Table of Contents
index
- 10/100BASE-T ports
- cables and connectors B-1
- connecting to 2-26
- connection distances, maximum 1-6
- full duplex 1-6, 1-7
- half duplex 1-6
- pinouts B-2
- 100BASE-FX ports
- cables and connectors B-2
- connecting to 2-28 to 2-30
- connection distances, maximum 1-7
- 100 port mode LED 1-13 to 1-15
- 19-, 23-, and 24-inch racks 2-8
- AC power
- connecting to 2-25
- connector 1-19
- warning C-2 to C-5
- adapter pinouts
- See terminal adapter pinouts
- autonegotiation 1-6
- baud rate 2-33
- brackets
- See mounting brackets
- cables
- 10/100BASE-T ports B-1 to B-2, B-4
- 100BASE-FX, 50/125- or 62.5/125-micron fiber-optic 2-28, B-2
- crossover and straight-through pinouts B-4
- RJ-21 pinouts B-5
- rollover B-6
- rollover pinouts
- DB-25 adapter B-8
- CCO
- See Cisco.com
- chassis, warning against stacking C-8
- circuit breaker (15A) warning C-15
- Cisco.com xix
- Cisco Cluster Management Suite 1-4
- Cisco RPS
- See RPS
- CiscoWorks 2000 1-4
- Class 1 laser product warning C-25
- Cluster Management Suite 1-4
- command-line interface (CLI) 1-4
- connecting 10/100 ports to IP Phones 2-27
- connecting to
- 10/100BASE-T ports 2-26
- 100BASE-FX ports 2-28 to 2-30
- console port 2-33 to 2-34
- LRE port 2-30 to 2-32
- workstation B-7
- connection distances, maximum
- 10/100BASE-T ports 1-6
- 100BASE-FX ports 1-7
- LRE ports 2-6
- connectivity problems, solving 3-3
- connectors
- RJ-21 B-3, B-5
- connectors, See also ports
- console B-5
- connectors and cables 1-19
- 10/100BASE-T ports B-1 to B-2
- 100BASE-FX ports 1-7, B-2
- console port 2-33 to 2-34
- power (AC and RPS) 1-19
- RJ-21 connector B-3, B-5
- RPS 300 1-20
- RPS 600 1-20
- See also ports
- adapter pinouts
- RJ-45-to-DB-25 terminal B-7
- RJ-45-to-DB-9 terminal B-6
- cable B-6
- connecting to 2-33 to 2-34
- default characteristics 2-33
- conventions, document xii
- crossover cable
- connectivity problems 3-5
- pinout B-4
- default characteristics of the console port 2-33
- documentation, CD-ROM
- Catalyst 2900 XL and Catalyst 3500 XL xvi
- document conventions xii
- duplex SC connector B-2
- expansion slots
- illustration 1-5
- LEDs 1-17
- overview 1-8
- supported modules 1-8
- feedback to Cisco Systems, web xviii
- fiber-optic cable
- 50/125- or 62.5/125-micron 2-28, B-2
- front panel
- 10/100 ports 1-6
- expansion slots 1-8
- fixed ports 1-6
- LEDs 1-9
- LRE ports 1-7
- full duplex
- 10/100BASE-T ports 1-6, 1-7
- LED 1-15, 1-16
- port mode 1-15, 1-16
- ground connection warning C-14
- grounded equipment warning C-17
- half duplex
- 10/100BASE-T ports 1-6
- LED 1-15, 1-16
- port mode 1-15, 1-16
- hot-swappable modules 1-8
- HP OpenView 1-4
- installation
- attaching mounting brackets (rack-mount) 2-11, 2-17
- attaching mounting brackets (telco rack-mount) 2-16
- attaching mounting brackets (wall-mount) 2-23
- cable guide 2-20
- connecting to
- 10/100BASE-T ports 2-26
- 100BASE-FX ports 2-28 to 2-30
- console port 2-33 to 2-34
- LRE port 2-30 to 2-32
- console port
- connecting to 2-33 to 2-34
- electrical noise, avoiding 2-6
- guidelines 2-5
- mounting in a rack 2-19 to 2-20
- mounting on a wall 2-23 to 2-25
- packing list 2-6
- rack-mount 2-19 to 2-20
- table or shelf 2-7
- wall-mount 2-23 to 2-25
- warnings 2-1 to 2-4
