Table Of Contents
Octal LAN 10/100 Base TX Module
11.1 Functional Description of Module
11.2 Power Consumption
11.3 External Interface
11.4 Compliance
11.5 Connector Type
11.6 References
11.6.1 IEEE Documents
11.6.2 ETSI Documents
11.6.3 ANSI Documents
11.6.4 ISO/IEC Documents
Octal LAN 10/100 Base TX Module
11.1 Functional Description of Module
The E100-8 module contains eight Ethernet interfaces that support both 10Base-T and 100Base-TX according to the IEEE 802.3 specification. The interface supports both the half-duplex and the full-duplex modes.
The interfaces are connected to an integrated Ethernet switch.
The physical interface uses a RJ-45connector. Every interface also has a LED that indicates the status of the link.
The module supports IP interfaces only.
11.2 Power Consumption
The power consumption of the E100-8 module is 5,5 W.
11.3 External Interface
The interface is a 10Base-T and 100Base-TX Ethernet interface according to the IEEE 802.3 specification.
The cable type must be CAT5-STP.
The connectors are RJ-45 connectors; Table 11-1 lists the pin-outs.
:
Table 11-1 Pin-Out Ethernet Port
Pin
|
Signal
|
1
|
TxD+
|
2
|
TxD--
|
3
|
RxD+
|
4
|
NC
|
5
|
NC
|
6
|
RxD--
|
7
|
NC
|
8
|
NC
|
Figure 11-1 Octal LAN 10/100Base TX module, E100-8
11.4 Compliance
Table 11-2 10/100BASE-T Interface Compliance
Standard
|
Comment
|
ISO/IEC8877
|
MAU MDI connector
|
IEEE 802.3
|
Clause 14, Twisted pair MAU and baseband medium type 10BASE-T
Clause 25, PMD sublayer and baseband medium type 100BASE-TX
Clause 24, PCS and PMA sublayer, type 100BASE-X
Clause 28, Auto-negotiation on Twisted pair
|
ANSI X3.263:1995
|
Physical medium 100BASE-TX
|
11.5 Connector Type
8x RJ-45 Fast Ethernet
•
Pins available: 8x 8pin
•Spare pins: 8x 4
LAN1 to LAN8 are numbered from upper left corner.
Traffic and link status are indicated in a LED (light pipe) which is formed as an arrow, pointing on the actual port.
Table 11-3 Fast Ethernet Port Pinouts
Signal name
|
Pin
|
I/O
|
Signal Description
|
LAN 1
|
RJ_TX1+
|
1
|
O
|
Transmit+ LAN 1
|
RJ_TX1-
|
2
|
O
|
Transmit- LAN 1
|
RJ_RX1+
|
3
|
I
|
Receive+ LAN 1
|
RJ_RX1-
|
6
|
I
|
Receive- LAN 1
|
LAN 2
|
RJ_TX2+
|
1
|
O
|
Transmit+ LAN 2
|
RJ_TX2-
|
2
|
O
|
Transmit- LAN 2
|
RJ_RX2+
|
3
|
I
|
Receive+ LAN 2
|
RJ_RX2-
|
6
|
I
|
Receive- LAN 2
|
LAN 3
|
RJ_TX3+
|
1
|
O
|
Transmit+ LAN 3
|
RJ_TX3-
|
2
|
O
|
Transmit- LAN 3
|
RJ_RX3+
|
3
|
I
|
Receive+ LAN 3
|
RJ_RX3-
|
6
|
I
|
Receive- LAN 3
|
LAN 4
|
RJ_TX4+
|
1
|
O
|
Transmit+ LAN 4
|
RJ_TX4-
|
2
|
O
|
Transmit- LAN 4
|
RJ_RX4+
|
3
|
I
|
Receive+ LAN 4
|
RJ_RX4-
|
6
|
I
|
Receive- LAN 4
|
LAN 5
|
RJ_TX5+
|
1
|
O
|
Transmit+ LAN 5
|
RJ_TX5-
|
2
|
O
|
Transmit- LAN 5
|
RJ_RX5+
|
3
|
I
|
Receive+ LAN 5
|
RJ_RX5-
|
6
|
I
|
Receive- LAN 5
|
LAN 6
|
RJ_TX6+
|
1
|
O
|
Transmit+ LAN 6
|
RJ_TX6-
|
2
|
O
|
Transmit- LAN 6
|
RJ_RX6+
|
3
|
I
|
Receive+ LAN 6
|
RJ_RX6-
|
6
|
I
|
Receive- LAN 6
|
LAN 7
|
RJ_TX7+
|
1
|
O
|
Transmit+ LAN 7
|
RJ_TX7-
|
2
|
O
|
Transmit- LAN 7
|
RJ_RX7+
|
3
|
I
|
Receive+ LAN 7
|
RJ_RX7-
|
6
|
I
|
Receive- LAN 7
|
LAN 8
|
RJ_TX8+
|
1
|
O
|
Transmit+ LAN 8
|
RJ_TX8-
|
2
|
O
|
Transmit- LAN 8
|
RJ_RX8+
|
3
|
I
|
Receive+ LAN 8
|
RJ_RX8-
|
6
|
I
|
Receive- LAN 8
|
11.6 References
11.6.1 IEEE Documents
•IEEE 802.3
–Clause 14, Twisted pair MAU and baseband medium type 10BASE-T
–Clause 25, PMD sublayer and baseband medium type 100BASE-TX
–Clause 24, PCS and PMA sublayer, type 100BASE-X
–Clause 28, Auto-negotiation on Twisted pair
11.6.2 ETSI Documents
•EN 50081-1, January 1992 "Electromagnetic compatibility-Generic emission standard, Part 1: commercial and light industry (CE marking requirements)"
•EN50082-1, January 1992 "Electromagnetic compatibility- Generic immunity standard, Part 1: Residential, commercial and light industry"
•EN 60950 Safety of Information Technology Equipment Including Electrical Business Equipment
•ETS 300 019 European Telecommunications Standard for Environment
11.6.3 ANSI Documents
•ANSI X3.263, 1995 Physical medium 100BASE-TX
11.6.4 ISO/IEC Documents
•ISO/IEC8877 MAU MDI connector
