Table Of Contents

New and Changed Features

New and Changed Features

---

This document contains a summary of the new and changed features for the Catalyst 8540, Catalyst 8510, and LightStream 1010 switch router documentation for Cisco IOS Release 12.1(26)EB.

Table 1 lists the new and changed features in the ATM Switch Router Software Configuration Guide:

Table 1 New and Changed Features in the ATM Switch Router Software Configuration Guide

Feature	Platform Supported	Description	Chapter or Section
Configuring Access Filters on Soft PVC and Soft PVP Passive Connections	Catalyst 8540 MSR Catalyst 8510 MSR LightStream 1010	•Prevents unauthorized access to an ATM network by external users. •Reserves the required resources for expected connections to switch.	Refer to Chapter 7 Configuring Virual Connections in the ATM Switch Router Software Configuration Guide.
Configuring Backup Addresses for Soft PVC and Soft PVP Connections	Catalyst 8540 MSR Catalyst 8510 MSR LightStream 1010	Allows you to configure the same NSAP address on two different ATM interfaces.	Refer to Chapter 7 Configuring Virual Connections in the ATM Switch Router Software Configuration Guide.
Configuring Timer Rules Based Soft PVC and Soft PVP Connections	Catalyst 8540 MSR Catalyst 8510 MSR LightStream 1010	Allows you to configure a timer rule to set up or tear down a soft PVC or soft PVP based on the timer values configured.	Refer to Chapter 7 Configuring Virual Connections in the ATM Switch Router Software Configuration Guide.

Table 2 lists the new and changed features in the ATM and Layer 3 Switch Router Command Reference.

Table 2 New and Changed Features in the ATM and Layer 3 Switch Router Command Reference

Feature	Platform Supported	Description	Commands
Access filters	Catalyst 8540 MSR Catalyst 8510 MSR LightStream 1010	This feature allows you to configure access control filters on soft PVC and soft PVP passive connections.	atm soft-vc (point-to-point) atm soft-vp show atm soft-vc show atm vc show atm vp
Rule-based timers	Catalyst 8540 MSR Catalyst 8510 MSR LightStream 1010	This feature allows you to configure rules-based timers on soft PVC and soft PVP connections.	atm soft-vc (point-to-point) atm soft-vp atm timer group atm timer rule show atm timer group show atm timer rule timer-rule

CCSP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StrataView Plus, SwitchProbe, TeleRouter, The Fastest Way to Increase Your Internet Quotient, TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0411R)

Posted: Fri May 27 10:59:44 PDT 2005
All contents are Copyright © 1992--2005 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.