- IOS command-line interface 1-4
- IP Phones
- connecting to 10/100 ports 2-27
- jewelry removal warning C-6
- LAN-to-phone jack 2-27
- Laser beam exposure warning C-26
- LEDs
- 100 port mode 1-13, 1-15
- DUPLX 1-16
- expansion slots 1-17
- FDUP 1-13, 1-15
- full duplex 1-15, 1-16
- half duplex 1-15, 1-16
- interpreting 1-13
- LRE 1-14, 1-16
- port status 1-9, 1-15 to 1-16
- POST results 2-25, 3-2
- RPS 1-12 to 1-13
- RPS 300 1-13
- RPS 600 1-12
- SPEED 1-14, 1-16
- STAT 1-13 to 1-16
- STAT LED 1-15
- System 1-11
- UTL 1-13, 1-15
- lightning activity warning C-23
- long-reach Ethernet
- See LRE
- LRE
- defined 1-1
- LED 1-14, 1-16
- port
- connecting to 2-30 to 2-32
- See also RJ-21 connector
-
- main disconnecting device warning C-9
- maximum connection distances
- See connection distances, maximum
- mid-mount
- See installation
- attaching mounting brackets (telco rack-mount)
- modules 1-8
- mounting brackets 2-8
- attaching 2-11, 2-16, 2-17, 2-23
- no on/off switch warning C-27
- overtemperature warning C-10
- packing list 2-6
- PC, connecting to switch 2-33
- performance problems, solving 3-3
- personnel warning C-4
- pinouts
- 10/100BASE-T ports B-2
- cable, straight-through and crossover B-4
- RJ-21 connector B-5
- RJ-45-to-DB-25 terminal adapter B-8
- RJ-45-to-DB-9 terminal adapter B-7
- rollover cable B-7, B-8
- ports
- 10/100BASE-T 1-6
- 100BASE-FX 1-7
- console 1-21
- console connector pinouts B-5
- LRE 1-7
- module 1-8
- port status LEDs 1-9, 1-15 to 1-16
- port status LEDs 1-9, 1-15 to 1-16
- POST results 2-25
- power
- connecting to 2-25
- warning C-18
- power connectors 1-19
- power on 2-25
- power supply
- AC power outlet 1-19
- RPS connector 1-19
- warning C-21
- product disposal warning C-24
- qualified personnel warning C-4
- rack installation
- bracket mounting points 2-9
- rear panel
- AC power connector 1-19
- console port B-5
- RPS connector 1-19
- RJ-21 connector
- illustration 1-7
- pinouts B-5
- RJ-45 connector, console port 2-34, B-3, B-5
- RJ-45 console port 1-18
- rollover cable 2-34, B-6
- identifying B-6
- pinouts B-8
- RPS
- LED 1-12 to 1-13
- RPS 300
- connector 1-20
- LED 1-13
- supported switches 1-19
- warning C-3
- RPS 600
- connector 1-20
- LED 1-12
- supported switches 1-19
- warning C-2
- safety C-1
- SC connectors B-2
- SPEED LED 1-14, 1-16
- stacking the chassis warning C-8
- STAT LED 1-13 to 1-16
- straight-through cable pinouts
- cables
- straight-through B-4
- SunNet Manager 1-4
- supply circuit warning C-18
- switch
- powering on 2-25
- switched ports, module 1-8
- System LED 1-11
- Telco 2-16
- telephone network power warning
- See TN power warning C-13
- Telnet, and accessing the CLI 1-4
- temperature
- maximum for installation 2-6, A-2
- warning C-10
- temperature warning C-10
- terminal, connecting to switch 2-33
- terminal adapter pinouts
- RH-45-to-RJ-45 B-7
- RJ-45-to-DB-25 B-7
- RJ-45-to-DB-9 B-6
- terminal emulation software 2-33
- TN power warning C-13
- translated warnings C-1 to C-33
- UTL LED 1-13, 1-15
- VDSL
- defined 1-1
- very-high-data-rate digital subscriber line
- See VDSL
- voltage warning C-19
- warnings
- translated C-1 to C-33
-
Posted: Wed Feb 6 09:03:54 PST 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.