Hardware Specifications

Table Of Contents

Hardware Specifications

Cisco 6732 Full Access Device Specifications

Power Requirements

Standards and Regulatory Compliance

Hardware Specifications

Cisco 6732 Full Access Device Specifications

Table A-1 lists specifications for the Cisco 6732 full access device.

Table A-1 Cisco 6732 Specifications

Physical characteristics of the chassis

Dimensions: (HxWxD) 15.7 inches (9U) x 19 inches x 12 inches

Weight: 41 lb

Fan and filter assembly (FFA)

Dimensions: (HxWxD) 1.75 inches (1U) x 17.125 inches x 10.625 inches

Weight: 6 lb

Air ramp

Dimensions: (HxWxD) 1.75 inches (1U) x 17.125 inches x 9.875 inches

Weight: 3 lb

DC input voltage range

-42.5 to -56 VDC

DC current rating (input)

Maximum power budget: 40A @ -48VDC

Environmental characteristics

Operating Temperature: 32oF to 131oF

Humidity 5% to 95% non-condensing

System timing

Recovered timing from DS1, T1-2-V35, STS-1 input

Stratum 3 or Stratum 4 clock on MCC provides holdover according to the corresponding Stratum level requirements during loss of synchronization

Alarms

Critical/major/minor with alarm cut off (ACO)

Alarm thresholds software programmable

Standards compliance

NEBS Zone 4 compliant

Power Requirements

The base power configuration of a Cisco 6732 (two MCC and two BPS-HP modules) is 60 watts. The typical power consumption of a Cisco 6732 is 230 watts with added AMM and BRG modules.

Table A-2 Service Module and Line Interface Module Power Requirements

Service Module

Power in Watts

Amps @ -48VDC

BPS-HP

30

0.63

MCC-STR3

30

0.63

MCC-STR4

30

0.63

AMM

6

0.125

BRG

26¹

0.54

MTAC-TEI

8

0.23

Line Interface Module

Power in Watts

Amps @ -48VDC

DSX1/8

10

0.21

DSX3/CHNL

11

0.23

FXS/16²

16

0.33

ISDN-BRI/8

7

0.21

MSDSL-2W

15

0.23

OC3c-UNI

12

0.33

RPOTS/16 2

30

0.54

RUVG/8 2

11

0.23

T1-2-V35

10

0.21

STSX1/CHNL

11

0.23

¹20 REN load (BRG Card)

²50% off hook

Standards and Regulatory Compliance

•Telcordia TR-008-CORE and GR-303-CORE

•Telcordia GR-253-CORE

•Telcordia GR-436-CORE and GR-1244-CORE, ANSI T1.101, Synchronization

•Telcordia GR-0063-CORE, NEBS - including FCC and UL

•Telcordia GR-1089-CORE

•Telcordia GR-2837

•Telcordia GR-1400

•Telcordia TR-NWT-000393

•Telcordia TR-NWT-0039

•Telcordia GR-499-CORE

•Telcordia TR-TSY-000191

•Telcordia TR-NWT-000057

•Telcordia TR-NWT-000397

•Telcordia TA-NWT-000909

•Telcordia TR-415

•Telcordia TR-418

•Telcordia TR-485

•ANSI T1.601, 1992

•IEEE 455-1986

•CB119

Physical characteristics of the chassis	Dimensions: (HxWxD) 15.7 inches (9U) x 19 inches x 12 inches Weight: 41 lb
Fan and filter assembly (FFA)	Dimensions: (HxWxD) 1.75 inches (1U) x 17.125 inches x 10.625 inches Weight: 6 lb
Air ramp	Dimensions: (HxWxD) 1.75 inches (1U) x 17.125 inches x 9.875 inches Weight: 3 lb
DC input voltage range	-42.5 to -56 VDC
DC current rating (input)	Maximum power budget: 40A @ -48VDC
Environmental characteristics	Operating Temperature: 32oF to 131oF Humidity 5% to 95% non-condensing
System timing	Recovered timing from DS1, T1-2-V35, STS-1 input Stratum 3 or Stratum 4 clock on MCC provides holdover according to the corresponding Stratum level requirements during loss of synchronization
Alarms	Critical/major/minor with alarm cut off (ACO) Alarm thresholds software programmable
Standards compliance	NEBS Zone 4 compliant

Service Module	Power in Watts	Amps @ -48VDC
BPS-HP	30	0.63
MCC-STR3	30	0.63
MCC-STR4	30	0.63
AMM	6	0.125
BRG	26¹	0.54
MTAC-TEI	8	0.23
Line Interface Module	Power in Watts	Amps @ -48VDC
DSX1/8	10	0.21
DSX3/CHNL	11	0.23
FXS/16²	16	0.33
ISDN-BRI/8	7	0.21
MSDSL-2W	15	0.23
OC3c-UNI	12	0.33
RPOTS/16 2	30	0.54
RUVG/8 2	11	0.23
T1-2-V35	10	0.21
STSX1/CHNL	11	0.23