Command
|
Purpose
|
Router# show running-config
|
Displays the configuration.
|
Router# show call-manager-fallback all
|
Displays the detailed configuration of all the Cisco IP phones, voice ports, and dial peers of the Cisco Unified SRST router.
|
Router# show call-manager-fallback dial-peer
|
Displays the output of the dial peers of the Cisco Unified SRST router.
|
Router# show call-manager-fallback ephone-dn
|
Displays Cisco IP phone destination numbers when in call manager fallback mode.
|
Router# show call-manager-fallback voice-port
|
Displays output for the voice ports.
|
Router# show ephone phone
|
Displays Cisco IP phone status.
|
Router# show ephone offhook
|
Displays Cisco IP phone status for all phones that are off hook.
|
Router# show ephone registered
|
Displays Cisco IP phone status for all phones that are currently registered.
|
Router# show ephone remote
|
Displays Cisco IP phone status for all nonlocal phones (phones that have no Address Resolution Protocol [ARP] entry).
|
Router# show ephone ringing
|
Displays Cisco IP phone status for all phones that are ringing.
|
Router# show ephone summary
|
Displays a summary of all Cisco IP phones.
|
Router# show ephone telephone-number phone-number
|
Displays Cisco IP phone status for a specific phone number.
|
Router# show ephone unregistered
|
Displays Cisco IP phone status for all unregistered phones.
|
Router# show ephone-dn tag
|
Displays Cisco IP phone destination numbers.
|
Router# show ephone-dn summary
|
Displays a summary of all Cisco IP phone destination numbers.
|
Router# show ephone-dn loopback
|
Displays Cisco IP phone destination numbers in loopback mode.
|
Router# show voice port summary
|
Displays a summary of all voice ports.
|
Router# show dial-peer voice summary
|
Displays a summary of all voice dial peers.
|
Prior to version 4.0, the name of this product was Cisco SRST.
