|
|
ViewRunner for HP OpenView is the Element Management System (EMS) for the Cisco 6100 Series. It is based on the industry-leading Hewlett-Packard OpenView SNMP management system, and uses an Oracle7 Relational Database Management System (RDMS) as an underlying data store.
Before you install any servers or applications, have the following media available for reference:
The following sections provide a quick overview of the hardware and software requirements necessary to install and use the ViewRunner system.
The following sections provide the information for installing HP OpenView, Oracle7 Server, ViewRunner Server applications, and ViewRunner Client applications.
Step 2 Ensure that the required operating system packages are installed:
Step 3 Ensure that changes to /etc/system are made to support the required shared memory and semaphore configurations (must be followed by a reboot).
Step 4 Install HP OpenView Version 5.01 as detailed in the HP OpenView Network Node Manager Products Installation Guide.
Step 5 Install the required HP OpenView consolidated patch.
Step 2 Create an oracle user ID that is a member of the dba group.
Step 3 Log in as oracle.
Step 4 Install the following packages from the Oracle7 Software Asset Manager:
Step 2 Change to the root directory of the ViewRunner for HP OpenView CD-ROM.
Step 3 Type pkgadd -d at the prompt.
Step 4 Select the ViewRunner Database (CSCOvrdb) as the package to install.
Step 5 Select the ViewRunner Server (CSCOvrovs) as the package to install.
Step 6 Follow the instructions in the ViewRunner for HP OpenView Installation and Administration Guide to complete the ViewRunner Server installation.
Step 2 Change to the root directory in which you installed the server applications (default /opt/CSCOvrovs).
Step 3 Execute the environment variable scripts:
Step 4 Start HP OpenView, Oracle, and the ViewRunner servers using the vrStart utility.
Step 2 Change to the root directory of the ViewRunner for HP OpenView CD-ROM.
Step 3 Type pkgadd -d . at the prompt.
Step 4 Select the ViewRunner Client (CSCOvrovc) as the package to install.
Step 5 Follow the instructions in the ViewRunner for HP OpenView Installation and Administration Guide to complete the ViewRunner Client installation.
Step 2 Change to the directory in which you installed the client applications (default /opt/CSCOvrovc).
Step 3 Execute the environment variable scripts:
Step 4 Execute OpenView Windows.
Refer to the ViewRunner for HP OpenView User Guide for specific troubleshooting and operational issues.
You must enable the ViewMap application in a new HP OpenView map before you can use the ViewRunner software. You cannot add the ViewMap capability to existing maps.
Posted: Thu Aug 2 12:28:44 PDT 2001
All contents are Copyright © 1992--2001 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.