Chapter 9 Booting and Installing HP-UX From the Server Using the Client Console

Table of Contents

Preparing the Client for Installation

Making Boot Decisions When Using the Client Console

Boot Using the Network
Boot Using Media

Using bootsys on the Client Console

Booting PA-RISC Clients from the Console

Booting Itanium-Based Clients using the Network

Direct Boot Profiles for Itanium-Based Systems

The dbprofile Command
The lanboot Command

Installing HP-UX From the Client Console

Managing Speed and Duplexing of LAN Interfaces Executing Network Boots

Examples

This chapter discusses booting and installing HP-UX on clients from the server using the client console. Ignite-UX can be run in terminal user interface (TUI) mode on the client system. Topics discussed are:

“Preparing the Client for Installation ”
“Making Boot Decisions When Using the Client Console”
“Using bootsys on the Client Console”
“Booting PA-RISC Clients from the Console ”
“Booting Itanium-Based Clients using the Network”
“Direct Boot Profiles for Itanium-Based Systems”
“Installing HP-UX From the Client Console”
“Managing Speed and Duplexing of LAN Interfaces Executing Network Boots”

See the HP-UX Installation and Update Guide available from http://www.docs.hp.com/ for instructions on how to install HP-UX from the Operating Environment DVD media.

Chapter 9 Booting and Installing HP-UX From the Server Using the Client Console

Technical documentation

» Table of Contents

» Glossary

» Index