|
|
The Design Studio application is provided with the Cisco CTE 1400. The Design Studio CD-ROM also includes the Java 2 Runtime Environment (JRE).
Additional third-party components, not included on the Design Studio CD-ROM, can be used to preview the results of your transformations in PC-based wireless device simulators.
The following sections describe how to install Design Studio and the companion third-party applications and how to start Design Studio:
The Design Studio application requires the following:
 |
Note JRE is on the Cisco CTE 1400 Design Studio CD-ROM and is also available from http://www.javasoft.com. JRE requires an additional 16 MB of disk space. Design Studio does not work with other versions of JRE or the Java Development Kit (JDK). |
To install Design Studio, perform these steps:
Step 2 Insert the Cisco CTE 1400 Design Studio CD-ROM into your CD-ROM drive.
If auto-start is enabled on your PC, the installer starts.
If auto-start is not enabled on your PC, double-click the drive icon for your CD-ROM and double-click Cisco CTE 1400 Design Studio.exe.
Step 3 Follow the instructions in the installer.
You may be asked to restart your PC during the installation. After you restart your PC, the Design Studio installation wizard continues the installation.
By default, Design Studio is installed in C:\Program Files\Cisco\CTE 1400\Design Studio\2.0.
For upgrade instructions, refer to the Release Notes for Cisco CTE 1400 and Design Studio.
To start Design Studio, you need the following login information from the system administrator who set up the Cisco CTE 1400:
To start Design Studio, perform these steps:
The Log in to the Cisco CTE 1400 dialog box appears.
Step 2 Enter your username and password.
Step 3 Enter the IP address of the CTE you want to use.
Step 4 Enter the server upload port number.
The default upload port is 9001. You might need to change the port number if your firewall redirects ports. Contact your CTE administrator if you do not know which port to use.
Step 5 Click OK.
|
Note If you cannot connect to a Cisco CTE 1400, verify that your PC has a network connection to a running CTE. Contact your CTE administrator for help. |
Your password for Design Studio is set on the Cisco CTE 1400. Contact your CTE administrator to change it.
When you log in to Design Studio, you connect to a specified Cisco CTE 1400. You can later connect to a different CTE without leaving Design Studio. For example, you might need to switch between two CTEs used for testing.
To connect to a CTE, perform these steps:
Step 2 Complete the Log in to the Cisco CTE 1400 dialog box as described in the "Starting Design Studio" section.
If authentication fails, contact your CTE administrator. Either your username and password are not set in the CTE or you are not using the username and password set in the CTE.
|
Note The following information is intended for the individual responsible for administering the Cisco CTE 1400. |
You can upload a digital certificate to the Cisco CTE 1400 in order to secure transactions. The certificate must have the following characteristics:
If the private key is encrypted, you must use a CTE console to start the CTE each time the appliance powers up.
To upload a certificate, perform these steps:
Step 2 In the Open dialog box, navigate to the certificate file and click Open.
For the new certificate file to go into effect, your CTE administrator must restart the CTE.
The Openwave Mobile Browser Simulator enables you to view on your PC how your transformed web pages will appear on many wireless phones.
To download and install the Openwave Simulator, perform these steps:
Step 2 Navigate to the Software Development Kit (SDK) downloads area.
Step 3 Download "SDK WAP Edition 5.0" to your PC.
Step 4 After the download completes, double-click the .exe file you downloaded.
Step 5 Follow the instructions in the installation wizard.
Step 6 Click Finish.
You will be asked to restart your computer to complete the installation.
We recommend that you put a shortcut to the Openwave Simulator on your desktop for convenient access when you are using Design Studio.
To create a shortcut to the simulator application file, perform these steps:
By default, that directory is C:\Program Files\Openwave\SDK WAP 5.0.
Step 2 Right-click the OWHost.exe file.
Step 3 From the menu, choose Create Shortcut.
Windows creates a shortcut named "Shortcut to OWHost.exe."
Step 4 Drag the shortcut to your desktop.
