|
This appendix illustrates typical cable management and space requirements for various system configurations in the Cisco cabinet. It also contains a table with the height of Cisco components in inches, centimeters, and rack-mount units (RMUs). This can help in the calculation of height requirements for individual setups. The last illustration shows the bracket installation in the Cisco (for a BPX switch, in this case). The information is grouped as follows:
Table A-1 lists Cisco cabinet dimensions and the heights of components that may be installed in the cabinet.
Components | Unit Height | ||
---|---|---|---|
Inches | CM. | RMUs | |
MGX 8220 Card Cage | 8.75 | 22.225 | 5 |
MGX 8220 AC Power Supply shelf | 5.25 | 13.335 | 3 |
MGX 8220 Booster Fan Assembly | 3.5 | 8.89 | 2 |
MGX 8220 Cooling Assembly | 5.25 | 13.335 | 3 |
MGX 8220 Exhaust Plenum | 3.5 | 8.89 | 2 |
BPX switch AC Power Supply shelf | 5.25 | 13.335 | 3 |
BPX switch Card Cage | 22.75 | 57.785 | 13 |
IGX switch AC Power Supply shelf | 5.25 | 13.335 | 3 |
IGX switch Booster Fan Assembly | 3.5 | 8.89 | 2 |
IGX switch Card Cage | 17.5 | 44.45 | 10 |
IGX switch Cooling Assembly | 5.25 | 13.335 | 3 |
IGX switch Exhaust Plenum | 3.5 | 8.89 | 2 |
IGX 8410 switch | 24.5 | 62.23 | 14 |
DAS, VNS, and ESP | 5.25 | 13.335 | 3 |
Cabinet | Unit Height | ||
Inches | CM. | RMUs | |
Cisco Cabinet | 71.75 | 1822.45 | 41 |
Figure A-1 shows a back view of an empty Cisco cabinet.
Figure A-2 shows a typical cable management configuration for an IGX-32 switch in a Cisco cabinet.
Figure A-3 through Figure A-9 show various BPX switch configurations.
Figure A-10 through Figure A-12 show various IGX switch configurations.
Posted: Mon Jan 15 19:57:51 PST 2001
All contents are Copyright © 1992--2001 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.