_node is the DLUR node.
  dlus_node is the DLUS node.

MPAP002W APPN DLUR Node dlur_node lost CPSVRMGR session with DLUS Node dlus_node

  Where:
  dlur_node is the DLUR node.
  dlus_node is the DLUS node.

MPAP003W APPN DLUR Node dlur_node definition to DLUS Node dlus_node deleted.

  Where:
  dlur_node is the DLUR node.
  dlus_node is the DLUS node.

MPAP004I APPN network CP-CP TG tg_number from cp_name_1 to cp_name_2 operational

  Where:
  tg_number is the TG number.
  cp_name_1 is the CP name of the first node.
  cp_name_2 is the CP name of the second node.

MPAP005W APPN network CP-CP TG tg_number from cp_name_1 to cp_name_2 inactive

  Where:
  tg_number is the TG number.
  cp_name_1 is the CP name of the first node.
  cp_name_2 is the CP name of the second node.

MPAP006I APPN endpoint CP-CP TG tg_number from cp_name_1 to cp_name_1 operational

  Where:
  tg_number is the TG number.
  cp_name_1 is the CP name of the first node.
  cp_name_2 is the CP name of the second node.

MPAP007W APPN endpoint CP-CP TG tg_number from cp_name_1 to cp_name_2 inactive

  Where:
  tg_number is the TG number.
  cp_name_1 is the CP name of the first node.
  cp_name_2 is the CP name of the second node.

MPAP008I APPN Node node_name link link_name active

  Where:
  node_name is the APPN node.
  link_name is the link name.

MPAP009W APPN Node node_name link link_name inactive

  Where:
  node_name is the APPN node.
  link_name is the link name.

MPAP010W APPN Node node_name link link_name deleted

  Where:
  node_name is the APPN node.
  link_name is the link name.

MPAP011I APPN Node node_name port port_name active

  Where:
  node_name is the APPN node.
  port_name is the port name.

MPAP012W APPN Node node_name port port_name inactive

  Where:
  node_name is the APPN node.
  port_name is the port name.

MPAP013W APPN Node node_name port port_id deleted

  Where:
  node_name is the APPN node.
  port_id is the port ID.

MPAP014I APPN network data TG tg_number from node_name_1 to node_name_2 operational.

  Where:
  tg_number is the TG number.
  node_name_1 is the name of the first node.
  node_name_2 is the name of the second node.

MPAP015W APPN network data TG tg_number from node_name_1 to node_name_2 inactive.

  Where:
  tg_number is the TG number.
  node_name_1 is the name of the first node.
  node_name_2 is the name of the second node.

MPAP016I APPN endpoint data TG tg_number from node_name_1 to node_name_2 operational

  Where:
  tg_number is the TG number.
  node_name_1 is the name of the first node.
  node_name_2 is the name of the second node.

MPAP017W APPN endpoint data TG tg_number from node_name_1 to node_name_2 inactive

  Where:
  tg_number is the TG number.
  node_name_1 is the name of the first node.
  node_name_2 is the name of the second node.

Messages Common to APPN or DLSw

The following messages are issued by either APPN or DLSw:

MPCM001W Router router not responding to SNMP poll request

  Where:
  router is a router name or IP address.

MPCM002I Router router responding to SNMP poll request

  Where:
  router is a router name or IP address.

DLSw Messages

The following messages are issued by cwbdlswpollerd:

MPDL001I Router router1 established new DLSw peer connection with router router2

  Where:
  router1 is the host name or IP address of the first router.
  router2 is the host name or IP address of the second router. This value can also be a question mark (?) if the second router's IP address is 0.

MPDL002W Router router1 lost DLSw peer connection with router router2

  Where:
  router1 is the host name or IP address of the first router.
  router2 is the host name or IP address of the second router. This value can also be a question mark (?) if the second router's IP address is 0.

MPDL003I Router router1 recovered DLSw connection with router router2

  Where:
  router1 is the host name or IP address of the first router.
  router2 is the host name or IP address of the second router. This value can also be a question mark (?) if the second router's IP address is 0.

MPDL004I Router router1 established new DLSw circuit local_mac local_sap remote_mac remote_sap with router router2

  Where:
  router1 is the host name or IP address of the first router.
  local_mac is the MAC of the local router.
  local_sap is the SAP of the local router.
  remote_mac is the MAC of the remote router.
  remote_sap is the SAP of the remote router.
  router2 is the host name or IP address of the second router. This value can also be a question mark (?) if the second router's IP address is 0.

MPDL005W Router router1 lost DLSw circuit local_mac local_sap remote_mac remote_sap with router router2

  Where:
  router1 is the host name or IP address of the first router.
  local_mac is the MAC of the local router.
  local_sap is the SAP of the local router.
  remote_mac is the MAC of the remote router.
  remote_sap is the SAP of the remote router.
  router2 is the host name or IP address of the second router. This value can also be a question mark (?) if the second router's IP address is 0.

MPDL006I Router router1 recovered DLSw circuit local_mac local_sap remote_mac remote_sap with router router2

  Where:
  router1 is the host name or IP address of the first router.
  local_mac is the MAC of the local router.
  local_sap is the SAP of the local router.
  remote_mac is the MAC of the remote router.
  remote_sap is the SAP of the remote router.
  router2 is the host name or IP address of the second router. This value can also be a question mark (?) if the second router's IP address is 0.

SNA Host Messages

The following messages are issued by the SNA host component:

SVST001W SNA Host detected a PU name change for pu_name with IDBLK/IDNUM value

  Where:
  pu_name is the name of a PU.
  value is the hexadecimal IDBLK/IDNUM value.


hometocprevnextglossaryfeedbacksearchhelp
Posted: Mon Sep 4 10:48:38 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.