|
This chapter contains tables and checklists sheets to use during the first turn up and test of a Cisco ONS 15200 system. When you are performing the turn up and test procedures in "Turn Up and Test," you are asked to complete the tables in this appendix to prepare for customer acceptance of the ONS 15200 system.
Customer |
|
Site Name |
|
Location |
|
System Configuration |
|
Lead Engineer |
|
Test Engineer |
|
Test Engineer |
|
Date |
|
Related Step in Chapter 4 | Description | Pass | Fail |
---|---|---|---|
All Client Layer Interface Port modules display correctly |
|
|
Related Step in Chapter 4 | Description | Pass | Fail |
---|---|---|---|
Data is consistent with network planner |
|
| |
A-side Hub Filter Module (HFM) order correct |
|
| |
B-side HFM order correct |
|
| |
Alarm verification |
|
| |
A-side to B-side switch |
|
| |
A-side standby, B-side active |
|
| |
B-side to A-side switch |
|
| |
A-side active, B-side standby |
|
| |
BER test error free for 15 minutesunprotected |
|
| |
BER test error-free for 15 minutesA-side |
|
| |
BER test error-free for 15 minutesB-side |
|
|
Slot Number | CLIP Serial Number | ITU Channel Number | ITU Frequency (THz) | Wavelength (nm) | Tx Power (dB) | MU Transmit Attenuator (8 or 0 dB) | Splitter Ratio |
---|---|---|---|---|---|---|---|
1 |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
8 |
|
|
|
|
|
|
|
9 |
|
|
|
|
|
|
|
10 |
|
|
|
|
|
|
|
11 |
|
|
|
|
|
|
|
12 |
|
|
|
|
|
|
|
13 |
|
|
|
|
|
|
|
14 |
|
|
|
|
|
|
|
15 |
|
|
|
|
|
|
|
16 |
|
|
|
|
|
|
|
Note The expected minimum and maximum transmit power is provided by your network planner. Actual
transmit power must be within the range provided by your network
planner.
|
Related Step in Chapter 4 | Description | Pass | Fail |
---|---|---|---|
Data is consistent with your network planner |
|
| |
Alarm verification |
|
| |
B side to A side switch |
|
| |
A side active, B side standby |
|
| |
A side to B side switch |
|
| |
A side standby, B side active |
|
| |
BER test error-free for 15 minutes A-side |
|
| |
BER test error-free for 15 minutes B-side (unprotected) |
|
| |
BER test error free for 15 minutes unprotected |
|
| |
BER test error-free for 15 minutes A-side |
|
| |
BER test error-free for 15 minutes B-side |
|
|
CLIP Serial Number | ITU Channel Number | ITU Frequency (THz) | Wavelength (nm) | Tx Power (dBm) | MU Attenuation | Splitter Ratio |
---|---|---|---|---|---|---|
|
|
|
|
|
|
|
Output Port | Wavelength Expected (nm) | Wavelength Reading from Frequency Meter (nm) | Output Power Expected (dBm) | Output Power Measured (dBm) | Output Power Measured Within Range Pass or Fail |
---|---|---|---|---|---|
A |
|
|
|
|
|
B |
|
|
|
|
|
Attenuated OSA Reading A Side | DWDM A-Side Rx Expected (dBm) | DWDM A-Side Rx Measured (dBm) | Pass or Fail | Attenuated OSA Reading B Side | DWDM B-Side Rx Expected (dBm) | DWDM B-Side Rx Measured (dBm) | Pass or Fail |
---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
CLIP Serial Number | Measured Client Transmit Power (dBm) | Pass or Fail Valid Range -8 to -10 dBm |
---|---|---|
|
|
|
CLIP Serial Number | Switchmode |
---|---|
|
|
Related Step in Chapter 4 | Description | Pass | Fail |
---|---|---|---|
BER test error-free for 2 hours unprotected |
|
| |
BER test error-free for 2 hours A-side |
|
| |
BER test error-free for 2 hours B-side |
|
|
Note The comparison between measured and expected values is only relevant when the fiber has been
characterized.
|
Note The comparison between measured and expected values is only relevant when the fiber has been
characterized. The expected received power (both a maximum and minimum value) is provided by
your network planner. The value is based on customer-provided data for fiber loss. Actual received power must fall within the range provided by your network planner.
|
Posted: Thu Jan 10 16:35:47 PST 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.