 |
» |
|
|
|
|  | |
You can find bootable devices by using any one of the following
procedures: Procedure 5-3 Finding Bootable Devices (BCH Menu) From the BCH Main Menu, issue the SEARCH command
to find bootable devices. The BCH Menu is available only on HP 9000 systems. Access the BCH
Main Menu for the nPartition whose bootable devices you want to list. Login to the service processor (MP or GSP) and enter CO to
access the Console list. Select the nPartition console. When accessing the
console, confirm that you are at the BCH Main Menu (the Main
Menu: Enter command or menu> prompt). If at a BCH menu
other than the Main Menu, then enter MA to return to the
BCH Main Menu. From the BCH
Main Menu, issue the SEARCH command to find and list bootable
devices in the nPartition. The SEARCH command
reports all potential boot devices it locates. |
---- Main Menu ---------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|HAA|ALT|<path>] Boot from specified path
PAth [PRI|HAA|ALT] [<path>] Display or modify a path
SEArch [ALL|<path>] Search for boot devices
ScRoll [ON|OFF] Display or change scrolling capability
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
REBOOT Restart Partition
RECONFIGRESET Reset to allow Reconfig Complex Profile
----
Main Menu: Enter command or menu > SEARCH
Searching for potential boot device(s)
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path# Device Path (dec) Device Type
----- ----------------- -----------
P0 0/0/1/0/0.15 Random access media
P1 0/0/1/0/0.12 Random access media
P2 0/0/1/0/0.11 Random access media
P3 0/0/1/0/0.9 Random access media
P4 0/0/1/0/0.8 Random access media
P5 0/0/1/0/0.6 Random access media
Main Menu: Enter command or menu > |
|
The SEARCH command lists up to the first
20 potential boot devices that it locates, and lists each with a path number
(P0 through P19). To boot a device that was reported by the SEARCH command,
specify the path number or the full device path. For example, BOOT
P0 would boot the path listed as path number P0. Exit the console
and service processor interfaces if finished using them. To
exit the BCH environment type ^B (Control-B);
this exits the nPartition console and returns to the service processor Main
Menu. To exit the service processor, type X at the Main
Menu.
Procedure 5-4 Finding Bootable Devices (EFI Shell) From the EFI Shell environment, issue the map command
to list bootable devices. The EFI Shell is available only on HP Integrity
systems. Access the EFI
Shell environment for the nPartition whose bootable devices you want to list. Login to the service processor (MP or GSP) and enter CO to
access the Console list. Select the nPartition console. When accessing the console, confirm that you are at the
EFI Boot Manager menu (the main EFI menu). If at another EFI menu, select
the Exit option from the sub-menus until you return to
the screen with the EFI Boot Manager heading. From the EFI Boot Manager menu, select the EFI
Shell menu option to access the EFI Shell environment. At the EFI Shell,
issue the map command to list all disk devices with a potentially
bootable EFI System Partition. For details see the help
map command. Also see the help search command
for details on using the search command to load drivers
for bootable devices. Exit the console
and service processor interfaces if finished using them. To
exit the EFI environment type ^B (Control-B);
this exits the nPartition console and returns to the service processor Main
Menu. To exit the service processor, type X at the Main
Menu.
|
Printable version
