cc/td/doc/product/mels
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table Of Contents

Cisco Metro 1500 Series Optical Isolator Configuration Note

Contents

Introduction

Installation Notes

Specifications

Related Documentation

Obtaining Documentation

World Wide Web

Documentation CD-ROM

Ordering Documentation

Obtaining Technical Assistance

Cisco Connection Online

Technical Assistance Center


Cisco Metro 1500 Series Optical Isolator Configuration Note


This configuration note describes the usage of the optical isolator (OI) that can be used with the
Cisco Metro 1500 series metropolitan area network (MAN) dense wavelength division multiplexing (DWDM) system.

Contents

This configuration note contains the following information:

Introduction

Installation Notes

Specifications

Related Documentation

Obtaining Documentation

Obtaining Technical Assistance

Cisco Connection Online

Documentation CD-ROM


Note This configuration note is used in conjunction with the Cisco Metro 1500 Series Management Guide and the Cisco Metro 1500 Series Operations Guide. Refer to these guides for complete operating instructions.


Introduction

The Cisco Metro 1500 series optical isolator (OI) allows direct transmission from a wavelength channel module (WCM) over a remote (or trunk) fiber. The OI enables a WCM to bypass the multiplexing/demultiplexing (MUX/DMX) module in the Cisco Metro 1500 series chassis. By connecting the WCM to the OI through fiber jumpers, you can transmit directly over the remote fiber and obtain an additional 3 dB to 5 dB for use in your optical budget.

The OI minimizes optical back reflection. Optical back reflection is common in fiber-based transmissions. Back reflection is a small amount of light that is reflected back towards the transmitting optical component. The OI absorbs this reflected light so that the transmitting optical component operates with minimal interference.

Installation Notes

The OI is connected directly to a jumper that extends from the remote connection of the WCM. The OI sits between the WCM and the remote (or trunk) fiber. See Figure 1.

Figure 1 Optical Isolator Connection Scenario

To connect the OI, follow these guidelines:

The optical connector coming out of a WCM is MU type. Cisco stocks fiber jumpers that use an "MU to SC" type connection. This is the standard jumper configuration. However, the isolator can be used with a number of different connector types if needed.

The fiber jumper coming out of the WCM is connected to the fiber attached to the OI. Two SC connectors (for example) are connected.

The fiber on the other side of the OI is connected to the trunk or remote fiber; two SC connectors (for example) are connected.

Specifications

Table 1 lists the specifications of the OI.

Table 1 Optical Isolator Specifications 

Category
Value

Wavelength band

1520 - 1620 nm

Typical peak isolation

53 dB (min.)

Minimum isolation

32 dB (min.)

Typical insertion loss

0.7 dB

Maximum insertion loss

1.2 dB (max.)

Return loss

58 dB (min.)

PDL

0.15 dB (max.)

PMD

0.07 ps (max.)

Maximum optical power

300 mW

Maximum tensile load

5 N

Operating temperature

- 20 to + 60 C

Storage temperature

- 40 to + 85 C

Fiber length

1 m


Related Documentation

The following documents are available for the Cisco Metro 1500 series:

Cisco Metro 1500 Series Management Guide
Customer order number DOC-7810590=

Cisco Metro 1500 Series Operations Guide
Customer order number DOC-7810588=

Cisco Metro 1500 Series Spares Installation Note
Customer order number DOC-7810595=

Cisco Metro 1500 Series Release Notes
Customer order number DOC-7810596=

For further information, see the "Obtaining Documentation" section.

Obtaining Documentation

World Wide Web

You can access the most current Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly. Therefore, it is probably more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.

Ordering Documentation

Registered CCO users can order the Documentation CD-ROM and other Cisco Product documentation through our online Subscription Services at http://www.cisco.com/cgi-bin/subcat/kaojump.cgi.

Nonregistered CCO users can order documentation through a local account representative by calling Cisco's corporate headquarters (California, USA) at 408 526-4000 or, in North America, call 800 553-NETS (6387).

Obtaining Technical Assistance

Cisco provides Cisco Connection Online (CCO) as a starting point for all technical assistance. Warranty or maintenance contract customers can use the Technical Assistance Center. All customers can submit technical feedback on Cisco documentation using the web, e-mail, a self-addressed stamped response card included in many printed docs, or by sending mail to Cisco.

Cisco Connection Online

Cisco continues to revolutionize how business is done on the Internet. Cisco Connection Online is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.

CCO's broad range of features and services helps customers and partners to streamline business processes and improve productivity. Through CCO, you will find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online support services, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.

Customers and partners can self-register on CCO to obtain additional personalized information and services. Registered users may order products, check on the status of an order and view benefits specific to their relationships with Cisco.

You can access CCO in the following ways:

WWW: www.cisco.com

Telnet: cco.cisco.com

Modem using standard connection rates and the following terminal settings: VT100 emulation; 8 data bits; no parity; and 1 stop bit.

From North America, call 408 526-8070

From Europe, call 33 1 64 46 40 82

You can e-mail questions about using CCO to cco-team@cisco.com.

Technical Assistance Center

The Cisco Technical Assistance Center (TAC) is available to warranty or maintenance contract customers who need technical assistance with a Cisco product that is under warranty or covered by a maintenance contract.

To display the TAC web site that includes links to technical support information and software upgrades and for requesting TAC support, use www.cisco.com/techsupport.

To contact by e-mail, use one of the following:

Language
E-mail Address

English

tac@cisco.com

Hanzi (Chinese)

chinese-tac@cisco.com

Kanji (Japanese)

japan-tac@cisco.com

Hangul (Korean)

korea-tac@cisco.com

Spanish

tac@cisco.com

Thai

thai-tac@cisco.com


In North America, TAC can be reached at 800 553-2447 or 408 526-7209. For other telephone numbers and TAC e-mail addresses worldwide, consult the following web site: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.


hometocprevnextglossaryfeedbacksearchhelp

Posted: Thu Aug 30 06:40:22 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.