About this Guide

Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.

This section explains the objectives, intended audience, and organization of this publication and describes the conventions that convey instructions and other information.

Revision History

Document Objectives

Date	Notes
03/19/2007	Revision History Table added for the first time.
08/31/2007	Updated About This Guide chapter.

This guide explains the use of Transaction Language 1 (TL1) for the Cisco ONS 15454, ONS 15327, ONS 15310-CL, ONS 15310-MA, and ONS 15600 systems. Use this guide in conjunction with the appropriate publications listed in the Related Documentation section.

Audience

To use this publication, you should be familiar with Cisco or equivalent optical transmission hardware and cabling, telecommunications hardware and cabling, electronic circuitry and wiring practices, and preferably have experience as a telecommunications technician.

Document Organization

The Cisco ONS SONET TL1 Command Guide, R7.2 is organized into the following chapters:

Table 1 Cisco ONS SONET TL1 Command Guide Chapters
Title	Summary
"ACT Commands"	Lists activate commands.
"ALW Commands"	Lists allow commands.
"APPLY Commands"	Lists apply commands.
"CANC Commands and Messages"	Lists cancel commands.
"CHG Commands"	Lists change commands.
"CLR Commands"	Lists clear commands.
"CONN Commands"	Lists connect commands.
"COPY Commands"	Lists copy commands.
"DISC Commands"	Lists disconnect commands.
"DLT Commands"	Lists delete commands.
"ED Commands"	Lists edit commands.
"ENT Commands"	Lists enter commands.
"EX Commands"	Lists exercise commands.
"INH Commands"	Lists inhibit commands.
"INIT Commands"	Lists initialize commands.
"OPR Commands"	Lists operate commands.
"REPT Messages"	Lists report autonomous messages.
"RLS Commands"	Lists release commands.
"RMV Commands"	Lists remove commands.
"RST Commands"	Lists restore commands.
Chapter 21, "RTRV Commands"	Lists retrieve commands.
"SCHED Commands"	Lists schedule commands.
"SET Commands"	Lists set commands.
"SW Commands"	Lists switch commands.
"Access Identifiers"	Lists access identifiers.
"Conditions"	Lists conditions.
"Modifiers"	Lists modifiers.

Related Documentation

Use the Cisco ONS SONET TL1 Command Guide, R7.2 in conjunction with the following referenced publications:

•

Cisco ONS SONET TL1 Reference Guide, Release 7.0
Provides general information, procedures, and errors related to using TL1 in the Cisco ONS 15454, ONS 15327, ONS 15310-CL, ONS 15310-MA, and ONS 15600.

•

Cisco ONS SONET TL1 Command Quick Reference Guide, Releae 7.2
Provides input formats and output formats (where applicable) for all R7.2 TL1 commands and autonomous messages.

•

Cisco ONS SONET TL1 for Beginners, Release 7.0
Provides basic beginning instruction for using TL1.

•

Cisco ONS 15454 Procedure Guide, Releaes 7.2
Cisco ONS 15327 Procedure Guide, Release 7.0
Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide, Release 7.0
Cisco ONS 15600 Procedure Guide, Release 7.2
Provides procedures and tasks for the corresponding Cisco ONS node and network.

•

Cisco ONS 15454 Reference Manual, Release 7.2
Cisco ONS 15327 Reference Manual, Release 7.0
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, Release 7.0
Cisco ONS 15600 Reference Manual, Release 7.2
Provides reference material for the corresponding Cisco ONS node and network.

•

Cisco ONS 15454 Troubleshooting Guide, Release 7.2
Cisco ONS 15327 Troubleshooting Guide, Release 7.0
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, Release 7.0
Cisco ONS 15600 Troubleshooting Guide, Release 7.0
Provides general troubleshooting procedures, alarm descriptions, performance monitoring parameters, and Simple Network Management Protocol (SNMP) parameters for the corresponding Cisco ONS node and network.

•

Cisco ONS 15454 DWDM Procedure Guide, Release 7.2
Explains installation, turn up, provisioning, and maintenance for Cisco ONS 15454 dense wavelength division (DWDM) systems.

•

Cisco ONS 15454 DWDM Reference Manual, Release 7.2
Explains installation, turn up, provisioning, and maintenance for Cisco ONS 15454 dense wavelength division (DWDM) systems.

•

Cisco ONS 15454 DWDM Troubleshooting Guide, Release 7.0.1
Provides troubleshooting information and troubleshooting-related parameters for the Cisco ONS 15454 (ANSI) and Cisco ONS 15454 SDH (ETSI) platforms, specifically the dense wavelength division multiplexing (DWDM) application that can operate on either platform.

•

Ethernet Card Software Feature and Configuration Guide for the Cisco ONS 15454,
Cisco ONS 15454 SDH, and Cisco ONS 15327, Release 7.2
Provides software features for all Ethernet cards and configuration information for Cisco IOS on ML-Series cards.

•

Cisco ONS 15310-CL and Cisco ONS 15310-MA Ethernet Card Software Feature and Configuration Guide, Release 7.0
Provides software features and operations of the ML-100T-8 and the CE-100T-8 Ethernet cards for the Cisco ONS 15310-CL and the Cisco ONS 15310-MA.

•

Release Notes for the Cisco ONS 15454 Release 7.2
Release Notes for the Cisco ONS 15327 Release 7.2
Release Notes for the Cisco ONS 15310-CL Release 7.2
Release Notes for the Cisco ONS 15310-MA Release 7.2
Release Notes for the Cisco ONS 15600 Release 7.2
Provides caveats, closed issues, and new feature and functionality information.

