To discuss computer networking, it is necessary to use terms that have special meaning in data communications. Even other computer professionals may not be familiar with all the terms in the networking alphabet soup. As is always the case, English and computer-speak are not equivalent (or even necessarily compatible) languages. Although descriptions and examples should make the meaning of the networking jargon more apparent, sometimes terms are ambiguous. A common frame of reference is necessary for understanding data communications terminology.
An architectural model developed by the International Standards Organization ( ISO ) is frequently used to describe the structure and function of data communications protocols. This architectural model, called the Open Systems Interconnect ( OSI ) Reference Model, provides a common reference for discussing communications. The terms defined by this model are well understood and widely used in the data communications community - so widely used, in fact, that it is difficult to discuss data communications without using OSI 's terminology.
The OSI Reference Model contains seven layers that define the functions of data communications protocols. Each layer of the OSI model represents a function performed when data is transferred between cooperating applications across an intervening network. Figure 13.5 identifies each layer by name and provides a short functional description for it. Looking at this figure, you can see that the protocols are like a pile of building blocks stacked one upon another. Because of this appearance, the structure is often called a stack or protocol stack .
A layer does not define a single protocol; it defines a data communications function that may be performed by any number of protocols. Therefore, each layer may contain multiple protocols, each providing a service suitable to the function of that layer. For example, a file transfer protocol and an electronic mail protocol both provide user services and both are part of the Application Layer. Every protocol communicates with its peer. A peer is an implementation of the same protocol in the equivalent layer on a remote system (i.e., the local file transfer protocol is the peer of a remote file transfer protocol). Peer level communications must be standardized for successful communications to take place. In the abstract, each protocol is only concerned with communicating to its peer; it does not care about the layer above or below it.
However, there must also be agreement on how to pass data between the layers on a single computer, because every layer is involved in sending data from a local application to an equivalent remote application. The upper layers rely on the lower layers to transfer the data over the underlying network. Data is passed down the stack from one layer to the next, until it is transmitted over the network by the Physical Layer protocols. At the remote end, the data is passed up the stack to the receiving application. The individual layers do not need to know how the layers above and below them function; they only need to know how to pass data to them. Isolating network communications functions in different layers minimizes the impact of technological change on the entire protocol suite. New applications can be added without changing the physical network, and new network hardware can be installed without rewriting the application software.
Although the OSI model is useful, the TCP/IP protocols don't match its structure exactly. Therefore, in our discussions of TCP/IP we use the layers of the OSI model in the following way:
The terminology of the OSI reference model helps us describe TCP/IP , but to fully understand it, we must use an architectural model that more closely matches the structure of TCP/IP . The next section introduces the protocol model we'll use to describe TCP/IP .