|
ViewRunner for Windows is the graphical user interface application that allows you to configure your Cisco 6100 system.
Before installing any servers or applications, please have the following media available for reference:
The following sections will provide a quick overview of the hardware and software requirements necessary to install and use the Cisco ViewRunner for Windows system.
Step 1 Turn OFF your PC
Step 2 Connect the PC to the Ethernet RJ-45 adapter on the multiplexer backplane.
Step 3 Power ON the Cisco 6100.
Once the PC is connected to the Cisco 6100, follow the steps described below to install the ViewRunner for Windows software.
Step 1 Insert the ViewRunner for Windows program disk 1 into your disk drive.
Step 2 Access your disk drive icon and double-click on setup.exe.
Step 3 Follow the installation wizard prompts to begin copying the ViewRunner for Windows files. Once the copying completes, The ViewRunner for Windows icon appears in a new program group and on the desktop.
Step 4 Start ViewRunner for Windows by clicking on the ViewRunner for Windows icon.
If you choose not to use the install wizard to install ViewRunner for Windows, you can simply copy all the files from the disks or from another folder into a folder on your hard drive.
Cisco recommends that you use the default location c:\ProgramFiles\Cisco\ViewRunner 2.3.5 as the folder in which you copy ViewRunner for Windows.
You can also download the latest ViewRunner for Windows software and Cisco 6100 images from CCO using the procedures below.
Step 1 Go to the Cisco site at www.cisco.com
Step 2 Go to the "Service and Support" section.
Step 3 Click the "Software Center" link.
Step 4 Click the "Login" link at the top of the page.
Step 5 Enter your Cisco user name and password.
Step 6 Click the"Network Management Products" link.
Step 7 Click the "Cisco ViewRunner Software" link
Step 8 Click the "vr4w2.3.5.exe" link.
Step 9 The Software Download page opens and displays:
Step 10 Click on your chosen server protocol link.
Step 11 A system window opens, allowing you to browse to the folder where you wish to install the ViewRunner 2.3.5 application.
Step 12 After you select and open a folder, ViewRunner installs to that location.
Cisco ViewRunner for Windows is a Y2K compliant application. However, Cisco ViewRunner for Windows relies on third party operating systems.
For comprehensive information regarding Microsoft Y2K issues and resources, refer to the Microsoft Year 2000 Readiness Disclosure and Resource Center at: http:\\www.microsoft.com\technet\year2k\product\product.htm.
If Power Management is enabled on your computer, you may want to disable this feature. It has been verified under Windows 95 that ViewRunner will eventually be prevented from communicating through the Ethernet port when power is enabled. With Power Management disabled, this does not occur.
In Windows 95, select the Power Icon in the Control Panel and uncheck the "Allow Windows to Manage power use on this computer" option.
The ViewRunner for Windows application maintains several system files that reside in the same folder launching ViewRunner for Windows.These system files include:
The ViewRunner maintains a release definition file (RDF) which identifies the software that is compatible with each hardware module/revision for a given system release. The system controller (SC) and the ViewRunner use this file to check release compatibilities for software update downloads.
The RDF is named 9000-xxx-xx.RDF where "90900-xxx-xx" is the latest release of the system. The file is stored in the ViewRunner system folder and contains information about the software and hardware release of the Cisco 6100 components.
Please refer to the ViewRunner for Windows Provisioning and Operations Guide for specific troubleshooting and operational issues.
Posted: Sun Sep 29 00:42:52 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.