New and Changed Features, 12.1(22)EB

This document contains a summary of the new and changed features for the Catalyst 8540, Catalyst 8510, and LightStream 1010 switch router documentation for Cisco IOS Release 12.1(22)EB.

Table 1 lists the new and changed features in the ATM Switch Router Software Configuration Guide:

Table 1 New and Changed Features in the ATM Switch Router Software Configuration Guide


Feature	Platform Supported	Description	Chapter or Section
Explicit Paths on CES VCs	Catalyst 8540 MSR Catalyst 8510 MSR LightStream 1010	Allows manual configuration of either a fully specified or partially specified path for routing CES soft PVC and SVC connections.	Configuring Explicit Paths on CES VCs
Backup ATM NSAP address support for soft PVCs and soft PVPs	Catalyst 8540 MSR Catalyst 8510 MSR LightStream 1010	Allows configuration of the same NSAP address on two different ATM interfaces.	Configuring Backup Addresses for Soft PVC and Soft PVP Connections
ATM Forum CES MIB support	Catalyst 8540 MSR Catalyst 8510 MSR LightStream 1010	Allows support for the ATM Forum CES IWF MIB and SNMP agent code and all the MIB objects described in the specification.	Functions Supported by CES Modules
Pass along bit support for ATM signaling messages	Catalyst 8540 MSR Catalyst 8510 MSR LightStream 1010	Allows processing the pass along request (bit 4) in the instruction field of a received message as described in the PNNI specification.	Overview

Table 2 lists the new and changed features in the ATM and Layer 3 Switch Router Command Reference.

Table 2 New and Changed Features in the ATM and Layer 3 Switch Router Command Reference


Feature	Platform Supported	Description	Commands
Explicit Paths on CES VCs	Catalyst 8540 MSR Catalyst 8510 MSR LightStream 1010	Allows manual configuration of either a fully specified or partially specified path for routing CES soft PVC and SVC connections.	ces pvc (Soft PVC) ces svc
Redundant soft-PVCs and soft-PVPs	Catalyst 8540 MSR Catalyst 8510 MSR LightStream 1010	Allows configuration of the same NSAP address in the source-end of two different ATM interfaces.	atm soft redundancy group atm soft redundancy member load-balance nsap-address (redundant soft VC) show atm soft redundancy group show atm addresses

Table Of Contents

New and Changed Features