EISA HP Adapter Driver Software Version 1.2 for HP-UX Version 10.0 Release Note

Supplement to DOC-EISAHPUM1 (Document Number 78-1276-01)

Introduction

This release note describes the features, modifications, and caveats of the CDDI/FDDI EISA HP Adapter Driver software Version 1.1 used with HP-UX Version 10.0 and Version 2.3 used with HP-UX Version 9.x and earlier. Refer to the Workgroup CDDI/FDDI EISA HP Adapter User Guide for detailed information about the CDDI/FDDI EISA HP Adapters.

Product Overview

The Copper Distributed Data Interface (CDDI) and Fiber Distributed Data Interface (FDDI) Extended Industry Standard Architecture (EISA) Hewlett-Packard (HP) adapters provide a single attachment or dual attachment connection for HP Apollo 9000 Series 700 workstations that is fully compliant with Station Management (SMT) revision 6.2 or 7.3. Refer to the chapter "Product Overview" of the Workgroup CDDI/FDDI EISA HP Adapter User Guide for further explanation of product features and functions.

HP-UX Version 10.0 Adapter Driver Version 1.2 Features

The following new feature has been added to the EISA HP Adapter Driver software Version 1.2:

1. Support for HP-UX Version 10.0. For detailed installation information, refer to the Errata for Workgroup CDDI/FDDI EISA HP Adapter User Guide.
   

HP-UX Version 9.0 Adapter Driver Version 2.3 Features

The following new features have been added to the EISA HP Adapter Driver software Version 2.3:

1. Support for SMT Revision 6.2 or 7.3 with turbo and SMT 6.2 for nonturbo EISA HP adapters. Table 1 is a matrix showing the correct Flashcode filename to be downloaded depending on your SMT version and adapter card type.
   

Table  1: Flashcode File Matrix

Filename	SMT Version	Adapter Card Type	Product Number
eisa26.rom	6.2	Nonturbo	WA-C320, WA-C321M, WA-C323
eisa36.rom	6.2	Turbo	WA-C320T, WA-C321T, WA-X323T
eisa42.rom	7.3	Turbo	WA-C320T, WA-C321T, WA-C323T

The appendix "Download Utilities" describes how to use the download_flash utility to update the firmware on the EISA HP adapter.

1. IP Multicasting support.
   
   
2. Support for SNMP MIB II.
   
   
3. System object IDs changed from crescendo to cisco.