|
Description |
Specifications |
Switch capacity
|
5 Gbps1 shared memory, nonblocking switch fabric
65,536 cells of ATM cell buffers
|
Software images
|
Default image
PNNI and plug-and-play capacity
|
Dimensions
(H x W x D)
|
21.75 in. x 17.5 in. x 12.0 in. (55.2 cm x 44.4 cm x 30.4 cm) standard 19-in. rack mount
Chassis depth with optional cable cover is 13.75 in. (34.9 cm)
NSP: 16.0 in. x 2.0 in. x 10.0 in. (40.6 cm x 5.0 cm x 25.4 cm)
NRP: 16.0 in x 1.2 in x 10.0 in (40.6 cm x 3.0 cm x 25.4 cm)
OC-3/STM-1 (SM and MM) NLC : 7.0 in. x 1.2 in. x 10.0 in. (17.7 cm x 3.0 cm x 25.4 cm)
DS3 NLC: 7.0 in. x 1.2 in. x 10.0 in. (17.7 cm x 3.0 cm x 25.4 cm)
OC-12/STM-4 NLC: 16.0 in. x 1.2 in. x 10.0 in. (40.6 cm x 3.0 cm x 25.4 cm)
|
Weight
|
Chassis minimum configuration (1 NSP, 1 PEM): 80 lb (37 kg)
Chassis fully configured (2 NSPs, 6 NRPs, 4 OC-3/STM-1 or 4 DS3 or 2 OC-12/STM-4 NLCs, and 2 PEMs): 130 lb (59 kg)
|
Input power requirement
|
1200W maximum (PEM-PWR-DC) (DC version)
1400W maximum (PEM-PWR-AC) (AC version)
|
Power dissipation
|
1200W maximum, 900W typical with maximum configuration
|
Heat dissipation
|
1200W (3768 Btu2/hr) (DC version)
1400W (4760 Btu/hr) (AC version)
|
DC input voltage range
|
- 40.5 to - 72 VDC (rated - 48/- 60 VDC)
|
DC current rating (input)
|
Maximum power budget: 20A @ - 48 VDC
|
AC input voltage range
|
90 to 255 VAC (rated 100 to 240 VAC using AC PEM)
|
AC current rating (input)
|
15A @ 100 VAC, 7A @ 240 VAC, using AC PEM
|
Airflow
|
140 cfm3 through the system blower module
200 cfm through the system blower module when the exhaust temperature exceeds 40\xb0 C
|
Operating temperature range
|
25 to 104\xb0 F (-4 to 40\xb0 C)
Short-term operating temperature is limited to 131\xb0 F (55\xb0 C) in compliance with Bellcore GR-63
|
Nonoperating temperature range
|
- 40 to 167\xb0 F (- 40 to 75\xb0 C)
|
Humidity
|
5 to 95%, noncondensing
|
Altitude
|
- 200 to 10,000 ft (- 61 to 3048 m)
|
Interface timing
|
Loop timing, network timing derived from any NLC interface, Stratum 4 accuracy when internally timed. NSP-S3B also allows network timing from CO BITS, Stratum 3 accuracy when internally timed.
