|
This chapter contains tables and checklists to use during the first turn up and test of a Cisco ONS 15200 system. When you are performing the turn up and test procedures in "Turn Up and Test," you are asked to complete the tables in this appendix to prepare for customer acceptance of the ONS 15200 system.
Table A-3 ONS 15200 Network Configuration Checklist
Step | Related Step in Chapter 4 | Description | Pass | Fail |
---|---|---|---|---|
Table A-4 ONS 15252 MCU Turn Up and Test Procedure Checklist
Step | Related Step in Chapter 4 | Description | Pass | Fail |
---|---|---|---|---|
Table A-5 ONS 15252 MCU CLIP Data
Slot Number | CLIP Serial Number | ITU Channel Number | ITU Frequency (THz) | Wavelength (nm) | Tx Power (dB) | MU Transmit Attenuator (8 or 0 dB) | Splitter Ratio |
---|---|---|---|---|---|---|---|
Note The expected minimum and maximum transmit power is provided by your network planner. Actual transmit power must be within the range provided by your network planner. |
Table A-6 A-Side ONS 15252 MCU Wavelength and Output Power Data
A-Side Slot Number | Wavelength Expected (nm) | Wavelength Reading from Frequency Meter (nm) | Output Power Expected (dBm) | Output Power Measured (dBm) | Output Power Measured Within Network Planner Range Pass or Fail |
---|---|---|---|---|---|
Table A-7 B-Side ONS 15252 MCU Wavelength and Output Power Data
B-Side Slot Number | Wavelength Expected (nm) | Wavelength Reading from Frequency Meter (nm) | Output Power Expected (dBm) | Output Power Measured (dBm) | Output Power Measured Within Network Planner Range Pass or Fail |
---|---|---|---|---|---|
Table A-8 ONS 15252 MCU DWDM Receive Data
Slot Number | Attenuated OSA Reading A Side | DWDM A-Side Rx Expected (dBm) |
DWDM A-Side Rx Measured (dBm) |
Pass or Fail | Attenuated OSA Reading B-Side | DWDM B-Side Rx Expected (dBm) |
DWDM B-Side Rx Measured (dBm) |
---|---|---|---|---|---|---|---|
Table A-9 ONS 15252 MCU Client Transmit Data
Slot Number | Measured Client Transmitt power (dBm) | Pass or Fail Valid Range -8 to -10dBm |
---|---|---|
Table A-11 ONS 15201 Turn Up and Test Procedure Checklist
Step | Related Step in Chapter 4 | Description | Pass | Fail |
---|---|---|---|---|
Table A-12 ONS 15201 SCU CLIP Data
CLIP Serial Number | ITU Channel Number | ITU Frequency (THz) | Wavelength (nm) | Tx Power (dBm) | MU Attenuation |
Splitter Ratio |
---|---|---|---|---|---|---|
Table A-13 ONS 15201 SCU Wavelength and Output Power Data
Output Port |
Wavelength Expected (nm) |
Wavelength Reading from Frequency Meter (nm) | Output Power Expected (dBm) |
Output Power Measured (dBm) |
Output Power Measured Within Range Pass or Fail |
---|---|---|---|---|---|
Table A-14 ONS 15201 SCU DWDM Receive Data
Attenuated OSA Reading A Side | DWDM A-Side Rx Expected (dBm) |
DWDM A-Side Rx Measured (dBm) |
Pass or Fail | Attenuated OSA Reading B Side | DWDM B-Side Rx Expected (dBm) |
DWDM B-Side Rx Measured (dBm) |
Pass or Fail |
---|---|---|---|---|---|---|---|
Table A-15 ONS 15201 SCU Client Transmit Data
CLIP Serial Number | Measured Client Transmit Power (dBm) | Pass or Fail Valid Range -8 to -10 dBm |
---|---|---|
Posted: Thu Apr 17 13:52:08 PDT 2003
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.