Table Of Contents
CLR Commands
6.1 CLR-COND-SECU
CLR Commands
This chapter provides CLR (clear) commands for the Cisco ONS 15454, ONS 15327, ONS 15600 and ONS 15310-CL.
6.1 CLR-COND-SECU
Clear Security Condition
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
This command clears the specified standing condition.
Note 
In Release 6.0, only INTRUSION-PSWD parameter value is supported.
Category
Security
Security
Superuser
Related Commands
ACT-USER
ALW-MSG-SECU
ALW-USER-SECU
CANC
CANC-USER
CANC-USER-SECU
DLT-USER-SECU
ED-CMD-SECU
ED-PID
ED-USER-SECU
ENT-USER-SECU
INH-MSG-SECU
INH-USER-SECU
REPT ALM <MOD2ALM>
REPT ALM BITS
REPT ALM COM
|
REPT ALM ENV
REPT ALM EQPT
REPT ALM SECU
REPT ALM SYNCN
REPT EVT <MOD2ALM>
REPT EVT BITS
REPT EVT COM
REPT EVT ENV
REPT EVT EQPT
REPT EVT FXFR
REPT EVT IOSCFG
REPT EVT SECU
REPT EVT SESSION
REPT EVT SYNCN
RTRV-ALM-<MOD2ALM>
|
RTRV-ALM-ALL
RTRV-ALM-BITS
RTRV-ALM-ENV
RTRV-ALM-EQPT
RTRV-ALM-SYNCN
RTRV-CMD-SECU
RTRV-COND-<MOD2ALM>
RTRV-COND-ALL
RTRV-COND-BITS
RTRV-COND-ENV
RTRV-COND-EQPT
RTRV-COND-SYNCN
RTRV-DFLT-SECU
RTRV-USER-SECU
SET-ATTR-SECUDFLT
|
Input Formats
CLR-COND-SECU:[<TID>]::<CTAG>[::<SECUALMTYPE>];
Input Examples
CLR-COND-SECU:CISCO::123::INTRUSION-PSWD:
Input Parameters
Table 6-1 CLR-COND-SECU Input Parameters
Parameter and Values
|
Description
|
SECUALMTYPE
|
Secure alarm type. Defaults to INTRUSION-PSWD
Parameter type is SECUALMTYPE—security alarm type
|
•INTRUSION-PSWD
|
Condition raised after an invalid password is used during login. Condition is raised only if the password is used a specified number of times.
|