|
Node switch processor (NSP)
|
64 MB DRAM, 8 MB Flash memory, 32 MB FlashDisk card (MEM-NSP-FD32M)
Upgradeable to 128 MB DRAM (MEM-NSP-128M)
Upgradeable with 350 MB Flash disk (MEM-NSP-FD350)
|
Node route processor 1 (NRP-1)
|
64 MB DRAM, 8 MB Flash memory (C6400-NRP-1)
Upgradeable to 128 MB DRAM (MEM-NRP-128M)
Upgradeable to 16 MB Flash memory (MEM-NRP-FS16M)
|
Node route processor 2 (NRP-2SV)
|
512 MB DRAM (C6400-NRP-2SV)
|
Full-height node line card (NLC) carrier module
|
Carrier module for two half-height NLCs with covers for empty slots installed (C6400-CARRIER)
|
OC-3/STM-1 SM NLC
|
NLC with two SONET STS-3c/SDH STM-1 single-mode intermediate reach fiber ports, SC connectors (NLC-2OC3-SM)
|
| Fiber-optic power levels:
|
| OC-3 single-mode intermediate reach
|
Output center wavelength
|
1261 to 1360 nm4
|
Transmit
|
Minimum: - 14.0 dBm
Maximum: - 8.0 dBm
|
Receive
|
Minimum: - 32.5 dBm
Maximum: - 8.0 dBm
|
OC-3/STM-1 MM NLC
|
NLC with two SONET STS-3c/SDH STM-1 multimode fiber ports, SC connectors (NLC-2OC3-MM)
|
| OC-3 multimode
|
Output center wavelength
|
1270 to 1380 nm
|
Transmit
|
Minimum: - 20.0 dBm
Maximum: - 14.0 dBm
|
Receive
|
Minimum: - 30.0 dBm
Maximum: - 14.0 dBm
|
DS3 NLC
|
NLC with two coaxial cable connections with BNC connectors (NLC-2DS3-BNC)
Maximum station-to-station cabling distance is 450 ft (137 m)
|
OC-12/STM-4 NLC
|
NLC with one SONET STS-12c/SDH STM-4 single-mode intermediate reach fiber ports, SC connector (NLC-1OC12-SM)
|
| Fiber-optic power levels:
|
| OC-12 single-mode intermediate reach
|
Output center wavelength
|
1261 to 1360 nm
|
Transmit
|
Minimum: - 15.0 dBm
Maximum: - 8.0 dBm
|
Receive
|
Minimum: - 28.0 dBm
Maximum: - 8.0 dBm
|
|
Gigabit Ethernet Interface Options
|
1000BASE-SX GBIC, multimode, standardized for Cisco 6400 (WS-G5484)
1000BASE-LH GBIC, single mode, stardardized for Cisco 6400 (WS-G5486)
|
NSP interface ports
|
RJ-45 IEEE 802.3 Ethernet 10BASE-T
RJ-45 auxiliary (AUX) port for modem access
RJ-45 console (CON) port for terminal access
|
ATM connections
|
32,000 point-to-point, 2048 point-to-multipoint (maximum)
|
Network management
|
Port TX and RX LEDs, switch and common equipment status LEDs
Port snooping and connection steering
Multiple standard and enterprise MIBs
Text-based command-line interface based on familiar router interface
Standard Cisco IOS security capabilities: password and TACACS,
Telnet, TFTP, BOOTP, LAN Emulation client, RFC 1577 Classical IP over
ATM client (for management access)
|
Mean time between failures
|
17 years per RIN
|
Maximum
station-to-station cabling distance
|
10BASE-T Ethernet—Category 3-5 UTP: 328 ft (100 m)
ATM single-mode—8/125-micron single-mode fiber: 9 miles (15 km)
ATM multimode—62.5/125-micron multimode fiber: 1.2 miles (2 km)
|
Agency Approvals
|
Safety:
UL 1950, CSA-C22.2 No. 950-95, EN60950,
ACA TS001, AS/NZS 3260, IEC 950, NOM 019
Laser Safety: 21CRF1040, Subchapter J, EN60825-1, EN60825-2
Emission:
47CFR15 Class A (FCC), CISPR22 Class B, EN55022 Class A, AS/NZS 3548 Class B, ICES-003 Class B, VCCI Class B, BSMI (CNS 13438) Class B, IEC1000-3-2, IEC1000-3-3
Immunity:
EN61000-4-2/IEC-61000-4-2
EN61000-4-3/IEC-61000-4-3
EN61000-4-4/IEC-61000-4-4
EN61000-4-5/IEC-61000-4-5
EN61000-4-6/IEC-61000-4-6
EN61000-4-11/IEC-61000-4-11
EN61000-3-2/IEC-61000-3-2
Bellcore:
GR-63-CORE, GR-1089-CORE, SR-3580 NEBS Level 3
ETSI:
EN 300 386-2
|