Document Conventions

Convention	Application
[ ]	Keywords or arguments that appear within square brackets are optional.
{ x \| x \| x }	A choice of keywords (represented by x) appears in braces separated by vertical bars. The user must select one.
Ctrl	The control key. For example, where Ctrl + D is written, hold down the Control key while pressing the D key.
`screen font`	Examples of information displayed on the screen.
< >	Command parameters that must be replaced by module-specific codes.

Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the document.


Warning	IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS
Waarschuwing	BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen. BEWAAR DEZE INSTRUCTIES
Varoitus	T�RKEIT� TURVALLISUUSOHJEITA T�m� varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin k�sittelet laitteistoa, huomioi s�hk�piirien k�sittelemiseen liittyv�t riskit ja tutustu onnettomuuksien yleisiin ehk�isytapoihin. Turvallisuusvaroitusten k��nn�kset l�ytyv�t laitteen mukana toimitettujen k��nnettyjen turvallisuusvaroitusten joukosta varoitusten lopussa n�kyvien lausuntonumeroiden avulla. S�ILYT� N�M� OHJEET
Attention	IMPORTANTES INFORMATIONS DE S�CURIT� Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entra�ner des blessures ou des dommages corporels. Avant de travailler sur un �quipement, soyez conscient des dangers li�s aux circuits �lectriques et familiarisez-vous avec les proc�dures couramment utilis�es pour �viter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de s�curit� traduites qui accompagnent cet appareil, r�f�rez-vous au num�ro de l'instruction situ� � la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS
Warnung	WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen f�hren kann. Machen Sie sich vor der Arbeit mit Ger�ten mit den Gefahren elektrischer Schaltungen und den �blichen Verfahren zur Vorbeugung vor Unf�llen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen �bersetzung in den �bersetzten Sicherheitshinweisen, die zusammen mit diesem Ger�t ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF.
Avvertenza	IMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento. CONSERVARE QUESTE ISTRUZIONI
Advarsel	VIKTIGE SIKKERHETSINSTRUKSJONER Dette advarselssymbolet betyr fare. Du er i en situasjon som kan f�re til skade p� person. F�r du begynner � arbeide med noe av utstyret, m� du v�re oppmerksom p� farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for � forhindre ulykker. Bruk nummeret i slutten av hver advarsel for � finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten. TA VARE P� DISSE INSTRUKSJONENE
Aviso	INSTRU��ES IMPORTANTES DE SEGURAN�A Este s�mbolo de aviso significa perigo. Voc� est� em uma situa��o que poder� ser causadora de les�es corporais. Antes de iniciar a utiliza��o de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos el�tricos e familiarize-se com as pr�ticas habituais de preven��o de acidentes. Utilize o n�mero da instru��o fornecido ao final de cada aviso para localizar sua tradu��o nos avisos de seguran�a traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRU��ES
�Advertencia!	INSTRUCCIONES IMPORTANTES DE SEGURIDAD Este s�mbolo de aviso indica peligro. Existe riesgo para su integridad f�sica. Antes de manipular cualquier equipo, considere los riesgos de la corriente el�ctrica y familiar�cese con los procedimientos est�ndar de prevenci�n de accidentes. Al final de cada advertencia encontrar� el n�mero que le ayudar� a encontrar el texto traducido en el apartado de traducciones que acompa�a a este dispositivo. GUARDE ESTAS INSTRUCCIONES
Varning!	VIKTIGA S�KERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utf�r arbete p� n�gon utrustning m�ste du vara medveten om farorna med elkretsar och k�nna till vanliga f�rfaranden f�r att f�rebygga olyckor. Anv�nd det nummer som finns i slutet av varje varning f�r att hitta dess �vers�ttning i de �versatta s�kerhetsvarningar som medf�ljer denna anordning. SPARA DESSA ANVISNINGAR





Aviso	INSTRU��ES IMPORTANTES DE SEGURAN�A Este s�mbolo de aviso significa perigo. Voc� se encontra em uma situa��o em que h� risco de les�es corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos el�tricos e familiarize-se com as pr�ticas padr�o de preven��o de acidentes. Use o n�mero da declara��o fornecido ao final de cada aviso para localizar sua tradu��o nos avisos de seguran�a traduzidos que acompanham o dispositivo. GUARDE ESTAS INSTRU��ES
Advarsel	VIGTIGE SIKKERHEDSANVISNINGER Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. F�r du begynder arbejde p� udstyr, skal du v�re opm�rksom p� de involverede risici, der er ved elektriske kredsl�b, og du skal s�tte dig ind i standardprocedurer til undg�else af ulykker. Brug erkl�ringsnummeret efter hver advarsel for at finde overs�ttelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER

Obtaining Optical Networking Information

This section contains information that is specific to optical networking products. For information that pertains to all of Cisco, refer to the Obtaining Documentation, Obtaining Support, and Security Guideliens section.

Where to Find Safety and Warning Information

For safety and warning information, refer to the Cisco Optical Transport Products Safety and Compliance Information document that accompanied the product. This publication describes the international agency compliance and safety information for the Cisco ONS 15454 system. It also includes translations of the safety warnings that appear in the ONS 15454 system documentation.

Cisco Optical Networking Product Documentation CD-ROM

Optical networking-related documentation, including Cisco ONS 15xxx product documentation, is available in a CD-ROM package that ships with your product. The Optical Networking Product Documentation CD-ROM is updated periodically and may be more current than printed documentation.

Obtaining Documentation, Obtaining Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

Table Of Contents