|
|
The following sections summarize the steps for installing and starting Design Studio:
For more detailed information, see the Design Studio User Guide.
Design Studio requires the following:
 |
Note JRE is on the CTE Design Studio CD-ROM and is also available from http://www.javasoft.com. JRE requires an additional 16 MB of disk space. Design Studio does not work with other versions of JRE or the Java Development Kit (JDK). |
The network connection can be through a proxy server, which you specify when logging in to Design Studio.
To install Design Studio, perform these steps:
Step 2 Insert the Design Studio CD-ROM into your CD-ROM drive.
If auto-start is enabled on your computer, the installer starts.
If auto-start is not enabled on your computer, double-click the drive icon for your CD-ROM, and then double-click CiscoCTEDesignStudio.exe.
Step 3 Follow the instructions in the installer.
You may be asked to restart your PC during the installation. After you restart your PC, the Design Studio installation wizard continues the installation.
By default, Design Studio is installed in C:\Program Files\Cisco\CTE\Design Studio\version.
Step 4 Follow the instructions in Chapter 2 of the Design Studio User Guide to install and configure device simulators used to preview and test your work in Design Studio.
To start Design Studio, you need the following login information from the administrator who set up the CTE:
To start Design Studio, perform these steps:
The Log in dialog box appears.
Step 2 Enter your username and password.
Step 3 Enter the IP address of the CTE.
Step 4 If necessary, change the upload port number.
The default upload port number is 9001. You might need to change the port number if your firewall redirects ports. Contact your CTE administrator if you do not know which port to use.
Step 5 If the computer on which Design Studio is installed is connected to the CTE through a proxy server, click Use Proxy and enter the host and port for HTTP and HTTPS connections.
Step 6 Click OK.
If you cannot connect to a CTE, verify that your computer has a network connection to a running CTE. Contact your CTE administrator for help.
Posted: Mon Aug 18 18:29:30 PDT 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
