cc/td/doc/product/lan/cat2948
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Repacking a Switch

Repacking a Switch


This appendix provides repacking and shipping instructions for the Catalyst 2948G, 2948G-GE-TX, and 2980G switches if you need to return your switch to the factory.

To repack the switch using the original packaging material, follow these steps:


Step 1   Slide the pieces of the packing foam over the switch. (See Figure B-1.)


Note    The Catalyst 2948G switch is shown in Figure B-1. The repackaging procedure for the other switches is identical.

Step 2   Place the documentation and accessory kit in the box or poly bag provided.

Step 3   Place the box or poly bag containing the documentation and accessory kit on top of the packing material.

Step 4   Place the switch (with packing foam pieces) into the packing carton.

Step 5   Fold in the top flaps of the packing carton and seal with packing tape.




Figure B-1   Switch Packing Material



hometocprevnextglossaryfeedbacksearchhelp
Posted: Thu Nov 20 07:23:11 PST 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.