|
Table Of Contents
Obtaining Optical Networking Information
Where to Find Safety and Warning Information
Cisco Optical Networking Product Documentation CD-ROM
Obtaining Documentation, Obtaining Support, and Security Guidelines
About the Documentation
Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
This section explains the objectives, intended audience, and organization of this publication and describes the conventions that convey instructions and other information.
This section provides the following information:
• Audience
• Obtaining Optical Networking Information
• Cisco Optical Networking Product Documentation CD-ROM
Revision History
Document Objectives
This guide covers the software features and operations of Ethernet cards for the Cisco ONS 15454, Cisco ONS 15454 SDH, and Cisco ONS 15327. It explains software features and configuration for Cisco IOS on the ML-Series card. The ML-Series card is a module in the Cisco ONS 15454 SONET or Cisco ONS 15454 SDH system. It also explains software feature and configuration for CTC on the E-Series, G-Series and CE-Series cards. The E-Series cards and G-Series cards are modules in the Cisco ONS 15454, Cisco ONS 15454 SDH, and Cisco ONS 15327. The CE-Series cards are modules in the Cisco ONS 15454. The CE-100T-8 is also available as module for the Cisco ONS 15310-CL. The Cisco ONS 15310-CL version of the card is covered in the Cisco ONS 15310-CL and Cisco ONS 15310-MA Ethernet Card Software Feature and Configuration Guide. Use this guide in conjunction with the appropriate publications listed in the Related Documentation section.
Audience
To use the ML-Series card chapters of this publication, you should be familiar with Cisco IOS and preferably have technical networking background and experience. To use the E-Series, G-Series and CE-Series card chapters of this publication, you should be familiar with CTC and preferably have technical networking background and experience.
Document Organization
The Cisco ONS 15454 Reference Manual, R7.0 is organized into the following chapters:
• Chapter 1, "ML-Series Card Overview," provides a description of the ML-Series card, a feature list, and explanations of key features.
• Chapter 2, "CTC Operations,"provides details and procedures for using Cisco Transport Controller (CTC) software with the ML-Series card.
• Chapter 3, "Initial Configuration," provides procedures to access the ML-Series card and create and manage startup configuration files.
• Chapter 4, "Configuring Interfaces," provides information on the ML-Series card interfaces and basic procedures for the interfaces.
• Chapter 5, "Configuring POS," provides information on the ML-Series card POS interfaces and advanced procedures for the POS interfaces.
• Chapter 6, "Configuring Bridges," provides bridging examples and procedures for the ML-Series card.
• Chapter 7, "Configuring STP and RSTP," provides spanning tree and rapid spanning tree examples and procedures for the ML-Series card.
• Chapter 8, "Configuring VLANs," provides VLAN examples and procedures for the ML-Series card.
• Chapter 9, "Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling," provides tunneling examples and procedures for the ML-Series card.
• Chapter 10, "Configuring Link Aggregation," provides Etherchannel and packet-over-SONET/SDH (POS) channel examples and procedures for the ML-Series card.
• Chapter 11, "Configuring Networking Protocols," provides network protocol examples and procedures for the ML-Series card.
• Chapter 12, "Configuring IRB," provides integrated routing and bridging (IRB) examples and procedures for the ML-Series card.
• Chapter 13, "Configuring VRF Lite," provides VPN Routing and Forwarding Lite (VRF Lite) examples and procedures for the ML-Series card.
• Chapter 14, "Configuring Quality of Service," provides quality of service (QoS) examples and procedures for the ML-Series card.
• "Configuring the Switching Database Manager," provides switching database manager examples and procedures for the ML-Series card.
• Chapter 16, "Configuring Access Control Lists," provides access control list (ACL) examples and procedures for the ML-Series card.
• Chapter 17, "Configuring Resilient Packet Ring," provides resilient packet ring (RPR) examples and procedures for the ML-Series card.
• Chapter 18, "Configuring Ethernet over MPLS," provides Ethernet over Multiprotocol Label Switching (EoMPLS) examples and procedures for the ML-Series card.
• Chapter 19, "Configuring Security for the ML-Series Card," describes the security features of the ML-Series card.
• Chapter 20, "POS on ONS Ethernet Cards," details and explains POS on Ethernet cards. It also details Ethernet card interoperability.
• Chapter 21, "Configuring RMON," describes how to configure remote network monitoring (RMON) on the ML-Series card.
• "Configuring SNMP," describes how to configure the ML-Series card for operating with Simple Network Management Protocol (SNMP).
