|
The Catalyst 5000 family and 6000 family switches support a variety of ATM modules that permit transparent connections between legacy LANs over ATM backbones and enable permanent virtual connections (PVCs) between Catalyst 5000, 6000, and ATM core switches. The modules also support PVC traffic shaping, Multiprotocol over ATM (MPOA), Fast Simple Server Redundancy Protocol (FSSRP), and ATM fabric integration.
This chapter consists of these sections:
Note For installation information and a complete description of the Catalyst 5000 family ATM modules, refer to the Catalyst 5000 Family Installation Guide, the Catalyst 5000 Family Supervisor Engine Installation Guide, and the Catalyst 5000 Family Module Installation Guide. For installation information and a description of the Catalyst 6000 family ATM modules, refer to the Catalyst 6000 Family Installation Guide and the Catalyst 6000 Family Module Installation Guide. |
Table 1-1 lists the product numbers and features on all ATM modules supported on the Catalyst 5000 family switches, and Table 1-2 lists the product numbers and features on all ATM modules supported on the Catalyst 6000 family switches.
Product Number | Module Description |
---|---|
WS-X5156 | ATM LANE1 Dual PHY Module (UTP) |
WS-X5158 | ATM LANE Dual PHY OC-3 Module (MMF)
|
WS-X5157 | ATM LANE Dual PHY OC-3 Module (SMF)
|
WS-X5166 | ATM Dual PHY DS3 Module
|
WS-X5167 | ATM Dual PHY OC-3 LANE/MPOA6 Module (MMF)
|
WS-X5168 | ATM Dual OC-3 LANE/MPOA Module (SMF)
|
WS-X5161 | ATM Dual PHY OC-12 LANE/MPOA Module (MMF)
|
WS-X5162 | ATM Dual PHY OC-12 LANE/MPOA Module (SMF)
|
1LANE=LAN Emulation 2LEC=LAN Emulation Client 3LES=LAN Emulation Server 4BUS=broadcast and unknown server 5LECS=LAN Emulation Configuration Server 6MPOA=Multiprotocol over ATM |
Product Number | Module Description |
---|---|
WS-X6101 | ATM Dual PHY OC-12 LANE/MPOA Module (SMF) |
WS-X6101 | ATM Dual PHY OC-12 LANE/MPOA Module (MMF)
|
1LEC=LAN Emulation Client 2LES=LAN Emulation Server 3BUS=broadcast and unknown server 4LECS=LAN Emulation Configuration Server 5MPOA=Multiprotocol over ATM |
ATM modules require an additional software image, which is factory installed on the module.
Catalyst 5000 family and 6000 family share a command-line interface (CLI) with which you can configure modules and ports on the switches. For descriptions of the available CLI commands, see "Command Reference."
Catalyst 5000 family and 6000 family ATM modules support these software features:
Emulated LANs (ELANs) effectively extend VLANs across an ATM cloud. When you configure an ELAN, it is by default bound to a VLAN. Using ELANs, you can connect members of the same VLANs on different devices over an ATM link.
Catalyst 5000 and 6000 family ATM modules can be monitored and controlled with network management, with the CLI, or with alternative methods, such as CWSI, CiscoWorks 2000, and SNMP. For information on SNMP, refer to the Software Configuration Guide for your switch.
Table 1-3 shows the supported MIB objects for the ATM software releases.
For additional information on MIBs, RMON groups, and traps, refer to the Cisco public MIB directory (http://www.cisco.com/public/mibs/) and the "Enterprise MIB User Quick Reference," on Cisco Connection Online (CCO).
Software Release | MIBs |
---|---|
3.2 (2) and later | CISCO-ATM-DUAL-PHY-MIB |
51.1 and later | CISCO-ATM-DUAL-PHY-MIB |
| CISCO-ATM-PVC-MIB |
Posted: Tue Nov 28 00:10:05 PST 2000
Copyright 1989-2000©Cisco Systems Inc.