Content starts here
HP-UX Versions
An Ignite-UX server must run 11i v1 (B.11.11), 11i v2 (B.11.23), or
11i v3 (B.11.31).
Hardware
Ignite-UX runs on HP Integrity server blades and systems, and PA-RISC systems.
Disk Space
Ignite-UX servers must have at least 2 GB of free disk space available in
/opt/ignite to support installation of all three HP-UX 11i releases. To save
space, support only those HP-UX versions you plan to install or recover.
Ignite-UX servers typically require significant space in
/var/opt/ignite to
support client systems, store software depots, and save recovery archives.
Default file system sizes are unlikely to be sufficient for an Ignite-UX server.
NOTE: If you are installing HP-UX 11i v3, your client boot disk must be at
least 9 GB. HP-UX 11i v3 requires more space on the HP-UX boot disk than
prior HP-UX releases.
Memory
Client installation and recovery performance is typically limited by network
throughput. Normally, no special consideration for server system memory
is needed.
NOTE: See the
Ignite-UX Release Notes for client systems' memory requirements.
For more information on Ignite-UX requirements,
see the Ignite-UX Administration Guide.
