|
|
The BBSM Hotspot Version 1.0 Recovery CD contains an image that can be used only with the BBSM Hotpot 1.0 server.
 |
Caution Loading this image onto any other hardware platform will render the system inoperable. This CD will erase all data on the server and revert the server to its default state. |
Use this procedure to load the BBSM Hotspot 1.0 image onto your server:
Step 2 Reboot the server.
Your system boots up to the You have booted the BBSM Hotspot 1.0 Image CD for the HP/Compaq Evo D51S server, Dated 1-3-2003 screen.
Step 3 Press Enter. The autoload procedure begins.
Wait approximately seven minutes for the image to be loaded on the server.
Step 4 From the Imaging is now complete! screen, remove the CD and reboot the server again.
After you load the image, the BBSM Hotspot 1.0 server is ready to be configured.
This document provides information about the BBSM Hotspot:
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
Copyright © 2003 Cisco Systems, Inc. All rights reserved.
Posted: Tue Feb 4 09:07:41 PST 2003
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
