Table C-1 Access Point Specifications
Category
|
802.11g Radio Specifications
|
802.11a Radio Specifications
|
802.11b Operation
|
802.11g Operation
|
Size
|
7.53 in. W x 7.53 in. D x 1.31 in. H
19.13 cm W x 19.13 cm D x 3.33 cm H
|
Indicators
|
Tri-color Status LED indicator on the top panel and two bi-color LED indicators (radio and Ethernet) in the cable bay
|
Connectors
|
Cable bay (left to right)
Power connector (for plug-in AC power module); RJ-45 connector for 10BASE-T or 100BASE-T Ethernet connections; upside down RJ-45 connector for serial connections.
|
Input Voltage
|
48 VDC (nominal)
|
Input Power
|
12.95 W (typical)
|
Operating Temperature
|
Base unit:
32 to 104oF (0 to 40oC)
1130AG series power module:
32 to 104oF (0 to 40oC)
|
Weight
|
Without mounting hardware:
1.48 lbs (0.67 kg)
|
Power Output
|
100 mW (20 dBm)
50 mW (17 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)
(Depending on the regulatory domain in which the access point is installed)
|
50 mW (17 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)
(Depending on the regulatory domain in which the access point is installed)
|
Autonomous access points
50 mW (17 dBm)
30 mW (15 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)
Lightweight access points
50 mW (17 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)
(Depending on the regulatory domain in which the access point is installed)
|
Antenna
|
A diversity system with two integrated 3-dBi antennas.
|
A diversity system with two integrated 4.5-dBi antennas.
|
Frequency
|
2.400 to 2.497 GHz
(Depending on the regulatory domain in which the access point is installed)
|
5.15 to 5.25 GHz
5.25 to 5.35 GHz
5.725 to 5.85 GHz
(Depending on the regulatory domain in which the access point is installed)
|
Modulation
|
Complementary Code Keying (CCK)
|
Orthogonal Frequency Division Multiplex (OFDM)
|
Subcarrier modulation
|
BPSK (1 Mbps)
QPSK (2 Mbps)
CCK (5.5 and 11 Mbps)
|
BPSK (6 and 9 Mbps)
QPSK (12 and 18 Mbps)
16-QAM (24 and 36 Mbps)
64-QAM (48 and 54 Mbps)
|
BPSK (6 Mbps and 9 Mbps)
QPSK (12 Mbps and 18 Mbps)
16-QAM (24 and 36 Mbps)
64-QAM (48 and 54 Mbps)
|
Data rates
|
1, 2, 5.5, and 11 Mbps
|
6, 9, 12, 18, 24, 36, 48, and 54 Mbps
|
Typical indoor range
|
450 ft at 1 Mbps
360 ft at 11 Mbps
|
400 ft at 6 Mbps
100 ft at 54 Mbps
|
325 ft at 6 Mbps
80 ft at 54 Mbps
|
Compliance
|
The 1130AG series access point complies with UL 2043 for products installed in a building's environmental air handling spaces, such as above suspended ceilings.
Caution  Only the fiber-optic power injector (AIR-PWRINJ-FIB) has been tested to UL 2043 for operation in a building's environmental air space; no other power injectors or power modules have been tested to UL 2043 and they should not be placed in a building's environmental air space, such as above suspended ceilings.
|
Safety
|
Designed to meet:
UL 60950-1
CAN/CSA C22.2 No. 60950-1
UL 2043
EN 60950-1
IEC 60950-1
|
Radio Approvals
|
FCC Parts 15.247
Canada RSS-210
Japan ARIB-STD-33B
Japan ARIB-STD-66
Europe EN-300.328
|
FCC Part 15.407
Canada RSS-210
Japan ARIB STD-T71
EN 301.893
|
EMI and Susceptibility
|
FCC Part 15.107 and 15.109 Class B
ICES-003 Class B (Canada)
EN 55022 B
EN 60601-1-2:2001
AS/NZS 3548 Class B
VCCI Class B
EN 301.489-1
EN 301.489-17
|
RF Exposure
|
OET-65C
RSS-102
ANSI C95.1
|