• Chapter 23, "E-Series and G-Series Ethernet Operation," details and explains the features and operation of E-Series and G-Series Ethernet cards for the ONS 15454, ONS 15454 SDH and ONS 15327 platform.
• Chapter 24, "CE-100T-8 Ethernet Operation," details and explains the features and operation of CE-100T-8 Ethernet card .
• Chapter 25, "CE-1000-4 Ethernet Operation," describes the operation of the CE-1000-4 card.
• Appendix A, "Command Reference," is an alphabetical listing of unique ML-Series card Cisco IOS commands with definitions and examples.
• Appendix B, "Unsupported CLI Commands," is a categorized and alphabetized listing of Cisco IOS commands that the ML-Series card does not support.
• Appendix C, "Using Technical Support," instructs the user on using the Cisco Technical Assistance Center (Cisco TAC) for ML-Series card problems.
Related Documentation
Use the Cisco ONS 15454 Reference Manual, R7.0 in conjunction with the following general ONS 15454 or ONS 15454 SDH system publications:
•Cisco ONS 15454 Procedure Guide
Provides procedures to install, turn up, provision, and maintain a Cisco ONS 15454 node and network.•Cisco ONS 15454 SDH Procedure Guide
Provides procedures to install, turn up, provision, and maintain a Cisco ONS 15454 SDH node and network.•Cisco ONS 15454 Reference Manual
Provides detailed card specifications, hardware and software feature descriptions, network topology information, and network element defaults.•Cisco ONS 15454 SDH Reference Manual
Provides detailed card specifications, hardware and software feature descriptions, network topology information, and network element defaults.•Cisco ONS 15454 Troubleshooting Guide
Provides alarm descriptions, alarm and general troubleshooting procedures, error messages, and performance monitoring and SNMP parameters.•Cisco ONS 15454 SDH Troubleshooting Guide
Provides general troubleshooting procedures, alarm descriptions and troubleshooting procedures, error messages, and performance monitoring and SNMP parameters.•Cisco ONS SONET TL1 Command Guide
Provides a full TL1 command and autonomous message set including parameters, AIDs, conditions, and modifiers for the Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL, and ONS 15310-MA systems.•Cisco ONS 15454 SDH TL1 Command Guide
Provides a full TL1 command and autonomous message set including parameters, AIDs, conditions and modifiers for the Cisco ONS 15454 SDH.•Cisco ONS SONET TL1 Reference Guide
Provides general information and procedures for TL1 in the Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL, and Cisco ONS 15310-MA systems.•Cisco ONS 15454 SDH TL1 Reference Guide
Provides general information and procedures for TL1 in the Cisco ONS 15454 SDH.•Cisco ONS 15454 SDH TL1 Reference Guide
Provides general information, procedures, and errors for TL1 in the Cisco ONS 15454 SDH.•Release Notes for the Cisco ONS 15454 Release 7.0
Provides caveats, closed issues, and new feature and functionality information.•Release Notes for the Cisco ONS 15454 SDH Release 7.0
Provides caveats, closed issues, and new feature and functionality information.•Release Notes for the Cisco ONS 15327 Release 7.0
Provides caveats, closed issues, and new feature and functionality information.The ML-Series card employs the Cisco IOS Modular QoS CLI (MQC). For more information on general MQC configuration, refer to the following Cisco IOS documents:
•Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.2
•Cisco IOS Quality of Service Solutions Command Reference, Release 12.2
The ML-Series card employs Cisco IOS 12.2. For more general information on Cisco IOS 12.2, refer to the extensive Cisco IOS documentation at:
Document Conventions
This publication uses the following conventions:
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the document.
Caution Means reader be careful. In this situation, the user might do something that could result in equipment damage or loss of data.
Obtaining Optical Networking Information
This section contains information that is specific to optical networking products. For information that pertains to all of Cisco, refer to the Obtaining Documentation, Obtaining Support, and Security Guidelines section.
Where to Find Safety and Warning Information
For safety and warning information, refer to the Cisco Optical Transport Products Safety and Compliance Information document that accompanied the product. This publication describes the international agency compliance and safety information for the Cisco ONS 15454 system. It also includes translations of the safety warnings that appear in the ONS 15454 system documentation.
Cisco Optical Networking Product Documentation CD-ROM
Optical networking-related documentation, including Cisco ONS 15xxx product documentation, is available in a CD-ROM package that ships with your product. The Optical Networking Product Documentation CD-ROM is updated periodically and may be more current than printed documentation.
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Posted: Tue Sep 11 07:20:18 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.