To configure the Openwave Simulator, perform these steps:
Step 2 In the Openwave SDK window, choose Device Settings from the Simulator menu.
Step 3 Click Proxy 1: Auto provisioned gateway.
Step 4 Click OK.
For information on using the simulator to preview transformations, see the "Using the Openwave Mobile Browser Simulator" section.
The Go.Web Simulator enables you to view on your PC how your transformed web pages will appear on RIM devices.
To download and install the Go.Web Simulator, perform these steps:
Step 2 Click the link to the Developer Zone.
Step 3 Complete the sign-in information.
Step 4 Download the Go.Web Simulator.
Step 5 After the download completes, double-click the .exe file you downloaded.
Step 6 Follow the instructions in the installation wizard.
The last page of the installation wizard gives you the option of starting the Go.Web Simulator.
Step 7 Click the option to start the Go.Web Simulator and click Finish.
The Go.Web Simulator is ready for use with Design Studio. We recommend that you put a shortcut to the Go.Web Simulator on your desktop for convenient access when you are using Design Studio.
To create a shortcut to the simulator application file, perform these steps:
By default, that directory is C:\Program Files\GoAmerica\GoWebSimulator version.
Step 2 Right-click the SimGoWeb.exe file.
Step 3 From the menu, choose Create Shortcut.
Windows creates a shortcut named "Shortcut to SimGoWeb.exe."
Step 4 Drag the shortcut to your desktop.
For information on using the simulator to preview transformations, see the "Using the Go.Web Simulator" section.
The CTE determines how to transcode a site for a particular device based on settings in a Device Definition File (DDF). For example, the CTE uses the specifications in a DDF to determine whether to use cHTML or WML for a device and how to handle the images it sends to a device. You can use Design Studio to tune those specifications, such as to define different display characteristics for various WAP phones.
Design Studio also enables you to import a DDF and either replace the current DDF or merge changes into it.
A DDF specifies device information such as the following:
The following sections describe how to work with a DDF file:
You ordinarily will not need to change a DDF unless you want to make changes such as the following:
To change a device definition, perform these steps:
Step 2 In the left pane of the Edit DDF window, click the device type you want to change.
Step 3 In the right pane of the Edit DDF window, scroll to the value you want to change and right-click it.
Step 4 Choose Edit Value from the shortcut menu.
Step 5 In the Edit Value dialog box, type the new value and click OK.
Step 6 To save the DDF on your computer, choose Save DDF to Disk from the File menu.
Step 7 To publish the DDF to the CTE, choose Upload to Server from the File menu.
Step 8 To return to Design Studio, choose Return to Studio from the File menu.
You add a device definition to support a new device that is not included in the DDF or to uniquely define a device that is already listed in the useragent element for a device type. For example, the useragent element for WAP devices lists several types of devices. You could remove "Ericsson" from that list and create a device definition just for Ericsson.
To add a device definition, perform these steps:
Step 2 From the Edit menu in the Edit DDF window, choose Add New Device.
"New Device" displays at the end of the device list in the left pane.
Step 3 In the right pane of the Edit DDF window, right-click the value New Device.
Step 4 Choose Edit Value from the shortcut menu.
Step 5 In the Edit Value dialog box, type the name of the device and click OK.
Step 6 Scroll to a value you want to change, right-click it, and choose Edit Value from the shortcut menu.
Step 7 In the Edit Value dialog box, type the new value and click OK.
Step 8 Repeat Step 6 and Step 7 for each value you want to change.
Step 9 If you are defining a device that is already listed in the useragent element of another device type, select that device type in the left pane of the Edit DDF window and remove the device from the useragent element.
Step 10 To save the DDF on your computer, choose Save DDF to Disk from the File menu.
Step 11 To publish the DDF to the CTE, choose Upload to Server from the File menu.
Step 12 To return to Design Studio, choose Return to Studio from the File menu.
Posted: Mon Aug 18 17:15:34 PDT 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
