home | O'Reilly's CD bookshelfs | FreeBSD | Linux | Cisco | Cisco Exam  


Building Internet Firewalls

Building Internet FirewallsSearch this book
Previous: C.2 A Data Communications Model Appendix C
TCP/IP Fundamentals
Next: C.4 Network Access Layer
 

C.3 TCP/IP Protocol Architecture

While there is no universal agreement about how to describe TCP/IP with a layered model, it is generally viewed as being composed of fewer layers than the seven used in the OSI model. Most descriptions of TCP/IP define three to five functional levels in the protocol architecture. The four-level model illustrated in Figure 13.6 is based on the three layers (Application, Host-to-Host, and Network Access) shown in the DOD Protocol Model in the DDN Protocol Handbook, Volume 1 , with the addition of a separate Internet layer. This model provides a reasonable pictorial representation of the layers in the TCP/IP protocol hierarchy.

Figure 13.6: Layers in the TCP/IP protocol architecture

Figure 13.6

As in the OSI model, data is passed down the stack when it is being sent to the net, and up the stack when it is being received from the network. The four-layered structure of TCP/IP is seen in the way data is handled as it passes down the protocol stack from the Application Layer to the underlying physical network. Each layer in the stack adds control information to ensure proper delivery. This control information is called a header because it is placed in front of the data to be transmitted. Each layer treats all of the information it receives from the layer above as data and places its own header in front of that information. The addition of delivery information at every layer is called encapsulation . ( Figure 13.7 illustrates this.) When data is received, the opposite happens. Each layer strips off its header before passing the data on to the layer above. As information flows back up the stack, information received from a lower layer is interpreted as both a header and data.

Figure 13.7: Data encapsulation

Figure 13.7

Each layer has its own independent data structures. Conceptually a layer is unaware of the data structures used by the layers above and below it. In reality, the data structures of a layer are designed to be compatible with the structures used by the surrounding layers for the sake of more efficient data transmission. Still, each layer has its own data structure and its own terminology to describe that structure.

Let's look more closely at the function of each layer, working our way up from the Network Access Layer to the Application Layer.


Previous: C.2 A Data Communications Model Building Internet Firewalls Next: C.4 Network Access Layer
C.2 A Data Communications Model Book Index C.4 Network Access Layer