Configuration Notes for Cisco 1700 Series Routers

• Configuring Locale-Based Multifrequency Tones on Cisco 1751 and Cisco 1760 Routers

• Configuring ISDN NSF on Cisco 1751 and Cisco 1760 Routers

• Configuring a Single-Port Ethernet WIC on a Cisco 1700 Series Router
  Configuring the WIC-1ENET interface card.

• G.SHDSL ATM WIC (WIC-1SHDSL) Installation on the Cisco 1700 Series Router
  G.SHDSL ATM WIC (WIC-1SHDSL) installation information for the Cisco 1700 series router.

• Configuring an ADSL WAN Interface Card on Cisco 1700 Series Routers
  ADSL WAN interface card configuration information for Cisco 1700 series routers. Updated for Voice QoS enhancements, October, 2002. Updated for Dying Gasp: ADSL over ISDN, May, 2003; ADSL over POTS, July 2003.

• Installing and Upgrading Memory in Cisco 1700 Series Routers
  How to install or upgrade memory in a Cisco 1700 series router. Updated to Online only. Update includes 1721 and 1760 routers.

• Installing the Virtual Private Network Module in a Cisco 1700 Series Router
  Installation document for 1720/1750/1751 VPN module.

• Voice Software Enhancements for Cisco 1750 and 1751 Routers
  Configuration support for Caller ID and Direct Inward Dialing (DID) on 2-port FXO-M1, 2-port FXO-M2, and 2-port analog DID voice interface cards.

• Configuration of Software-Based Compression on Cisco 1700 Series Routers with Hardware Encryption

• Installing and Removing Packet Voice/fax DSP Modules
  Configuration note for installing voice/fax DSP modules in Cisco 1750 and Cisco 1751 series routers.

• Analog Modem Interface Card Configuration Notes for Cisco 1700 Series Routers

• Cisco Easy VPN Client for the Cisco 1700 Series Routers
  Configuring and monitoring the Cisco Easy VPN client feature to support the Cisco 1700 series routers.

• Survivable Remote Site Telephony (SRST) for the Cisco 1750 and Cisco 1751 Routers
  SRST command supporting the 2-port FXO-M1, 2-port FXO-M2, and 2-port analog DID voice interface cards.

• Clock Configuration for Cisco 1751/60 Routers
  Information for configuring clocking on interface cards in Cisco 1751/1760 routers: clock sourcing for data only images, and time-division multiplexing (TDM) clocks for voice images.

• 4-Port FXS/DID Voice Interface Card Support on the Cisco 1751 and Cisco 1760 Routers
  Babygrand project

• DSP Optimization on the Cisco 1751, Cisco 1760, and Cisco 2801 Routers

• Cisco 1 and 2-port T1/E1 Multiflex Voice/WAN Interface Cards for the Cisco 1700 Series Router
  Single- and dual-port T1 or E1 trunk interfaces for voice, data, and integrated voice/data applications on the Cisco 1751 and 1760 Routers.

• Cisco 1- and 2-port T1/E1 Multiflex Voice/WAN Interface Cards for the Cisco 1721 Router
  Single- and dual-port T1 or E1 trunk interfaces for data applications on the Cisco 1721 Router.

• 4-Port Ethernet Switch Configuration Notes for the Cisco 1700 Series Routers
  Provides configuration guidelines for the 4-port Ethernet switch integrated on the Cisco 1711 and Cisco 1712 Security Access routers, and the WIC-4ESW 4-port Ethernet switch that can be used with Cisco 1721, Cisco 1751, and Cisco 1760 routers.

• Installing and Upgrading the Boot ROM in Cisco 1700 Series Routers
  How to install or upgrade the Boot ROM in your Cisco 1700 series router.

• Configuring 2-port ISDN BRI Interface Cards for the Cisco 1751 and Cisco 1760 Routers
  Configuration information for dual-port ISDN Basic Rate Interface (BRI) voice interface cards (VICs) as applied to Cisco 1751 and 1760 routers.

• FXO, FXS, and E&M Voice Card Interface Support on Cisco 1700 Series Routers
  Configuration information for second generation VICs on Cisco 1751 and 1760 routers. -02 adds CAMA functionality on FXO cards.