|
|
Use these topics to install ALI Formatting Tool (AFT):
The ALI Formatting Tool (AFT) requires the following software components to operate:
The ALI Formatting Tool (AFT) supports all hardware platforms supported by Cisco ER. Refer to the Cisco Emergency Responder Administration Guide for Cisco ER-supported Cisco Media Convergence Server (MCS) hardware platforms.
 |
Note You must install AFT on the same server with Cisco ER. |
The ALI Formatting Tool (AFT) is downloadable from the Internet. To install AFT, perform the following steps:
Step 2 Use a web browser to access the following URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/aft
Step 3 Download the AFT installation file that is specific to your service provider.
The AFT .exe files are named as shown here:
CER-aft-<serviceprovider>.<mainrelease> - <minorrelease> -<maintrelease>.exe
where serviceprovider is the name of your Service Provider
and mainrelease, minorrelease and maintrelease make up the AFT release number.
For example, to select the SBC Southwestern Bell AFT, click on: CER-aft-SBC_Southwestern_Bell.1-1-1.exe
Step 4 Double-click on the downloaded file to launch the installer.
The Welcome to the ALI Formatting Tool (AFT) Installation Wizard screen appears.
Step 5 At this point, the installation checks for the presence of Cisco ER 1.1 or later.
If Cisco ER 1.1 or later is not present, you are prompted to install it. The installation of AFT will not continue until Cisco ER 1.1 or later is present.
Step 6 Click Next.
The License Agreement Screen appears.
Step 7 Select Accept and click Next.
The User Information Screen appears.
Step 8 Enter the user name and organization information and click Next.
Step 9 Select administrator rights by clicking on one of the following choices:
Step 10 Click Next.
The Ready to Install screen appears.
Step 11 Click Next.
Step 12 To test that the application successfully loaded, install the new shortcut path and launch the AFT application. Go to:
For example, for SBC Southwestern Bell, go to:
Start > Programs > Cisco Emergency Responder > AFT > SBC_SouthwesternBell (NENA 2.0)
b. To log in to AFT, enter your Cisco ER Main Administrator or ERL Administrator login ID and Password.
Posted: Thu Mar 6 11:58:07 PST 2003
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.