|
|
Table Of Contents
Release Notes for Cisco ONS 15540 ESPx
10-GE Transponder Module Functional Image Release 2.14Determining the Release of Your 10-GE Transponder Module Functional Image
Caveat Symptoms and Workarounds
Obtaining Technical Assistance
Cisco Technical Support Website
Definitions of Service Request Severity
Obtaining Additional Publications and Information
Release Notes for Cisco ONS 15540 ESPx
10-GE Transponder Module Functional Image Release 2.14
July 15, 2004
Cisco ONS 15540 ESPx transponder module (product numbers 15540-10GE-03B3xxx) functional image release 2.14
Text Part Number: OL-6312-01
This document describes the features and caveats for the functional image, release 2.14, for the 10-GE transponder modules used with the Cisco ONS 15540 ESPx.
Contents
This release note includes the following sections:
•
Caveats
•
•
Introduction
The 10-GE transponder module is double the size of the 2.5-Gbps transponder module and requires a special 10-Gbps line card motherboard. You can install up to two 10-GE transponder modules in a 10-Gbps line card motherboard. Each transponder supports one client side and one trunk side interface. The client side is a short-reach 1310-nm interface and the trunk side interface is an ITU grid compliant 15xx-nm long-reach interface. The 10-GE transponder module is available in 32 versions, one for each of the 32 ITU channels it supports.
The 10-GE transponder module is not protocol independent; it supports the 802.ae specification for 10GBASE-LR interfaces.
Determining the Release of Your 10-GE Transponder Module Functional Image
This section describes the process you use to determine the existing functional image version installed on your 10-GE transponder module.
To display the functional image version in a 10-GE transponder module, use the following command in privileged EXEC mode:
Example
The following example shows the functional image information for the 10-GE transponder module in slot 11/1:
Switch# show hardware detail--------------------------------------------------------------------------------15540_Chassis_with_external_patch_support named Switch, Date:17:18:01 IST Thu Jul 15 2004----------------------------------------------------------------------------------------------------------------------------------------------------------------Slot Number :11/1Controller Type :0x1014On-Board Description :10GE_1550_ch56_CSCO29Orderable Product Number:15540-10GE-03B329=Board Part Number :800-18941-03Board Revision :A0Serial Number :CNH07400018Manufacturing Date :10/14/2003Hardware Version :5.60RMA Number :RMA Failure Code :Optical Rx Power Table :IDPROM based, calibratedFunctional Image Version:2.13
Function-ID :0Transceiver type :Non-pluggable Transceiver--------------------------------------------------------------------------------<Information deleted>Updating to a New Release
For detailed functional image upgrade instructions, refer to the Cisco ONS 15540 ESPx Configuration Guide. To download the 10-GE transponder module functional image, go to the following URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/ons15540-fpga.
Caution
Caveats
This section lists the caveat for the 10-GE transponder module functional image.
Use Table 1 to determine the status of a particular caveat and its relevancy to your transponder module. In the table, "C" indicates a closed or fixed caveat, and "O" indicates an open caveat.
Note
Table 1 Transponder Module Functional Image Release Caveat Reference
C
O
\
Caveat Symptoms and Workarounds
This section describes the caveats for this release of the 10-GE transponder module functional image.
Symptom: The show interfaces waveethernetphy command output may show a high receive power level on the trunk even when there is no input signal or cable connected to the card. This is only seen with 10-GE transponder modules with functional image version 2.13 and hardware versions 2.0-99, 3.0-99, or 4.0-99.
Workaround: Upgrade the 10-GE transponder module functional image to version 2.14 or later.
Related Documentation
Refer to the following documents for more information about the Cisco ONS 15540 ESPx:
•
•
•
•
•
•
•
•
•
•
•
•
•
Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/univercd/home/home.htm
You can access the Cisco website at this URL:
You can access international Cisco websites at this URL:
http://www.cisco.com/public/countries_languages.shtml
Ordering Documentation
You can find instructions for ordering documentation at this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm
You can order Cisco documentation in these ways:
•
http://www.cisco.com/en/US/partner/ordering/index.shtml
•
Documentation Feedback
You can send comments about technical documentation to bug-doc@cisco.com.
You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:
Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883We appreciate your comments.
Obtaining Technical Assistance
For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, Cisco Technical Support provides 24-hour-a-day, award-winning technical assistance. The Cisco Technical Support Website on Cisco.com features extensive online support resources. In addition, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not hold a valid Cisco service contract, contact your reseller.
Cisco Technical Support Website
The Cisco Technical Support Website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, 365 days a year at this URL:
http://www.cisco.com/techsupport
Access to all tools on the Cisco Technical Support Website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Submitting a Service Request
Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool automatically provides recommended solutions. If your issue is not resolved using the recommended resources, your service request will be assigned to a Cisco TAC engineer. The TAC Service Request Tool is located at this URL:
http://www.cisco.com/techsupport/servicerequest
For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco TAC engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
To open a service request by telephone, use one of the following numbers:
Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553 2447For a complete list of Cisco TAC contacts, go to this URL:
http://www.cisco.com/techsupport/contacts
Definitions of Service Request Severity
To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.
Severity 1 (S1)—Your network is "down," or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.
Severity 3 (S3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.
Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.
Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
•
http://www.cisco.com/go/marketplace/
•
http://cisco.com/univercd/cc/td/doc/pcat/
•
•
•
http://www.cisco.com/go/iqmagazine
•
•
http://www.cisco.com/en/US/learning/index.html
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
CCSP, the Cisco Square Bridge logo, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, ProConnect, RateMUX, Registrar, ScriptShare, SlideCast, SMARTnet, StrataView Plus, SwitchProbe, TeleRouter, The Fastest Way to Increase Your Internet Quotient, TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0406R)
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Posted: Mon Dec 6 19:30:46 PST 2004
All contents are Copyright © 1992--2004 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
