|
administrative access, configuring 2-4
baud rate, for terminal emulation 1-1
card/subcard/port, defined 1-3
changes, saving 1-9
command modes, understanding 1-2
CPU card 2-4
data bits, for terminal emulation 1-1
disabling a command or feature 1-8
displaying the configuration 1-8
ELAN 4-2
ESI 4-3
LANE support 4-3
switch configuration, LANE 4-13
LANE 4-9
PVCs 3-9
soft PVCs 3-14
SVCs 3-2
tag switching 5-7
online command-line interface 1-2
using the question mark 1-2
interface numbering 1-3
IP address, configuring for remote Telnet access 2-4
addressing considerations 4-3
BUS 4-3
components 4-2
configuration examples 4-9
Ethernet and Token Ring support 4-3
example configurations 4-9
LEC 4-2
LECS 4-2
LES 4-3
router and LAN switch requirements 4-4
rules for configuration 4-4
LE_ARP 4-3
LES/BUS 4-8
MAC addresses 4-2
modes, command 1-2
naming the ATM switch router 2-1
numbering, card/subcard/port 1-3
OSPF 5-1
parity, for terminal emulation 1-1
password, creating 2-3
port numbering 1-3
processor card 2-4
prompt, changing 2-1
ATM switch router configuration 3-10
router configuration 3-12
remote administrative access, configuring 2-4
restricting access, creating a password 2-3
LANE 4-12
PVCs 3-12
soft PVCs 3-17
SVCs 3-2
tag switching 5-6, 5-7, 5-8, 5-9
saving changes 1-9
security, creating a password 2-3
slot numbering 1-3
ATM switch router configuration 3-14
router configuration 3-17
SSRP 4-3
stop bits, for terminal emulation 1-1
ATM switch router configuration 3-1
router configuration 3-2
ATM switch router configuration 5-2 to 5-5
example configuration 5-7
requirements, hardware and software 5-1
router configuration 5-6
TDP 5-2
Telnet access, configuring 2-4
terminal emulation, recommended settings 1-1
Token Ring, LANE support 4-3
tunnels, VP 3-21
unauthorized access, preventing 2-3
viewing the configuration 1-8
VP tunnels 3-21
Posted: Mon Mar 3 11:07:05 PST 2003
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.