Installing Bundled Sybase Database (Clean Install Only)

Table Of Contents

Installing Bundled Sybase Database (Clean Install Only)

installsyb.sh Script Usage

Installing the Bundled Sybase Database

Installing Bundled Sybase Database (Clean Install Only)

This module describes how to install the bundled Sybase database.

The CM distribution packages with a Linux or Solaris suffix contain a bundled Sybase database suitable for that platform. This database can be easily installed by running the installsyb.sh script.

If you do not want to install the Sybase database, go to Installing the CM.

• installsyb.sh Script Usage

• Installing the Bundled Sybase Database

installsyb.sh Script Usage

The script usage is as follows:

installsyb.sh--sybhome=SYBHOME--datadir=DATADIR
•SYBHOME is the home directory of the Sybase user (and should have 1 GB free). This directory must not exist prior to script execution.

•Select one of the following data location options:

–Specify --datadir=DATADIR , where DATADIR is a directory in which all Sybase data is stored.

This location should be in a partition with at least 15 GB free and must exist prior to script execution.

If you have problems installing Sybase, see the "Phase 1: Installing Sybase" section in the Cisco SCMS Collection Manager User Guide.

Installing the Bundled Sybase Database

Step 1 Change directory to sybase in the distribution kit root.

Step 2 Run the installsyb.sh script

# installsyb.sh
Step 3 After the script completes, set a password for the sybase user

Use the passwdcommand as follows:

# passwd sybase